Professional Documents
Culture Documents
Week 1 Session 1 - Tutorial Questions
Week 1 Session 1 - Tutorial Questions
Calculate the maximum Design Bending Moment and shear forces for the beam shown
below due to variable loads only:
(Answer: Mmax = 281.3kNm - remember load factors & Maximum shear = 93.7kN)
Tutorial Question 2:
Calculate the maximum Design Bending Moment and shear forces for the beam below.
Also calculate the deflection at mid span:
The beam is a 457 x 191 x 67kg UB S275
(Answer: Mmax = 225kNm - remember load factors, Maximum shear = 75kN &
Maximum deflection = 21mm at mid span)
1
3039EXQ
Tutorial Question 3:
Calculate the maximum Design Bending Moment and shear forces for the beam below.
Also calculate the deflection at mid span due to Variable Loads Only:
The beam is a 457 x 191 x 98 kg UB S275
(Answer: Mmax = 274.1kNm - remember load factors, Maximum shear = 182.7kN &
Maximum deflection = 2.4mm at mid span)
Tutorial Question 4:
Calculate the maximum Design Bending Moment and shear forces for the beam below.
Also calculate the deflection at mid span due to Variable Loads Only:
The beam is a 457 x 191 x 98kg UB S275
(Answer: Mmax = 238.5kNm - remember load factors, Maximum shear = 203.3kN &
Maximum deflection = 0.973mm at mid span)
2
3039EXQ
Tutorial Question 5:
Consider the simply supported fully restrained S275 - 610 x 229 x 101UB shown
below. In accordance with BS EN 1993 determine if the beam is satisfactory when subject
to the CHARATERISTIC loads as shown.
(Answer: Mpl,Rd = 792kNm & Maximum deflection @ mid span = 5.4mm < 9000/360 =
25.0mm)