Professional Documents
Culture Documents
UNIT-3 ASSIGNMENT (Objective Type) : 1. Email
UNIT-3 ASSIGNMENT (Objective Type) : 1. Email
1. Email *
4. SECTION *
A1
A2
5. BRANCH *
CS
IT
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 1/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
leakage flux
Primary winding
Secondary winding
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 2/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
10. The change in volume of transformer cooling oil due to variation of 1 point
atmospheric temperature during day and night is taken care of by which part
of transformer ? *
(a) Conservator
(b) Bushings
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 3/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
12. When a given transformer is run at its rated voltage but reduced frequency, 1 point
its *
13. If the supply frequency to the transformer is increased the iron loss will * 1 point
a) not change
(b) decrease
(c) increase
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 4/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) will be hot because of heavy iron losses taking place in it due to high flux density
16. Which type of winding is used in 3-phase shell type transformer ? * 1 point
17. For the parallel operation of single-phase transformers it is necessary that 1 point
they should have *
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 5/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
(d) to arrest flow of moisture when outside air enters the transformer.
20. The secondary winding of which of the following transformers is always kept 1 point
closed ? *
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 6/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
(a) frequency
(b) 15 MVA
(c) 50 MVA
(a) on full-load
(b) on overload
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 7/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
25. The secondary winding of a current transformer whose primary Is carrying 1 point
current should *
a) not be open-circuited
27. Transformer for constant voltage applications is considered good if its 1 point
voltage regulation is *
(a) low
(b) high
(c) zero
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 8/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
28. For given effective applied voltage of constant frequency eddy current 1 point
losses *
29. The main advantage of an autotransformer over a two winding transformer is 1 point
that
(d) only one winding is used as a result there is substantial saving in material
30. If the supply frequency of a transformer increases, the secondary output 1 point
voltage of the transformer *
Increase
Decrease
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 9/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
Full load
50% load
80% load
no load
32. . The leakage flux in a transformer depends upon the value of * 1 point
Frequency
Mutual Flux
Load current
Applied Voltage
d) Any substance through which the magnetic lines of force can pass easily
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 10/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Strong magnets
b) Weak magnets
c) Temporary magnets
d) Permanent magnets
a) Moving charges
b) Stationary charges
c) Copper
d) Iron
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 11/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) A/m
b) A-m
c) A
d) unitless
38. When a bar magnet is broken into two pieces, which of the following are 1 point
true? *
39. When an electric current flows into the page, what is the direction of the 1 point
magnetic field? *
a) Clockwise
b) Anti-clockwise
c) Cannot be determined
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 12/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
40. When an electric current flows out of the page, what is the direction of the 1 point
magnetic field? *
a) Clockwise
b) Anti-clockwise
c) Cannot be determined
41. The relation between the direction of current and the direction of magnetic 1 point
field is? *
a) Same direction
b) Opposite direction
c) Perpendicular
d) Unrelated
a) Magnetic constant
b) Electric constant
c) Electrostatic constant
d) Magnetostatic constant
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 13/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
43. A substance whose permeability is less than the permeability of free space 1 point
is? *
a) Diamagnetic
b) Paramagnetic
c) Ferromagnetic
a) Diamagnetic
b) Paramagnetic
c) Ferromagnetic
a) Diamagnetic
b) Paramagnetic
c) Ferromagnetic
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 14/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
46. A substance whose permeability is more than the permeability of free space 1 point
is? *
a) Diamagnetic
b) Paramagnetic
c) Ferromagnetic
a) Henry
b) Henry-m
c) Henry/m
d) Henry/m2
48. Which among the following, is a correct expression for µ0. * 1 point
a) µ0=BH
b) µ0=B/H
c) µ0=H/B
d) µ0=BH2
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 15/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
49. Calculate the magnetic flux density if the magnetic field strength is 2A/m. * 1 point
a) 4*pi*10-7T
b) 8*pi*10-7T
c) 10*pi*10-7T
d) 12*pi*10-7T
50. Calculate the magnetic field strength if the magnetic flux density is 4*piT. * 1 point
a) 10-7/16*pi2A/m
b) 10-7A/m
c) 107A/m
d) 10-7A
51. Calculate the magnetic flux density if the magnetic field strength is 3A/m. * 1 point
a) 4*pi*10-7T
b) 8*pi*10-7T
c) 10*pi*10-7T
d) 12*pi*10-7T
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 16/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Permeance
b) Susceptibility
c) Resistance
d) Conductance
a) Directly proportional
b) Inversely proportional
c) Not related
54. Reluctance is ________________ to the area of cross section the material. * 1 point
a) Directly proportional
b) Inversely proportional
c) Not related
d) Equal
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 17/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
55. When the length of the material increases, what happens to reluctance? * 1 point
a) Increases
b) Decreases
d) Becomes zero
56. When the area of cross section of the material increases, what happens to 1 point
reluctance? *
a) Increases
b) Decreases
d) Becomes zero
a) Resistance
b) Inductance
c) Capacitance
d) Conductance
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 18/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Increases
b) Decreases
d) Becomes zero
59. Calculate the reluctance when the magnetomotive force is 10A turns and the 1 point
flux is 5Wb. *
a) 0.5A/Wb
b) 5A/Wb
c) 10A/Wb
d) 2A/Wb
a) F=ϕS
b) F=ϕ/S
c) F=ϕ2S
d) F=ϕ/S2
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 19/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
b) Magnetomotive Force
d) Magnetomotion Force
a) Ammeter
b) Fluxmeter
c) Voltmeter
d) Multimeter
a) Iron loss
b) Hysteresis loss
c) Voltage loss
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 20/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Diamagnetic materials
b) Ferromagnetic materials
c) Paramagnetic materials
d) Non-magnetic materials
65. When using a fluxmeter, if the flux changes from Φ to -Φ, what happens to 1 point
the current? *
a) Becomes zero
b) Becomes infinity
d) Reverses
66. Why is the coil of a ballistic galvanometer wound on a non- metallic former? 1 point
*
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 21/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) B/H curve
b) H/B curve
c) BH curve
d) B2H curve
69. The primary and secondary of a transformer are ________ coupled but 1 point
_______ connected. *
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 22/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
b) lower values
c) higher values
d) medium values
71. It was needed that to isolate dc noise coming from the transmitted signal, to 1 point
attain the same which machine can be used without suffering significant
loss? *
a) transformer
b) dc machine
c) induction machine
d) stepper motor
a) load on it increases
b) load on it decreases
d) cannot be determined
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 23/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
d) cannot be determined
a) Primary side
b) Secondary side
____________ *
d) Cannot be determined
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 24/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Gi and Bm
b) R1 and X1
c) R2 and X2
d) Cannot be determined
a) frequency
a) R/VK
b) R/K2
c) R2/K2
d) R2/K
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 25/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
a) Circular type
b) Sandwich type
c) Cylindrical type
d) Rectangular type
a) More economical
b) Easy in construction
c) Easy to construct
d) Easy to handle
b) A single 3-phase transformer with the primary and secondary of each phase wound
on three legs of a common core
d) By different method
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 26/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
82. Three phase transformer compare to a bank of 3 single phase transformers is 1 point
____________ *
a) Cheaper
b) Costlier
c) More in space
d) Can’t be determined
c) Faraday’s laws of electromagnetic induction are not valid since the rate of change
of flux is zero
d) Cannot be determined
84. In a transformer the resistance between its primary and secondary is 1 point
______________ *
a) Zero
b) Very small
c) Cannot be predicted
d) Infinite
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 27/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
85. An ideal transformer will have maximum efficiency at a load such that 1 point
_____________
d) cannot be determined
a) Zero
b) Non-zero finite
c) Negative
d) Infinite
i1N1=i2N2
b) i1v1=i2v2
c) i1N2=i2N1
d) v2N1=v1N2
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 28/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
88. For a transformer with primary turns 400, secondary turns 100, if 20A 1 point
a) 80A at secondary
b) 5A at secondary
c) 800A at secondary
d) 40A at secondary
89. Which of the following is not considered in the standard voltage scale for 1 point
power supply in India? *
) 11kV
b) 33kV
c) 66kV
d) 122kV
90. Which of the following equation correctly represents the exact phasor 1 point
diagram of transformer? *
a) V1=E1+I1R1+jI1X1
b) V1=E1+I1R1+jI2X2
c) V2=E2+I1R1+jI1X1
d) V1=E1-I1R1+jI1X1
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 29/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
91. Hysteresis loss and eddy current loss is directly proportional to __________ * 1 point
a) f and f2
b) f2 and f
c) f and f
d) f2 and f2
92. What will happen to hysteresis loss if voltage is doubled, load is doubled and 1 point
frequency is halved? *
a) Will be twice
b) Will be halved
93. In a given transformer for given applied voltage, which of the following 1 point
b) Copper losses
d) Cannot be determined
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 30/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
94. Variations in a hysteresis loss in a transformer (Bmax = maximum flux density) 1 point
____________ *
a) Bmax
b) Bmax1.6
c) Bmax3.83
d) Bmax/2
95. The full-load copper loss of a transformer is 1600 W. At half-load, the copper 1 point
a) 6400 W
b) 1600 W
c) 800 W
d) 400 W
96. If the supply frequency to the transformer is increased, the iron loss will 1 point
___________
a) Not change
b) Decrease
c) Increase
d) Cannot be determined
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 31/32
6/21/2021 UNIT-3 ASSIGNMENT (objective type)
97. Which of the following can measure iron loss of a transformer? * 1 point
c) Frequency meter
98. Which of the following loss in a transformer is zero even at full load?
a) Core loss
b) Friction loss
d) Hysteresis loss
Forms
https://docs.google.com/forms/d/1skrgvOmAtSeRgmSL3JD9czplQkf5HayU5_yCWohTl24/edit 32/32