Professional Documents
Culture Documents
Trane Chiller Data Sheet RTHD
Trane Chiller Data Sheet RTHD
Trane Chiller Data Sheet RTHD
Job Information
Job01
TIG
Unit Information
Capacity 216.00 tons Efficiency 0.675 kW/ton
NPLV 0.430 kW/ton Refrigerant charge (HFC-134a) 222 kg
Full Load Sound Pressure-AHRI Condition 80 dBA
Pressure vessel code ASME pressure vessel code
Refrigeration isolation valves
Oil cooler Without oil cooler
Evaporator Information
Evap leaving temp 6.7 C Evap flow rate 118.6 m3/hr 522.40 gpm
Evap entering temp 12.2 C Evap pressure drop 12.60 ft H2O
Minimum evap flow rate 53.14 234.00 gpm Evap fouling factor 0.00010 hr-sq ft-deg F/Btu
Number of evaporator passes 3 pass Evap fluid freeze point 0.0 C
Evap fluid type Water Evap fluid concentration 0.00
Condenser Information
Cond entering temp 32.2 C Cond flow rate 803.10 gpm
Cond leaving temp 36.4 C Cond pressure drop 19.50 ft H2O
Number of cond passes 2 pass condenser Cond fouling factor 0.00025 hr-sq ft-deg F/Btu
Cond fluid type Water Cond fluid concentration 0.00
Condenser tube type Enhanced fin - copper
Electrical Information
Unit voltage 415 Volt 3 phase Unit hertz 50 Hertz
Unit power 145.90 kW Starter type AdaptiR
Minimum circuit ampacity 290.40 A Maximum overcurrent protection 522.80 A
Starter expected inrush 260.00 A Motor locked rotor amps 1536.00 A
Run load amps 232.40 A
This unit complies with the efficiency requirements of ASHRAE Standard 90.1-1999
Certified in accordance with the AHRI Water-Cooled Water-Chilling Packages using the
Vapor Compression Cycle Certification Program which is based on AHRI Standard 550/590
(I-P). Certified units may be found in the AHRI directory at www.ahridirectory.org.