Professional Documents
Culture Documents
Analysis & Design of RCC Shear Walls in The Model Using ETABS - Skill-Lync
Analysis & Design of RCC Shear Walls in The Model Using ETABS - Skill-Lync
Analysis & Design of RCC Shear Walls in The Model Using ETABS - Skill-Lync
Analysis & Design of RCC shear walls in the model using ETABS
Akanksh M
updated on Apr 16, 2021, 08:51pm IST
ETABS
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 1/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 2/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
7.Selecting the Pier edge/ boundary zones widths design output.
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 3/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 4/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 5/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 6/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 7/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
LEAVE A COMMENT
Thanks for choosing to leave a comment. Please keep in mind that all comments are moderated according to our comment
policy, and your email address will NOT be published. Let's have a personal and meaningful conversation.
No comments found
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 8/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
Project 1
Akanksh M
updated on Jun 25, 2021, 03:08pm IST
Aim: To analyse the above components with and without load patterning
Read more
Aim:To model, analyse and design the Architectural G+3 RCC building located in Guwahati Assam and
producing the result of Etabs model for the two blocks on either side of the expansion gap Foundation details
illustrating the pile & pile cap reinforcement Tie beam details connecting the pile caps Column reinforcement
Framing… Read more
Aim: To Design the Square footing for a column size of 400X400 mm with the load of 2000kN and the soil
having the SBC of 150kN/m2.
Result:
Providing 16 numbers of 20mm diameter bar at a 250mm c/c Read
more
Aim: To Run a modal response spectrum analysis and check analysis results of the etabs model for inter-
storey drift requirements, vertical & planar irregularities, minimum shear wall requirements,maximum axial
load ratio for column and shear walls, effective moment of inertia for beams and columns as per the IS…
Read more
ETABS
Aim: To Provide longitudinal reinforcement for column using ETABS Procedure: 1. Download the given 5
storey building 2.Clicking the concrete frame design tool 3. Choosing to display the longitudinal
reinforcement 4. Choosing to display the Shear reinforcement 5. GRID A a. Ast Max= 7027 (From base to 1st
floor) … Read more
ETABS
Aim: To provide reinforcement details for beams using ETABS Procedure: 1.Downloading the given model
and opening in ETABS 2.Clicking the concrete frame design 3. Selecting the design combination 4.Clicking
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 9/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
the concrete frame option 5.Run the Analysis 6.Checking the values of percentage steel 7. At Grid 3 At…
Read more
ETABS
Comparision 1 Aim: To compare the effect of stiffness on natural period of buildings E & F and G & H using
ETABS Building E: 1. Opening New model 2. Setting the Building E & F storey as 10 and number of bays in X
direction as 4 and in Y direction as 3 3. Defining the section property of column as 400X400mm… Read
more
ETABS
Aim: To model 25 storey building on ETABS with structural properties including ground floor at a height of 1.5
metre from the base and each floor at 3 metres Steps: Opening ETABS apps and selecting new model. In
modelling Initializing built in setup is selected Selecting the grid and storey values as per… Read more
1 Answer Aim:To Comment on the structures given above with respect to the static eccentricity, the system’s
redundancy, foundation systems, architectural constraints As the structure is more restrained it will be more
shrinking, expanding and cracking There will be more floor shrinkage and expanding in… Read more
1 Answer Aim: Commenting on the layout of the structure looking into aspects of symmetry, redundancy and
bi-directional stiffness and ductility. The layout is symmetric, Since the structure is symmetric the redundancy
is increased and more reliable in the areas where there is more earthquake and also since it is symmetric…
Read more
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 10/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
Akanksh M
updated on Feb 20, 2021, 04:23pm IST
1 Answer
Aim: Computing the lateral stiffness of the one storey frame
2 Answer
Aim: To calculate natural
frequencies and degree of freedom
3 Answer
Aim:To calculate natural frequency
4 Answer
Aim: To calculate
effective stiffness
Read more
Identification of Cracks
Akanksh M
updated on Feb 10, 2021, 02:13pm IST
1 Answer Aim: To identify the type of failure from the above figures. a) Failure due to the improper nominal
cover to the beam, Buckling of reinforcement provided in the bottom of the beam and crushing of concrete
at the beam- column junction. This type of failure happens if the nominal cover for the beam is
inappropriate… Read more
Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork
Akanksh M
updated on Feb 03, 2021, 10:45pm IST
1 Answer Aim: Using the Architecture/ Structure Project file developed and exporting the Revit architecture
and structure model to Navisworks Cache file following the export settings Commands used: Export File 3D
view Procedure: 1. Opening the Architectural models of previous weeks and viewing in 3D view 2. Clicking…
Read more
Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium
using Dynamo
Akanksh M
updated on Jan 30, 2021, 07:20pm IST
1 Answer Aim: Using Dynamo creating a set of sinusoidal points and creating a curve and creating a surface
out of the curve. Commands Used: Manage Dynamo Procedure: 1. Opening Revit and in manage tab
selecting the Dynamo tool and writing the programme to create Parameters used in Dynamo: Integer slider…
Read more
1 Answer Aim: To use the shortcut keys to for various commands in revit a. Using 3D model create a section
box BX b. To create similar doors and windows in a floor plan layout CS c. To reduce the thickness of
lines visible in plan views TL d.… Read more
HVAC
1 Answer Aim: To Know what is HVAC system and to Know why are they essential in modelling the building
HVAC system are the openings which enables the circulation of air, Sunlight etc The Abbrevation of HVAC is
Heating, Ventilation and Air-Condition HVAC are essential in modelling the Building because they help to
maintain… Read more
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 11/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
1 Answer I have selected a school Building. 2 Answer Aim: To select Geographical location of the school
Building. The geographical Location of the School Building is in Banglore, Karnataka Tools Used: Manage
Location Selecting the Location of the School Building on Banglore Assumptions : 1. The height of the…
Read more
Question 1 Aim: To open Architectural file and setting project base points and project shared co-ordinates
using manage tab Tools used: Collaborate Co-ordinate in manage tab Grid Specify co-ordinates at point in
collaborate Procedure: 1. Opening the new Architectural file and saving it as Construction
Building_architectural … Read more
P 1- Co-ordinate systems. Command used:Line 1. Absolute co-ordinate system 1st point- (2,1) 2nd point-
(8,1) 3rd point- (8,2) 4th point- (3,2) 5th point- (3,6) 6th point- (8,6) 7th point- (8,7) 8th point-
(2,7)… Read more
Challenge 7 PLAN: AIM: To draft the floor plan of the house and dimensioning it using AutoCAD
PROCEDURE: Open AutoCad Selecting metric system Command UN(units) and selecting decimals with
precision of 0 Command LIMITS and having limit of (0,0) in lower left corner and (10000,10000) in upper
right corner Command… Read more
CABINET Aim: To draft the Cabinet using AutoCAD Commands used: LINE OFFSET TRIM ERASE MLEADER
DIMLINEAR TEXT CIRCLE ERASE Procedure Open AutoCad Selecting metric system Command UN(units)
and selecting decimals with precision of 0 Command LIMITS and having limit of (0,0) in lower left corner
and (10000,10000)… Read more
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 12/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
Drawing 1 Opening new file and setting decimal and precision to 0.00 Command line: From random point
drawing 3.00 m line and @2.12<45, @2.83<135 then 2.00m line and close. Command offset:Offsetting
3.00m line to 1.00m and 2.50m. Command circle:From midpoint of 3.00m line at 2.50m and 1.00m
drawing a circle of diameter… Read more
C1 Line command initial points at (10,0) then by polar co-ordinate system 2nd point: @0.25<90 3rd point:
@0.2<0 4th point: @0.4<90 5th point: @0.05<0 6th point: @0.4<90 7th point: @0.05<0 8th point:
@1.65<90 9th point: @0.3<0 10th point: @1.65<270 11th point: @0.05<0 12th point: @0.4<270… Read more
AutoCAD_Creation of Layout_Week 10
Akanksh M
updated on Nov 27, 2020, 09:42pm IST
Challenge 1: AIM: To draft the floor plan of the house and creating viewports and plot using AutoCAD
PROCEDURE: Open AutoCad Selecting metric system Command UN(units) and selecting decimals with
precision of 0 Command LIMITS and having limit of (0,0) in lower left corner and (10000,10000) in upper
right corner… Read more
Challenge 1 KITCHEN PLAN Aim: To draft the floor plan of the Kitchen and hatching it using AutoCAD
Procedure: Open AutoCad Selecting metric system Command UN(units) and selecting decimals with
precision of 0 Command LIMITS and having limit of (0,0) in lower left corner and (10000,10000) in upper
right corner… Read more
AutoCAD_Reinforcement Bar Shapes, Types of Doors, Creating symbols legend and Creating
standard template_Week 8
Akanksh M
updated on Nov 27, 2020, 09:37pm IST
Challenge 1a Aim: To draft the Template and creating it as a block using AutoCAD Procedure: Open AutoCad
Selecting Imperial system Command UN(units) and selecting Engineering with precision of 0’-0.0”
Command LIMITS and having limit of (0’,0’) in lower left corner and (100’,100’)… Read more
Aim: To Plan the G+1 residential floor plan and calculate the Loads acting on the Building. General
Information:The Plot size for the Construction of G+1 floor residential plan has 30'x50' where the Total plot
Area has 1500 sq feet The plan for the G+1 Duplex residential house has a setback distance of 2' and 2' on
East… Read more
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 13/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
Aim: To draft the floor plan of the house in a 60’x20’ East facing and draft its Elevation, Section and layout of
Column , Beam and Footing using AutoCAD General Information:The Plot size for the Construction of G+1
floor residential plan has 60'x20' where the plot is East facing and has Total Area of… Read more
Challenge 1 Aim: To Schedule the Column Commands Used: LINE OFFSET DDPTYPE DIVIDE CIRCLE TRIM
FILLET LWEIGHT SCALE TEXT Procedure: Open AutoCad Open AutoCad Select new and Imperial system
Select Engineering with precision 0'-0.0" Type Command Limits and enter lower left corner as 0'-0.0" and
upper right corner as 50'-0.0"… Read more
AutoCAD_Residence Floor Plan, Seating Plan, Toilet and Utility room Plan_Week 4
Akanksh M
updated on Nov 27, 2020, 08:53pm IST
Challenge 1 Aim: To Sketch a house plan Command used: UN LIMITS Z XLINE OFFSET TRIM CIRCLE ERASE
Procedure: open the Autocad Go to Autocad option press new and select imperial Type UN in the command
prompt and select Engineering and precision 0'-0.0" Type LIMITS in the command prompt and specify the
lower left corner point… Read more
AutoCAD_Isometric View of a Room, Facade of a building, Staircase and Wall with footing in
AutoCAD 3D_Week 12
Akanksh M
updated on Nov 27, 2020, 08:49pm IST
Challenge 1 Aim: To draw the Plan and creating it as a 3D Elevation using AutoCAD Procedure: Open AutoCad
Selecting Imperial system Command UN(units) and selecting Engineering with precision of 0’-0.0”
Command LIMITS and having limit of (0’,0’) in lower left corner and (100’,100’)… Read more
3 Dimensional Model of the Residential Building Aim: To create a 3Dimensional model of the Residential
Building and create a Render View General Information: To Create a 3Dimensional model of the Residential
Building i have drawn a random plan of size 10000X8000 Sq mm which have a required rooms the plan
and Elevation… Read more
Mix design for M35 grade of concrete with flyash Essential data: Grade :M35 Type of
cement … Read more
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 14/15
7/4/2021 Analysis & Design of RCC shear walls in the model using ETABS : Skill-Lync
AutoCAD_Creating 3d Models_Week 11
Akanksh M
updated on Nov 19, 2020, 01:24am IST
Challenge 1 Aim: To create the 3D model using AutoCAD Procedure: Open AutoCad Selecting Imperial
system Command UN(units) and selecting Engineering with precision of 0’-0.0” Command LIMITS and
having limit of (0’,0’) in lower left corner and (100’,100’) in upper right corner… Read more
RELATED COURSES
Engineers CFD Engineer Master's Certification Terms 129B, 2nd & 3rd Floor, Valmiki Nagar,
East Coast Road, Thiruvanmiyur,
Introduction to Structural Analysis using Program Privacy Policy
Chennai - 600041.
ANSYS Workbench Design Engineer Master's Certification +91 8939850851
Plastic Design for Automotive Program info@skill-lync.com
Application (Interior/Exterior Trims) Master's Certification Program in Electric
using CATIA Vehicle Design & Analysis
Design Engineer Master's Certification
Program
Our Blogs
Simulation - A Handy Tool for Product Development
How to Calculate Fatigue Life in Product Development
The Basic Elements of AutoCAD 4 (Part 2): The Importance of
Units
The Basic Elements of AutoCAD 3 (Part 2): Dimension Styles and Other Tools A Deep-Dive Into Fatigue Life Estimation for Product Development
The Basics of Mold
Design 4 (Part 3): Discussing Drafts, Shrinkage, and Inserts
High-Potential Careers in the Fuel Cell Industry
Factors and Failures That Affect Simulation in Product
Development
How to Become a Design Engineer and Bag Employment Offers
The Basic Elements of AutoCAD 2 (Part 2): How to Draw Circles and Arcs
The Basics of
Mold Design 3 (Part 2): A Further Look at the DFM Checklist
The Basic Elements of AutoCAD 1 (Part 2): Exploring Additional Toolbar Features
The Basics of Mold Design 2
(Part 3): Summing up With Drafts and Parting Lines
Product Design: Core Concepts
The Basic Elements of AutoCAD 2 (Part 1): Basic Geometry
The Basic Elements of
AutoCAD 3 (Part 1): Text and Dimension Styles
Everything You Need to Know About ETABS
The Basics of Mold Design 3 (Part 1): An Overview of Tonnage and DFM
The
Basics of Mold Design 2 (Part 1): A Closer Look at Development and Manufacturing
The Basics of Mold Design (Part 1): Understanding Injection Molding
The Core Concepts of
State-Space Control - Part 2
The Basic Elements of AutoCAD 1 (Part 1): A Rundown of Toolbar Features
The Basics of Mold Design 4 (Part 1): A Look at Parting Surface and Its
Types
The Core Concepts of State-Space Control - Part 1
The Fundamentals of Additive Manufacturing
https://skill-lync.com/student-projects/analysis-design-of-rcc-shear-walls-in-the-model-using-etabs-3 15/15