Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 4

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

US$ US$
LAUNDRY EQUIPMENT INSTALLATION.
NOTE:- This pworks should be executed by a
Laundry equipment specialist to be approved by the
Engineer
Supply and install the following laundry equipment

A LAUNDRY DRIER
Laundry dryer as PRIMUS D14; Maximum Capacity
30Kg dry weight motor; Free standing.

Stainless steel drum; all parts which come into


contact with the linen are made out of stainless steel.
Adjustable drying time and cooldown; control panel
to have two separate timers, one for drying and
another for cool down. Cool down features avoids
rumpling of linen.
Adjustable Temperature; temperature to be easily
controlled according to the linen.
Push-To-Start Button
Durable and attarctive cabinet
Modular electrical system, all operating controls to
be on a modular control panel
Self Cleaning mechanism
Size (H x B x D)1835 x 711x 1155mm
1/3 h.p. input power 3 phase OR Equal and
approved 2 NO

B LAUNDRY WASHER EXTRACTOR


Laundry washer extractor as PRIMUS X35 PRO,
maximum capacity 35kg dry weight, rigidly fixed on
plinth.
5 compartment soap dispenser with 5 hook up
positions for liquid soap injection.
Large door opening 1800 which enables easy loading
and unloading
Spray rinsing taking advantage of centrifugal force
created during extraction
The drum and tub are made of premium quality
stainless steel
Rugged but simple two motor drive offers four
speeds and an efficient final extraction.
Internal and external motor protection
Two large drain valves offers fast drainage
25mm diameter water inlet valves provides short
cycle times.
Electric Heating
Electrical power supply: 24kW,
450V,3PHASE,50HZ. 2 NO

Total carried to Collection Page

B/1 November 2008


ITEM DESCRIPTION QTY UNIT RATE AMOUNT
US$ US$

C IRONER
Laundry dryer as PRIMUS P25 - 140.
Roller diameter 250mm
Roller lenght 1400mm
Automatic finger guard
Emergency Stop
Foot pedal extend over the entire roller length
Automatic lifting and lowering of the heating bed
2 ironing speeds
Unlimited variable temperature
High ironing pressure
Built in laundry box
Body in galvanised steel
In case of power failure the bed can be manually
lifted.
Electrical input power 415v, 3 phase 50Hz. OR
Equal and approved 2 NO

D DHOBI SINK

Terrazzo sink size 600 x 450 x 350mm deep


supplied with 40mm diameter grid waste and chain
plug, fixed on a concrete worktop. 20mm diameter
sink tap as BRICON No. 611-20 bib cock heavy
pattern star head, No.360 40mm diameter x 40mm
diameter bottle trap CP with 75mm seal, inlet
screwed female, oultlet male, extension piece and
any other item necessary for the installation. Or
equal and approved. 6 No

B/2 November 2008


Total carried to Collection Page

B/3 November 2008


ITEM DESCRIPTION US$

COLLECTION PAGE

D Total B/F from page D/11

E Total B/F from page D/15

F Contingency sum
Allow US$. 6,000.00 to be spent in part or
whole at the sole discretion of the Engineer.

Total Carried Forward to Summary page

B/4 November 2008

You might also like