Professional Documents
Culture Documents
Schedule of Rates For Watermain Construction in Sarawak 2020
Schedule of Rates For Watermain Construction in Sarawak 2020
Schedule of Rates For Watermain Construction in Sarawak 2020
FO R
WATERM AIN CO NSTRUCTI ON
I N SARA WAK 202 0
JKR Sarawak
December 2020
Notes to tenderers:
1. This is only a cover page for this document. Please obtain the full set from
the JKR Sarawak webpage.
2. The “Location Factor From Base at Kuching City” for this tender is _____ %
and is the percentage over all the items and rates as listed in this Schedule
of Rates to be used for the purposes as stated in the tender documents.
District 20%
District 15%
Dalat 20%
Bintulu Tatau 20%
Oya 20%
Sebauh 23%
Igan 18%
Balingian 23% City 15%
Kuala Balingian 23% Subis 20%
Mukah
Semop 30% Bekenu 15%
Miri
Matu 25% Marudi 25%
Betanak 30% Long Lama 40%
Daro 25% Beluru 22%
Bruit 30%
Tanjung Manis 18% District 30%
Limbang
Lawas 28%
District 30%
Song 25%
Belaga 70%
Kapit
Sungai Asap 25%
Bukit Mabong 40%
R U L E S O F D E T E R M I N I N G T H E L O C AT I O N F AC T O R
1. The percentage (%) factors as stated are for those projects accessible by motorized vehicles
within fifteen kilometres (15 km) radius from the location shown.
2. Where the project site is beyond fifteen kilometres (15 km) radius of the above stated
locations, these additional percentage (%) factors shall be added on to those percentages
stated above:
4. Where the project sites can only be accessible by air, the location factor shall be doubled
over the value obtained from that by motorized vehicles.
5. Where the project sites can only be accessible by foot, the location factor shall be fifty
percent (50%) over the value obtained from that by motorized vehicles.
6. Where in determining the locations factor and two or more factors and radial distances are
equally applicable, the lower in each case shall be used.
7. Where in determining the location factor and two or more factors and radial distances by the
rules above whereby there can be a combination due to accessibility, say partly land and
partly waterway or partly waterway and partly by foot, there shall be a combination of the
rules according to the radial distance from the nearest locations stated above.
8. Where in determining the location factor and the site for the project lies within two radial
distances, the additional percentage (%) for the radial distance within which more than fifty
percent (50%) of the Site lies shall be used.
P R E AM B L E S
1. All rates shall be used and read together with the “Location Factor From Base at Kuching
City”.
2. All rates herein have reasonably taken into account anticipated and calculated inflation and
risk factors for the next two (2) years from the date of publication.
3. All descriptions are to be read with reference to the General Specification for Watermain
Construction (Latest Version) and the following :
All rates herein shall be held to include for supply and delivery to site, wastage on
materials, carriage and cartage, carrying in and return of empties, hoisting, setting,
fitting and fixing in position, making good and all other labours and everything else
necessary (including any custom duties, etc.) for the proper completion of each item
and for establishment charges and profit.
(a) Clearing all general vegetation, tall grass, grassland, creepers, shrubs, bushes
and all undergrowth.
(b) Felling of trees of all sizes including cutting, grubbing up their stumps and roots
and dispose off site.
(c) Clearing all rubbish, debris and unwanted materials.
(d) Breaking up and removing disused structures, surface beds and pavings,
sewers, drains and drain pipes, manholes, underground wells, sumps, fencing,
posts, retaining walls and other such like structures, including disconnecting and
sealing off services, plugging any pipes cut off at perimeter of site.
(e) Removing existing tree stumps and grubbing up their roots and disposal off site.
(f) Filling holes and voids caused by removal of trees, tree stumps, roots, existing
structures or obstructions with hardcore or suitable approved materials.
Rates for Horizontal Directional Drilling should also include for the provision of all
necessary mechanical plant, mobilization and demobilization.
“Sawn formwork” shall mean formwork to produce concrete surfaces suitable for
plastering or tiling. “Wrot formwork” shall means formwork to produce fair face concrete
surfaces suitable for direct application of decorations. Formwork shall be deducted for
openings over one square metres.
(D) Rates for each item of paving shall be held to include for all rounded angles, arrises
and making good and any other sundry items of alike nature.
(E) Rates for each item of skirtings, risers, channels and the like shall be held to include for
all short lengths formed, cut and purpose made angles, junctions, ends, etc. and
making good and any other sundry items of alike nature.
(F) Rates for mild steel tubing are to include for short running lengths, sockets, backnuts,
elbows and bends.
(G) For avoidance of doubt, the rates for all pipe materials and fittings shall be held to
include supply, delivery to that Site and installation, including all necessary incidental
costs thereto.
Item
No. Description Unit Rate (RM)
Item
No. Description Unit Rate (RM)
Item
Description Unit Rate (RM)
No.
Item
Description Unit Rate (RM)
No.
Item
Description Unit Rate (RM)
No.
'
Double flange ductile iron concentric taper (cont d)
Item
Description Unit Rate (RM)
No.
' '
Double socket ( T Type) ductile iron tee with branch flanges PN16 to
'
BS4504 Table 16/11 c/w rubber gasket (cont d)
Item
Description Unit Rate (RM)
No.
' '
Double socket ( T Type) ductile iron tee with branch flanges PN16 to
'
BS4504 Table 16/11 c/w rubber gasket (cont d)
Item
Description Unit Rate (RM)
No.
‘ ’ '
All socket ( T Type) ductile iron tee (cont d)
All flanged Ductile Iron tee PN16 to BS4504 (Table 16/11) (cont’d)
All flanged ductile iron tee PN16 to BS4504 (Table 16/11) (cont’d)
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel plain end tee and with metallic zinc
coating and bitumen wrapping complying to BS534 : 1990
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel plain end tee and with metallic zinc
coating and bitumen wrapping complying to BS534 : 1990 (Cont’d)
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel plain end tee and with metallic zinc
coating and bitumen wrapping complying to BS534 : 1990 (Cont’d)
Concrete-lined mild steel tee with flanged branch and with metallic
zinc coating and bitumen wrapping complying to BS534
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel tee with flanged branch and with metallic
zinc coating and bitumen wrapping complying to BS534 (Cont’d)
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel tee with flanged branch and with metallic
zinc coating and bitumen wrapping complying to BS534 (cont’d)
Item
No. Description Unit Rate (RM)
Concrete-lined mild steel tee with flanged branch and with metallic
zinc coating and bitumen wrapping complying to BS534 (cont’d)
Item
No. Description Unit Rate (RM)
Item
Description Unit Rate (RM)
No.
44 90 mm Diameter NO 177.00
Item
Description Unit Rate (RM)
No.
44 90 mm Diameter NO 177.00
Handle, joint and lay in trench, for the following Pipe including
fittings, valves, special, hydrants etc.
3 225 mm OD M 15.00
4 280mm OD M 18.00
5 355 mm OD M 20.00
6 450 mm OD M 30.00
7 100 mm ND M 13.00
8 150 mm ND M 15.00
9 200 mm ND M 16.00
10 250 mm ND M 18.00
11 300 mm ND M 24.00
12 350 mm ND M 35.00
13 400 mm ND M 40.00
14 450 mm ND M 50.00
15 500 mm ND M 55.00
16 450mm ND M 40.00
17 500mm ND M 45.00
18 550mm ND M 50.00
19 600mm ND M 54.00
20 650mm ND M 59.00
Item
Description Unit Rate (RM)
No.
21 700 mm ND M 63.00
22 750 mm ND M 68.00
23 800 mm ND M 72.00
24 850 mm ND M 77.00
1 JBALB Sarawak Standard Precast Block 750mm x 850mm Detail A for Sluice Valve NO 86.80
- 200 & 225mm
2 JBALB Sarawak Standard Precast Block 650mm x 750mm Detail B for Sluice Valve NO 80.60
- 200 & 225mm
3 JBALB Sarawak Standard Precast Block 850mm x 900mm Detail C for Sluice Valve NO 99.10
- 200 & 225mm
4 JBALB Sarawak Standard Precast Block 550mm x 700mm Detail D for Sluice Valve NO 74.50
- up to 175mm
5 JBALB Sarawak Standard Precast Block 550mm x 700mm Detail E for Sluice Valve NO 74.50
- up to 175mm
6 JBALB Sarawak Standard Precast Block 700mm x 850mm Detail F for Sluice Valve NO 86.80
- up to 175mm
7 JBALB Sarawak Standard Precast Block 850mm x 550mm Detail G for Sluice Valve NO 80.60
Hydrant
8 JBALB Sarawak Standard Precast Block 1000mm x 700mm Detail H for Sluice NO 92.90
Valve Hydrant
9 JBALB Sarawak Standard Precast Block 750mm x 600mm Detail K for Screwdown NO 80.60
Hydrant
10 JBALB Sarawak Standard Precast Block 850mm x 700mm Detail L for Screwdown NO 86.80
Hydrant
11 JBALB Sarawak Standard Precast Block 900mm x 600mm Detail M for Double Air NO 86.80
Valve
12 JBALB Sarawak Standard Precast Block 1000mm x 700mm Detail N for Double Air NO 99.10
Valve
13 JBALB Sarawak Standard Precast Block 500mm x 600mm Detail P for Single Air NO 68.20
Valve
14 JBALB Sarawak Standard Precast Block 700mm x 700mm Detail Q for Single Air NO 80.60
Valve
16 Pressure and Leakage testing. Rate to include provision of all water required for M 4.00
testing
17 Flushing and sterilising. Rate to include chemicals and provision of water M 6.00