Professional Documents
Culture Documents
Deployment Guidelines Regarding Techroutes 2708F-UP L2 Switch For Small Cells
Deployment Guidelines Regarding Techroutes 2708F-UP L2 Switch For Small Cells
Document No.
This document and any data or information generated from its use, are classified, as a minimum, Reliance Internal. Distribution is
intended for Reliance authorized recipients only. The information contained in this document is subject to the terms and conditions of
the agreement or contract under which this document was supplied to the recipient's organization. None of the information contained
in this document shall be disclosed outside the recipient's own organization, unless the terms of such agreement or contract expressly
allow, or unless disclosure is required by law.
Page 1 of 19
INDEX
1. Network interface(GigaEthernet):-
LNK/A - Press ZTP button the ZTP LED will glow green
ZTP Green
CT for 3 seconds
- SD card slot
SD card slot - -
6 Deployment Scenarios:-
Mounting Bracket
1
(1 Set)
2 Screw (4 Nos.)
Console cable
3 (Navy Blue)
(1 No.)
DC Connector
4
(1 No)
5 Grounding Cable
1. Install Mounting brackets on both sides of device with proper screws which are provided.
9 Grounding Guidelines:-
L2 Switch can be powered by both AC and DC power supply at a time one will work.
Insert AC or DC Power Card on the Device – Single slot are compatible for both AC and DC
cards.
8. Set the Serial Parameter such as Port,Baud Rate (9600) and Click on Connect
9. Press Enter and enter the Username and password as admin to login into Device
13 Escalation Matrix:-
Technical Team