Professional Documents
Culture Documents
kx80 Página 174
kx80 Página 174
'Remove the band and flap mounting bolts, and 'Place a stand or block under the motorcycle so
take off the flap. that the rear wheei is raised off the ground.
•lnstall the uni-trak link upper end and finger- 'Remove the mounting bolts and nuts, and take the
tighten the nut. rear shock absorber out to the left.
•Using the hook wrench (special tool) turn the ad-
justing sleeve to adjust the spring preload.
A. Adjusting Sleeve.
B.
Wrench: 5m1-11ü)
'Remove the uni-trak upper mounting boit. and nut
"nstall the flap with mto mounting bolts and band.
•Mount the uni-trak upper end on the uni-trak arm
with mounting bolt and nut, and tighten the mount-
.•:••-.<-.•.•s•çp.'....