Professional Documents
Culture Documents
Centricast Piping System 1 14 Inch Fittings and Accessories Catalog
Centricast Piping System 1 14 Inch Fittings and Accessories Catalog
Order by figure (Fig.) number prefixed with CL for vinyl ester, RB for epoxy and ZC for Z-Core followed by
construction type (if applicable), diameter, and outlet sizes.
Index
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adhesives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Maintenance Repair Kits . . . . . . . . . . . . . . . . . . . . . .19
Assembled Fitting Dimensions . . . . . . . . . . . . . . . 14 Pipe Support/Wear Pad . . . . . . . . . . . . . . . . . . . . . . .12
Centriclamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Pressure Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Elbows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Special Configuration . . . . . . . . . . . . . . . . . . . . . . , .17
End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Take Off Dimensions . . . . . . . . . . . . . . . . . . . . . . . . .17
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Floor Drains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Threaded Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How to Read Flanged or Reducer Fittings . . . . . . .17 Threaded Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
www.fgspipe.com • fgspipe@nov.com
PRESSURE RATINGS
Note: Quotations for specially fabricated higher pressure fittings are available on request.
2
COUPLINGS
Band Clamp A
A
C
Fig. 14 Fig. 30
Socket RSR Repair
Inner Coupling
B Coupling
B
Outer Coupling
Split (4 PLCS)
B
Size A ± 1⁄8 PM Ref HLU Ref C Ref Wt. † Size A ± ⁄8 1
B Ref Wt. †
(In) (In.) (In.) (In.) (In.) (Lb.) (In) (In.) (In.) (Lb.)
1 3 2 1⁄8 -- ⁄8
5
0.5 1 2 5⁄8 2 3⁄8 1.0
1 1⁄2 3 2 3⁄4 -- ⁄8
3
0.5 1 ⁄2 1
3 ⁄4
1
3 1.0
2 4 3 1⁄16 -- ⁄8
3
0.7 2 4 3 ⁄16
7
1.4
3 4 4 ⁄163
-- ⁄8
3
1.0 3 4 4 ⁄16
9
2.0
4 4 5 ⁄41
-- ⁄8
3
1.5 4 4 5 9⁄16 3.0
6 4 8 -- ⁄8
3
3.2 6 4 ⁄4
3
7 ⁄16
11
6.5
8 5 ⁄8
5
9 ⁄87
-- ⁄8
3
4.4 8 5 ⁄4
1
9 8.8
10 8 ⁄8
3
-- 11 ⁄8 3
⁄8
3
13.2 10 5 ⁄4
3
11 ⁄8 1
26
12 8 3⁄8 -- 13 1⁄2 ⁄8
3
14.0 12 6 1⁄4 13 1⁄8 28
14* 8 ⁄8
3
15 ⁄16
9
- ⁄8
3
17.2 14 6 ⁄4
1
15 ⁄8 1
34
NIPPLES
A A
Fig. 6S Fig. 3S*
Iron Pipe Iron Pipe
Male Thread B B
THREADED ADAPTERS
A
A C
Fig. 2 Fig. 29S*
Iron Pipe Thread Iron Pipe Thread x
Socket
B B
Size A ± 3⁄16 B + 0 -1/16 Wt. † Size A+1⁄8 -1⁄16 B ± 1⁄8 C ±1⁄16 Wt. †
(In) (In.) (In.) (Lb.) (In) (In.) (In.) (In.) (Lb.)
1* 3 2 11⁄16 0.7 2 3 1⁄16 3 1 ⁄2 1 1⁄2 1.0
1 ⁄2*
1
4 3 ⁄8
1
0.7 3 4 4 1⁄2 1 13⁄16 1.4
2 3 1⁄16 3 1⁄2 1.0 4 4 1⁄2 5 3⁄4 1 13⁄16 2.8
3 4 4 ⁄2
1
1.5 6 4 ⁄4
1
7 ⁄4
1
1 ⁄16
13
1.6
4 4 ⁄2
1
5 ⁄4
3
2.9
A CD
Size A Ref B ± 1⁄16 C Ref Wt. † Size A ± 3⁄8 B ± 1⁄16 C Ref D Ref E Ref Wt. †
(In) (In.) (In.) (In.) (Lb.) (In) (In.) (In.) (In.) (In.) (In) (Lb.)
1 x blank* 1 5⁄16 1 1⁄4 -- 0.1 1 3 1⁄16 1 3⁄16 1 5⁄16 2 1⁄16 1 1⁄4 0.7
1 ⁄2 x blank*
1
1 ⁄16
15
1 ⁄2 1
-- 0.2 1 ⁄21
3 ⁄16
3
1 ⁄16
5
1 ⁄16
15
2 ⁄16
11
1 ⁄2
1
0.9
2 x blank* 2 ⁄8
3
1 ⁄2 1
-- 0.4 2 4 1 ⁄16
13
2 ⁄8
3
3 ⁄81
1 ⁄2
1
1.2
3 x blank* 3 1⁄2 2 -- 1.2 3 4 1 13⁄16 3 1⁄2 4 3⁄16 1 1⁄2 2.2
2 x 1⁄4 2 3⁄8 1 1⁄2 1
⁄4 I.P. 0.4 4 4 1 13⁄16 4 1⁄2 5 1⁄4 1 1⁄2 3.7
2 x ⁄21
2 ⁄83
1 ⁄2 1 1
⁄2 I.P. 0.4 6 4 1 ⁄16
13
6 ⁄8
5
7 ⁄87
1 ⁄2
1
7.4
2 x ⁄43
2 ⁄8
3
1 ⁄2 1 3
⁄4 I.P. 0.3 8 5 ⁄8
5
2 ⁄8
5
8 ⁄8
5
9 ⁄87
2 ⁄8
5
12.4
2x1 2 ⁄83
1 ⁄2 1
1 I.P. 0.3 10* 8 ⁄8
3
4 10 ⁄4 3
12 ⁄4 1
2 15
2 x 1 ⁄4
1
2 ⁄83
1 ⁄2 1
1 ⁄4 I.P.
1
0.3 12* 8 ⁄8
3
4 12 ⁄4 3
14 ⁄163
2 --
2 x 11⁄2 2 3⁄8 1 1⁄2 1 1⁄2 I.P. 0.2
3x1 3 1⁄2 2 1 I.P. 1.0
3 x 11⁄2 3 1⁄2 2 1 1⁄2 I.P. 0.8
SADDLE
B
Fig. 13
Pipe Saddle
1/2 PIPE O.D.
CL PIPE O.D.
A
Note: For Threaded Outlets or Cement Socket Outlets greater than one size reduction, see
Assembled Fittings section.
Figure 13 weights based on blank saddle. Saddles available in CL and RB only.
4
REDUCERS
Reducer inserts which reduce greater than two pipe sizes are available
Fig. 33 on order only. Reducer inserts 8” and larger which reduce greater than
Insert Socket D CA
one pipe size may have a reduced pressure rating. Consult factory for
3/16 +
_ 1/16 specific recommendations.
3/16 + 1/16
B
Size A ±1⁄16 B ± 1⁄8 C Ref D Ref Wt. † Size A ± 1⁄16 B ± 1⁄8 C Ref D Ref Wt. †
(In) (In.) (In.) (In.) (In.) (Lb.) (In) (In.) (In.) (In.) (In.) (Lb.)
1 1⁄2 x 1 1 15⁄16 1 1⁄2 1 5⁄16 1 0.2 8x4 8 5⁄8 2 1⁄2 4 1⁄2 4 6.3
2x1 2 ⁄8
3
1 ⁄2 1
1 ⁄16
5
1 0.3 8x6 8 5⁄8 2 1⁄2 6 5⁄8 6 1⁄8 3.5
2 x 1 1⁄2 2 3⁄8 1 1⁄2 1 7⁄8 1 1⁄2 0.2 10 x 2 10 3⁄4 4 3⁄16 2 3⁄8 2 20.9
3x1 3 ⁄2
1
2 1 ⁄16
5
1 0.9 10 x 3 10 ⁄4
3
4 ⁄16
3
3 ⁄2
1
3 19.9
3 x 1 ⁄2
1
3 ⁄2
1
2 1 ⁄8
7
1 ⁄2
1
0.9 10 x 4 10 ⁄4
3
4 ⁄16
3
4 ⁄2
1
4 17.9
3x2 3 1⁄2 2 2 3⁄8 2 0.6 10 x 6 10 3⁄4 4 3⁄16 6 5⁄8 6 1⁄8 13.8
4x2 4 1⁄2 2 2 3⁄8 2 1.3 10 x 8 10 3⁄4 4 3⁄16 8 5⁄8 8 1⁄8 7.8
4x3 4 ⁄2
1
2 3 ⁄2
1
3 0.7 12 x 2 12 ⁄4
3
4 ⁄16
3
2 ⁄8
3
2 34.9
6x2 6 ⁄8
5
2 2 ⁄8
3
2 3.5 12 x 3 12 ⁄4
3
4 ⁄16
3
3 ⁄2
1
3 33.1
6x3 6 5⁄8 2 3 1⁄2 3 2.9 12 x 4 12 3⁄4 4 3⁄16 4 1⁄2 4 29.8
6x4 6 ⁄8
5
2 4 ⁄2
1
4 2.2 12 x 6 12 ⁄4
3
4 ⁄16
3
6 ⁄8
5
6 ⁄8 1
22.9
8x2 8 ⁄8
5
2 ⁄2 1
2 ⁄8
3 2 7.4 12 x 8 12 ⁄4
3
4 ⁄16
3
8 ⁄8
5
8 ⁄8 1
16.9
8x3 8 5⁄8 2 1⁄2 3 1⁄2 3 7.1 12 x 10 12 3⁄4 4 3⁄16 10 3⁄4 10 1⁄4 12.1
A A
Fig. 34F(1)
B C
B
Fig. 34C
Concentric Tapered Concentric Tapered
Socket, Socket
C D
Hand Layup
Construction
5
A
B
Fig. 35C F
A
G Fig. 35F (1) C
FLANGES
Fig. 18 and Fig. 18L* Flange Socket
F
E
D Fig. 18R * Reducer Socket
1 4 1⁄4 3 1⁄8 5
⁄8 ⁄8
7
1 7⁄16 -- 0.6 4-1⁄2 6x3 11 9 1⁄2 ⁄8
7
1 9⁄16 2 1⁄16 8.0 8-3⁄4
1 1⁄2 5 3 7⁄8 5
⁄8 1 3⁄16 1 9⁄16 -- 1.1 4-1⁄2 6x4 11 9 ⁄2
1
⁄8
7
1 ⁄16
9
2 ⁄16
1
8.8 8-3⁄4
2 6 4 3⁄4 3
⁄4 1 3⁄16 2 1⁄16 3 11⁄16 1.6 4-5⁄8 8x2 13 1⁄2 11 3⁄4 ⁄8
7
2 1⁄16 2 9⁄16 17.6 8-3⁄4
3 7 1⁄2 6 3
⁄4 1 3⁄16 2 1⁄16 3 11⁄16 2.5 4-5⁄8 8x3 13 1⁄2 11 3⁄4 ⁄8
7
2 1⁄16 2 9⁄16 17.0 8-3⁄4
4 9 7 1⁄2 3
⁄4 1 1⁄2 2 1⁄16 3 15⁄16 4.2 8-5⁄8 8x4 13 ⁄2 1
11 ⁄4
3
⁄8
7
2 ⁄16
1
2 ⁄16
9
16.0 8-3⁄4
6 11 9 1⁄2 7
⁄8 1 9⁄16 2 1⁄16 4 7⁄16 5.3 8-3⁄4 8x6 13 1⁄2 11 3⁄4 ⁄8
7
2 1⁄16 2 9⁄16 13.4 8-3⁄4
8 13 1⁄2 11 3⁄4 7
⁄8 2 1⁄16 2 9⁄16 4 7⁄16 9.9 8-3⁄4 10 x 6 16 14 ⁄4 1
1 3 ⁄16
1
4 ⁄41
33.4 12-7⁄8
10 16 14 1⁄4 1 3 1⁄16 4 1⁄4 -- 19.6 12-7⁄8 10 x 8 16 14 1⁄4 1 3 1⁄16 4 1⁄4 27.3 12-7⁄8
Flanges meet O.D. bolt circle diameter, number of holes, and bolt hole diameter dimensions for ANSI B16.1 125 lb. cast iron sizes 1”-72” and ANSI B16.5
lb. steel for 1”-24” diameters.
* Available on order only - nonreturnable
(1) See Fig. 18 for flange dimensions.
† CL weight, multiply by 1.07 for RB, 1.1 for ZC
6
D
B A
Fig. 21/24/25*
Van Stone Flange
D F
Fig. 24 Fig. 25
F C
Size A Ref B Ref C Ref D ±1⁄16 E ±1⁄16 Fiberglass Steel Flange Lip
(In) (In.) (In.) (In.) (In.) (In.) Ring ±1⁄16 Ring ±1⁄8 1/4 + 1/16
B A
2 6 4 3⁄4 3
⁄4 1 2 7
⁄8 5
⁄8
3 7 1⁄2 6 3
⁄4 1 2 7
⁄8 5
⁄8
4 9 7 1⁄2 3
⁄4 1 2 7
⁄8 5
⁄8
6 11 9 ⁄2 1 7
⁄8 1 2 7
⁄8 3
⁄4 E
ELBOWS
Fig. 255C Fig. 257C
90 ° Short Radius 90 ° Long Radius
Elbow, Socket Elbow, Socket
Size A ±3⁄16 B ±1⁄8 Wt. †
Size A ±1⁄16 B ±1⁄16 Wt. † (In.) (In.) (In.) (Lb.)
(In.) (In.) (In.) (Lb.)
1 5 1 3⁄16 1.0
1 2 1⁄2 1 3⁄16 0.4
1 ⁄21
6 1 ⁄16
5
1.5
11⁄2 2 3⁄4 1 5⁄16 0.6 B 2 6 1⁄2 1 13⁄16 1.9
2 3 13⁄16 113⁄16 1.5 A 3 7 ⁄4 3
1 ⁄1613
2.2
3 4 7⁄16 113⁄16 2.4
4 9 1 ⁄1613
3.6
4 5 1⁄16 113⁄16 3.5
6 10 13⁄16 1 13⁄16 7.6
6 6 113⁄16 7.6
8 14 ⁄8 5
2 ⁄8
5
13.8
8 7 1⁄2 2 5⁄8 12.0
10 17 ⁄16 11
4 22.8
Sizes 1” - 6” PM Construction 12 20 3⁄16 4 31.4
8” HLU Construction
* Available on order only - nonreturnable
14 22 4 41.0
(2) Maximum Iron Pipe Thread size = 1”
† CL weight, multiply by 1.07 for RB, 1.1 for ZC HLU Construction
7
E
Fig. 255S* Fig. 255F E
90 ° Short Radius 90 ° Short Radius
Elbow, Flange x Socket B C Elbow, Flanged
B C
D D
A
A
Size A ±1⁄16 B Ref C Ref D Ref E Ref F Ref Wt. † Bolts Size A ±1⁄16 B Ref C Ref D Ref E Ref Wt. † Bolts
(In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size
1 3 15⁄16 3 1⁄8 4 1⁄4 7
⁄8 ⁄8
5
2 1⁄2 1.1 4-1⁄2 1 3 15⁄16 3 1⁄8 4 1⁄4 7
⁄8 ⁄8
5
1.8 4-1⁄2
11⁄2 4 5⁄16 3 7⁄8 5 1 3⁄16 ⁄8
5
2 3⁄4 1.9 4-1⁄2 11⁄2 4 13⁄16 3 7⁄8 5 1 3⁄16 ⁄8
5
3.3 4-1⁄2
2 5 7⁄8 4 3⁄4 6 1 3⁄16 3
⁄4 3 13⁄16 3.3 4-5⁄8 2 4 1⁄2 4 3⁄4 6 1 1⁄16 3
⁄4 4.4 4-5⁄8
3 6 1⁄2 6 7 1⁄2 1 3⁄16 3
⁄4 4 7⁄16 5.1 4-5⁄8 3 5 ⁄2
1
6 7 ⁄21
1 ⁄4 1 3
⁄4 8.3 4-5⁄8
4 7 1⁄8 7 1 ⁄2 9 1 1⁄2 3
⁄4 5 1⁄16 8.3 8-5⁄8 4 6 1⁄2 7 1⁄2 9 1 3⁄8 3
⁄4 13.0 8-5⁄8
6 8 1⁄16 9 1 ⁄2 11 1 9⁄16 ⁄8
7
6 14.2 8-3⁄4 6 8 9 ⁄2
1
11 1 ⁄16
9
⁄8
7
20.8 8-3⁄4
8 10 1⁄16 11 3⁄4 13 1⁄2 2 1⁄16 ⁄8
7
7 1⁄2 25 8-3⁄4 8 9 11 3⁄4 13 1⁄2 2 1⁄16 ⁄8
7
36.4 8-3⁄4
10 11 14 1⁄4 16 3 1⁄16 1 52.6 12-7⁄8
12 12 17 19 3 ⁄16
1
1 73.4 12-7⁄8
Size A ±1⁄16 B Ref C Ref D Ref E Ref Wt. † Bolts Fig. 257F
(In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size 90 ° Long Radius
Elbow, Flanged
1 6 7⁄16 3 1⁄8 4 1⁄4 7
⁄8 5
⁄8 2.4 4-1⁄2
E
11⁄2 7 9⁄16 3 7⁄8 5 1 3⁄16 5
⁄8 4.2 4-1⁄2
2 8 9⁄16 4 3⁄4 6 1 3⁄16 3
⁄4 5.2 4-5⁄8 B C
3 9 ⁄1613
6 7 ⁄21
1 ⁄16
3 3
⁄4 9.1 4-5⁄8
4 11 1⁄16 7 1⁄2 9 1 1⁄2 3
⁄4 14.6 8-5⁄8
6 11 1⁄2 9 1⁄2 11 1 9⁄16 7
⁄8 17.1 8-3⁄4 D
8 14 11 ⁄4 3
13 ⁄2 1
2 ⁄16
1 7
⁄8 29.3 8- ⁄4
3 A
E
3 9 ⁄16
13
6 7 ⁄21
1 ⁄16 3 3
⁄4 7 ⁄43
5.8 4-5⁄8
4 11 1⁄16 7 1⁄2 9 1 1⁄2 3
⁄4 9 8.5 8-5⁄8
B C 6 12 7⁄8 9 1⁄2 11 1 9⁄16 ⁄8
7
10 3⁄16 14.4 8-3⁄4
F 8 17 ⁄16
3
11 ⁄4 3
13 ⁄2 1
2 ⁄16 1
⁄8
7
14 ⁄8 5
25.7 8-3⁄4
10 21 15⁄16 14 1⁄4 16 3 1⁄16 1 17 11⁄16 49.7 12-7⁄8
D 12 24 7⁄16 17 19 3 1⁄16 1 20 3⁄16 65.2 12-7⁄8
A
14* 26 ⁄8 3
18 3⁄4 21 4 ⁄8 3
1 ⁄81
22 105.1 12-1
* Available on order only - nonreturnable
** Tolerance exception - Fig. 257F x 14 - A ±1⁄8
† CL weight, multiply by 1.07 for RB, 1.1 for ZC
8
A
D
Fig. 265C A Fig. 265F A
45 ° Short Radius B 45 ° Short Radius E
Fig. 265S* A
D
45 °Elbow,
Flange x Socket E
G
F
B C
A G
Size PM ± ⁄16 1
HLU ± ⁄8 1
B Ref C Ref D Ref E Ref F PM ± ⁄16 1
HLU ±1⁄8 Wt. † Bolts
(In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size
1 3 15⁄16 3 3⁄16* 3 1⁄8 4 1⁄4 ⁄8
7
⁄8
5
1 3⁄16 2 1⁄2 1 3⁄4 1.3 4-1⁄2
11⁄2 3 7⁄8 3 13⁄16* 3 7⁄8 5 1 3⁄16 ⁄8
5
1 5⁄16 2 5⁄16 2 1⁄4 2.0 4-1⁄2
2 5 5⁄16 4 9⁄16* 4 3⁄4 6 1 3⁄16 3
⁄4 113⁄16 3 1⁄4 2 1⁄2 3.2 4-5⁄8
3 5 ⁄1613
5 ⁄16*1
6 7 ⁄2 1
1 ⁄16
3 3
⁄4 1 ⁄16
13
3 ⁄4
3
3 4.9 4-5⁄8
4 6 1⁄8 6 1⁄16* 7 1⁄2 9 1 1 ⁄2 3
⁄4 113⁄16 4 1⁄16 4 8.0 8-5⁄8
6 6 ⁄1613
7 ⁄16*1
9 ⁄2 1
11 1 ⁄16
9
⁄8
7
1 ⁄16
13
4 3⁄4 5 13.7 8-3⁄4
8 -- 8 1⁄2 11 3⁄4 13 1⁄2 2 1⁄16 ⁄8
7
2 5⁄8 -- 5 15⁄16 15.9 8-3⁄4
10 -- 11 15⁄16 14 1⁄4 16 3 1⁄16 1 4 -- 7 11⁄16 39.3 12-7⁄8
12 -- 12 ⁄16 15
17 19 3 ⁄16
1
1 4 -- 8 ⁄16 11
57.5 12-7⁄8
14 -- 13 3⁄4 18 3⁄4 21 4 3⁄8 11⁄8 4 -- 9 3⁄8 70 12-1
9
TEES
A B
Size PM ±1⁄16 HLU ±1⁄8 PM ±1⁄16 HLU ±1⁄8 C ±1⁄8 Wt. †
(In.) (In.) (In.) (In.) (In.) (In.) (Lb.) Fig. 275C
Tee, Socket
1 2 ⁄2
1
3 ⁄2*
1
5 7 1 ⁄163
0.8
11⁄2 2 3⁄4 4* 5 1⁄2 8 1 5⁄16 0.9 B
Tolerance Exception
C
2 3 ⁄16
13
4 ⁄2*
1
7 ⁄8 5
9 1 ⁄16
13
2.1 275C x 10 A ±1⁄8
A ±1⁄8
3 4 7⁄16 5 1⁄2* 8 7⁄8 11 113⁄16 3.4 275C x 12 A ±1⁄8
4 5 1⁄16 6 1⁄2* 10 1⁄8 13 113⁄16 5.3
6 -- 8 -- 16 113⁄16 11.2
8 -- 7 ⁄16
11
-- 15 ⁄8 3
2 ⁄8
5
15.5
A
10 -- 12 ⁄16 3
-- 24 ⁄8 3
4 29.3
12 -- 13 3⁄16 -- 26 3⁄8 4 38.8
14 -- 13 ⁄8 5
-- 27 ⁄4
1
4 40.8
A B
Fig. 275F Size PM ±1⁄16 HLU ±1⁄8 PM ±1⁄16 HLU ±1⁄8 C Ref D Ref E Ref F Ref Wt. † Bolts
Tee, Flanged (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size
B
D
1 3 15⁄16 415⁄16 7 7⁄8 9 7⁄8 4 1⁄4 7
⁄8 5
⁄8 3 1⁄8 2.9 4-1⁄2
11⁄2 4 13⁄16 5 9⁄16 9 5⁄8 11 1⁄8 5 1 3⁄16 5
⁄8 3 7⁄8 5.0 4-1⁄2
E
2 4 ⁄2 1
6 ⁄16
9
9 13 ⁄8 1
6 1 ⁄161 3
⁄4 4 ⁄4
3
7.6 4-5⁄8
F C 3 5 1⁄2 7 9⁄16 11 15 1⁄8 7 1⁄2 1 1⁄4 3
⁄4 6 12.6 4-5⁄8
4 6 ⁄2 1
8 ⁄16
9
13 17 ⁄8 1
9 1 ⁄8 3 3
⁄4 7 ⁄2
1
19.0 8-5⁄8
6 -- 8 -- 16 11 1 9⁄16 7
⁄8 9 1⁄2 32.7 8-3⁄4
8 -- 9 -- 18 13 1⁄2 2 1⁄16 7
⁄8 11 3⁄4 51.7 8-3⁄4
A
10 -- 11 -- 22 16 3 ⁄161
1 14 ⁄4 1
90 12-7⁄8
12 -- 12 -- 24 19 3 1⁄16 1 17 125 12-7⁄8
14 -- 18 -- 36 21 4 3⁄8 1 1⁄8 18 3⁄4 180 12-1
A G Wt. †
Size PM ± ⁄16 1
HLU ± ⁄8 1
B Ref C Ref D Ref E Ref F Ref PM ± ⁄16 1
HLU ± ⁄8 1
One Flg Two Flgs Fig. 275S*
Tee, Flanged x Socket
(In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) (Lb.)
1 3 15⁄16 4 15⁄16* 4 1⁄4 7
⁄8 ⁄8
7
3 1⁄8 1 3⁄16 2 1⁄2 3 1⁄2 1.5 2.2
C
1 ⁄2
1
4 ⁄16
5
5 ⁄16*
9
5 1 ⁄16
13
⁄8
5
3 ⁄8
7
1 ⁄16
5
2 ⁄43
4 2.2 3.5
2 5 7⁄8 6 9⁄16* 6 113⁄16 3
⁄4 4 3⁄4 113⁄16 3 13⁄16 4 1⁄2 3.9 5.8 D
3 6 ⁄2
1
7 ⁄16*
9
7 ⁄2 1
1 ⁄16
13 3
⁄4 6 1 ⁄16
13
4 ⁄16
7
5 ⁄2
1
7.0 10.6
E B
4 7 ⁄8
1
8 ⁄16*
9
9 1 ⁄2 1 3
⁄4 7 ⁄2
1
1 ⁄16
13
-- 6 ⁄2
1
11.4 17.4
6♦ -- 10 1⁄16 11 1 9⁄16 ⁄8
7
9 1⁄2 113⁄16 6 8 19.3 27.5
F
8 -- 10 ⁄4 1
13 ⁄2 1
2 ⁄16
1
⁄8
7
11 ⁄4 3
2 ⁄85
-- 7 ⁄16
11
22.2 28.9
G A
10 -- 16 7⁄16 16 3 1⁄16 1 14 1⁄4 4 -- 12 3⁄16 60 90
12 -- 17 7⁄16 19 3 1⁄16 1 17 4 -- 13 3⁄16 95 140
10
LATERALS
E
Fig. 266C Fig. 266F*
Lateral, Socket C
Lateral, Flanged D
B
B
A F
A
B
B
Size A ±1⁄4 B ±1⁄4 C ± 1⁄8 Wt. † Size A ±1⁄8 B ±1⁄8 C Ref D Ref E Ref F Ref Wt.† Bolts
(In) (In.) (In.) (In.) (Lb.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size
2 10 1⁄8 7 1⁄2 1 13⁄16 2.0 2 12 1⁄2 8 11⁄16 6 4 3⁄4 3
⁄4 1 1⁄16 7.6 4-5⁄8
3 11 7⁄8 8 15⁄16 1 13⁄16 3.7 3 14 1⁄2 10 1⁄8 7 1⁄2 6 3
⁄4 1 1⁄4 12.6 4-5⁄8
4 13 ⁄16
11
11 1 ⁄16 13
8 4 16 11⁄16 12 1⁄2 9 7 1⁄2 3
⁄4 1 3⁄8 19.0 8-5⁄8
6 24 ⁄2 1
17 ⁄8 3
1 ⁄16 13
13.9 6 28 ⁄8
5
19 ⁄16
7
11 9 ⁄21 7
⁄8 1 ⁄16
9
32.7 8-3⁄4
8 29 1⁄4 21 5⁄16 2 5⁄8 35.5 8 31 3⁄4 22 9⁄16 13 1⁄2 11 3⁄4 7
⁄8 2 1⁄16 51.7 8-3⁄4
10 36 ⁄8 7
26 ⁄16 7
4 51.7 10 45 ⁄8
3
30 ⁄16
11
16 14 ⁄4 1
1 3 ⁄16
1
112 12-7⁄8
12 43 1⁄4 31 15⁄16 4 69.1 12 51 3⁄4 36 3⁄16 19 17 1 3 1⁄16 152 12-7⁄8
CROSSES
C
Fig. 285C Fig. 285F* D
Cross, Socket C
Cross, Flanged E
F
B B
A
A
A
Size A ±1⁄4 B ±1⁄8 C ±1⁄8 Wt.† Size A ±1⁄8 B ±1⁄8 C Ref D Ref E Ref F Ref Wt. † Bolts
(In) (In.) (In.) (In.) (Lb.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (Lb.) No/Size
2 6 3⁄8 3 3⁄16 113⁄16 1.4 2 8 3⁄4 4 3⁄8 6 4 3⁄4 1 3⁄16 3
⁄4 9.3 4-5⁄8
3 8 4 1 ⁄16
13
2.3 3 10 ⁄8 3
5 ⁄16
3
7 ⁄2 1
6 1 ⁄16 3 3
⁄4 13.9 4-5⁄8
4 10 5⁄8 5 5⁄16 113⁄16 5.5 4 13 5⁄8 6 13⁄16 9 7 1⁄2 1 1⁄2 3
⁄4 23.5 8-5⁄8
6 16 8 113⁄16 15.7 6 16 8 11 9 1⁄2 1 9⁄16 7
⁄8 57.5 8-3⁄4
8 15 ⁄8 3
7 ⁄1611
2 ⁄8
5
15.5 8 18 9 13 ⁄2 1
11 ⁄4 3
2 ⁄16 1 7
⁄8 71.7 8-3⁄4
10 24 3⁄8 12 3⁄16 4 45.6 10 22 11 16 14 1⁄4 3 1⁄16 1 126 12-7⁄8
12 26 3⁄8 13 3⁄16 4 57.2 12 24 12 19 17 3 1⁄16 1 170 12-7⁄8
11
PIPE SUPPORT/WEAR PAD
110°±10°
6 3- ⁄16
15
4 ⁄8
5
8 4-15⁄16 5-5⁄8 ⁄8
5
10 6- ⁄8
1
8- ⁄8
3 3
⁄4
R
12 7- ⁄32
3
8- ⁄8
3 23
⁄32
14* 7-25⁄32 8-3⁄8 25
⁄32
FLOOR DRAIN
Fig. 203
Sealable Floor Drain
1/ ”
4 20 UNC x 3/8
DP 316 SS insert
3 places on “D” F
bolt circle I
H
D
G
Sealable Drain Dimensional Data
Size A ±1⁄8 B C D E F ±1⁄8 G H I
C
(In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) 1/4 “
E A
6x2 6 1⁄4 2 3⁄8 2 6 3⁄8 6 8 7⁄8 5 3⁄4 7 7 3⁄4 1/2 “ + 1/8 “ > 0
6x3 6 ⁄4
1
3 ⁄2 1
2 6 ⁄8
3
6 8 ⁄8 7
5 ⁄4
3
7 7 ⁄4 3
Fig. 33C
6x4 6 4 1⁄2 2 6 3⁄8 6 8 7⁄8 5 3⁄4 7 7 3⁄4 Reducer
Insert
12 x 4 8 11⁄16 4 1⁄2 1 9⁄16 13 3⁄8 8 15 1⁄2 12 3⁄4 14 14 1⁄2 B
required for
12 x 6 8 ⁄16
11
6 ⁄8 5
1 ⁄16
9
13 ⁄8 3
8 15 ⁄2 1
12 ⁄4
3
14 14 ⁄2 1
6x2, 6x3,
12 x 8 8 8 ⁄8 5
1 ⁄16
9
13 ⁄8 3
8 15 ⁄2 1
12 ⁄4
3
14 14 1⁄2 12x4 and
12x6 sizes.
Note: Standard outlet straight socket. 2” - 6” FNPT outlet available on request.
12
CENTRICLAMP
Physical Data
Pipe
3 150 150 75 342 ⁄16
7
Fig. 36
End Adapter 4 150 150 150 428 1
⁄2
6 150 150 150 441 1
⁄2
8 150 125 175 448 1
⁄2
A
Fig. 38* Fig. 39*
SS Clamp Blind Flange 45°
C
C
B B
13
ASSEMBLED FITTINGS REFERENCE DIMENSIONS
Fig. 8C* A
Fig. 6*
Reducer
C
Adapter A
Socket Iron Pipe Male x B
B
Socket Female
C D
14
C
Fig. 255CR* Fig. 257CR*
90° Short Radius 90° Long Radius Size A Ref B Ref C Ref
Reducer, Socket Reducer, Socket
C (In.) (In.) (In.) (In.)
A 6 10 13⁄16 11 113⁄16
8 14 ⁄8 5
14 ⁄8 5
2 5⁄16
B 10 1711⁄16 17 7⁄8 4
A
Size A Ref B Ref C Ref 12 20 3⁄16 20 3⁄8 4
(In.) (In.) (In.) (In.)
11⁄2 2 3⁄4 2 15⁄16 1 5⁄16 B Assemble using Fig. 257C Elbow and Fig. 33
Reducer Bushing
2 3 13⁄16 3 1⁄2 1 5⁄16
3 4 7⁄16 4 5⁄8 113⁄16
4 5 ⁄16
1
5 ⁄4
1
113⁄16
6 6 6 3⁄16 113⁄16
Fig. 257FR*
8 7 1⁄2 7 1⁄2 2 5⁄16 90° Long Radius
A
Fig. 255FR*
E
90° Short Radius F
Reducer, Flanged D
E F
B
C
D
B
C Size A Ref B Ref C Ref D Ref E Ref F Ref Bolts
Size A Ref B Ref C Ref D Ref E Ref F Ref Bolts (In.) (In.) (In.) (In.) (In.) (In.) (In.) No/Size
(In.) (In.) (In.) (In.) (In.) (In.) (In.) No/Size 6x4 12 7⁄8 7 1⁄2 9 1 1⁄2 14 5⁄16 3
⁄4 8-5⁄8
11⁄2 x 1 4 5⁄16 3 1⁄8 4 1⁄4 7
⁄8 63⁄16 ⁄8
5
4-1⁄2 8x6 17 3⁄16 9 1⁄2 11 1 9⁄16 17 3⁄8 7
⁄8 8-3⁄4
2 x 11⁄2 5 7⁄8 3 7⁄8 5 1 3⁄16 7 ⁄8
5
4-5⁄8 10 x 8 2115⁄16 11 3⁄4 13 1⁄2 2 1⁄16 21 1⁄4 7
⁄8 8-3⁄4
3x2 6 ⁄2
1
4 ⁄4
3
6 1 ⁄16
3
7 ⁄85 3
⁄4 4- ⁄8
5 12 x 10 24 ⁄16 7
14 ⁄4 1
16 3 ⁄161
26 ⁄8 3
1 12-7⁄8
4x3 7 1⁄8 6 7 1⁄2 1 3⁄16 8 1⁄4 3
⁄4 4-5⁄8 Assemble using Fig. 257C Elbow, Fig. 33 Reducer Bushing, Fig. 17 Pipe
Stub and Fig. 18 Socket Flange
6x4 8 1⁄16 7 1⁄2 9 1 1⁄2 9 1⁄2 3
⁄4 8-5⁄8
8x6 10 1⁄16 9 1⁄2 11 1 9⁄16 10 1⁄2 ⁄8
7
8-3⁄4
F
Assemble using Fig. 255C Elbow and Fig. 33 Reducer Bushing, Fig. Fig. 265FR(3)* D
17 Pipe Stub and Fig. 18 Socket Flange B 45° Reducer, A
C Flanged E
A B C
Fig. 265CR(3)
45° Reducer, Socket
A
A B
Size PM± 1⁄16 HLU± 1⁄8 B Ref C Ref D Ref E Ref F Ref Bolts
Size PM± 1⁄16 HLU± 1⁄8 PM Ref HLU Ref C Ref (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) No/Size
(In.) (In.) (In.) (In.) (In.) (In.)
11⁄2 x 1 3 7⁄8 3 13⁄16 3 1⁄8 4 1⁄4 7
⁄8 5
⁄8 5 3⁄4 4-1⁄2
11/2 2 5⁄16 2 1⁄4 2 1⁄2 2 7⁄16 1 5⁄16
2 x 11⁄2 5 5⁄16 4 9⁄16 3 7⁄8 5 1 3⁄16 5
⁄8 7 5⁄16 4-5⁄8
2 3 1⁄4 2 1⁄2 2 15⁄16 2 3⁄16 1 5⁄16
3x2 5 ⁄16
13
5 ⁄16
1
4 ⁄4
3
6 1 ⁄16
3 3
⁄4 7 ⁄16
13
4-5⁄8
3 3 3⁄4 3 3 15⁄16 3 3⁄16 113⁄16
4x3 6 1⁄8 6 1⁄16 6 7 1⁄2 1 3⁄16 3
⁄4 8 1⁄8 8-5⁄8
4 4 1⁄16 4 4 1⁄4 4 3⁄16 113⁄16
6x4♦ 6 13⁄16 7 1⁄16 7 1⁄2 9 1 1 ⁄2 7
⁄8 8 1⁄4 8-3⁄4
6 4 3⁄4 5 415⁄16 5 3⁄16 113⁄16
8x6 -- 8 ⁄2
1
9 ⁄2
1
11 1 ⁄16
9 7
⁄8 8 ⁄16
11
8-3⁄4
8 -- 5 15⁄16 -- 5 13⁄16 2 5⁄16
10 x 8 -- 1115⁄16 11 3⁄4 13 1⁄2 2 1⁄16 1 11 1⁄4 12-7⁄8
10 -- 7 11⁄16 -- 7 7⁄8 4
12 x 10 -- 12 15⁄16 14 1⁄4 16 3 1⁄16 1 14 7⁄8 12-7⁄8
12 -- 8 11⁄16 -- 8 7⁄8 4
Assemble using Fig. 265F Elbow and Fig. 33 Reducer Bushing,
Assemble using Fig. 265C Elbow and Fig. 33 Pipe Stubs and Fig 18 Socket Flanges
Reducer Bushing
♦ 6” PM available in CL only
* Available on order only - nonreturnable. 15
(3) Reductions beyond one pipe size for reduced pressure applications
are available. (See Fig. 33)
C
Fig. 275CR*
Reducer, Socket
A B
A B
Size
(In.) PM ±1⁄16 HLU ± 1⁄8 PM Ref HLU Ref C Ref
1 ⁄2 1
2 ⁄4
3
4 2 ⁄16
15
4 1 5⁄16
2 3 13⁄16 4 1⁄2 3 1⁄2 4 3⁄16 1 5⁄16
3 4 ⁄16
7
5 ⁄2
1
4 ⁄8
5
5 ⁄16
11
113⁄16
4 5 1⁄16 6 1⁄2 5 1⁄4 6 11⁄16 113⁄16
6♦ 6 8 6 3⁄16 8 3⁄16 113⁄16
8 -- 7 ⁄16
11
-- 7 ⁄16
9
2 5⁄16
10 -- 12 3⁄16 -- 12 3⁄8 4
12 -- 13 3⁄16 -- 13 3⁄8 4
Fig. 37*
Adapter Nipple
Size A Ref B Ref C Ref Wt. †
(In.) (In.) (In.) (In.) (Lb.)
B
2 3 3⁄4 2 1⁄16 4 13⁄16 1.0
Fig. 17
Assembly Pipe Stubs 3 5 2 1⁄16 4 13⁄16 1.7
A 4 6 ⁄8
3
2 ⁄16
1
4 ⁄16 13
2.2
A
6 8 ⁄8
7
2 ⁄16
1
4 ⁄16 13
4.0
8 11 1⁄2 2 1⁄16 4 13⁄16 6.3
B
Size A D
(In.) (In.) F
Fig. 275FR(3)*
1 2 3⁄8 Reducer, C B
3 3 5⁄8
4 3 5⁄8 A
6 3 5⁄8 Size B Ref C Ref D Ref F Ref J Ref
(In.) PM Ref HLU Ref (In.) (In.) (In.) (In.) (In.)
8 5 1⁄4
1 1⁄2 x 1 4 5⁄16 5 9⁄16 41⁄4 31⁄8 7
⁄8 5
⁄8 6 3⁄16
10 8
2 x 1 ⁄2 1
5 ⁄8
7
6 ⁄16
9
5 3 ⁄8
7
1 ⁄16
3 5
⁄8 7
12 8
3x2 6 ⁄2
1
7 ⁄16
9
6 4 ⁄4
3
1 ⁄16
3 3
⁄4 7 5⁄8
14 8
4x3 7 1⁄8 8 9⁄16 71⁄2 6 13⁄16 3
⁄4 8 1⁄4
6x4 8 ⁄16
1
10 ⁄16 1
9 7 ⁄2
1
1 ⁄2
1 3
⁄4 9 1⁄2
♦ 6” PM available in CL only 8x6 10 1⁄4 11 91⁄2 19⁄16 7
⁄8 10 9⁄16
* Available on order only - nonreturnable. 10 x 8 16 ⁄16 7
13 ⁄2
1
11 ⁄4
3
2 ⁄16
1 7
⁄8 15 11⁄16
(3) Reductions beyond one pipe size for reduced pressure applications
are available. (See Fig. 33) 12 x 10 17 7⁄16 16 141⁄4 31⁄16 1 19 3⁄8
16
DIMENSIONS
Take off Dimensions for Adhesive Socket Fittings
A
A
A
A
Fig. 255C
A
A B
Fig. 265C
90° Short or Long Tee A Cross
45 °Elbow Radius Elbow Fig. 275C
Lateral Fig. 285C
Fig. 266C
Pipe Stop to Fittings’ Center Line Dimensions
Long
Short Radius Radius 90°
45° Elbow 90° Elbow Elbow Tee Lateral Cross
PM HLU PM HLU
Size A A A A A A A B A
(In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.)
1 1 5⁄16 9
⁄16 1 5⁄16 3 13⁄16 1 5⁄16 2 5⁄16 -- -- --
1 ⁄2
1
1 15
⁄16 1 ⁄16
7
4 ⁄16
11
1 ⁄16
7
2 11⁄16 -- -- --
2 1 ⁄16
7 11
⁄16 2 4 ⁄16
11
2 2 ⁄16
11
5 ⁄16
11 13
⁄16 1 3⁄8
3 1 15⁄16 1 3⁄16 2 5⁄8 5 15⁄16 2 5⁄8 3 11⁄16 7 1⁄8 1 1⁄8 2 3⁄16
4 2 ⁄4
1
2 ⁄16 3
3 ⁄4
1
7 ⁄16
3
3 ⁄4
1
4 ⁄16
11
9 ⁄16
3 7
⁄8 3 1⁄2
6 2 15⁄16 3 3⁄16 4 3⁄16 9 -- 6 3⁄16 15 9⁄16 5 5⁄16 6 3⁄16
8 -- 3 5⁄16 4 7⁄8 12 -- 5 1⁄16 18 11⁄16 5 5⁄16 5 1 ⁄16
10 -- 3 11⁄16 -- 13 11⁄16 -- 8 3⁄16 22 7⁄16 6 7⁄16 8 3⁄16
12 -- 4 ⁄1611
-- 16 ⁄16 3
-- 9 ⁄16
3
27 ⁄16
15
7 ⁄16
5
9 3⁄16
14 -- 5 3⁄8 -- 18 -- 9 5⁄8 -- -- --
How to Read Flanged or Reducing Fittings CROSS
TEE
C C C
C
A B A B
A B A B
17
ADHESIVES
Weldfast ZC-275 Epoxy Adhesive for Adhesive Socket Joints
Weldfast CL-200
18
ACCESSORIES
19
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes.
Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way
assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is
any warranty expressed or implied. Always cross-reference the bulletin date with the most current version listed at the web site
noted in this literature.
www.fgspipe.com • fgspipe@nov.com