Professional Documents
Culture Documents
Tugas 4 Si-5253 Perancangan Dan Analisis Operasional Konstruksi
Tugas 4 Si-5253 Perancangan Dan Analisis Operasional Konstruksi
Tugas 4 Si-5253 Perancangan Dan Analisis Operasional Konstruksi
Dosen:
Ir.Muhamad Abduh, MT., Ph.D., Ir. Reini D. Wirahadikusumah, MSCE., Ph.D.
PROBLEM
5.2. Three trucks haul material from a loading tower to an airfield construction job. At the fill
(i.e., airfield) a spotter shows each truck where to dump. After the trucks dump material,
they return to the loading tower. A front loader is used to load the tower. The tower can
hold up to three loads. Draw a circle-and-square (CYCLONE) diagram of this system,
Indicate all cycles and where the units in the system would be initialized at time zero.
SOLUTION
2) Identify Resource
R 1 : Dump Truck
R 2 : Tower
R 3 : Loader
R 4 : Spotter
Work Task
WT 1 WT 2 WT 3 WT 4 WT 5
Resource
R1
R2
R3
R4
R1 :
WT 2 WT 3 WT 4 WT 5
R2 :
WT 1 WT 2
R3 :
WT 1
R4 :
WT 4
Page 1|4
NOVINDA AULIA -25017040-
TUGAS PAOK #4
M
M
1 2 M 3 4 5 6 7 9 10
TT
T
11
Page 2|4
NOVINDA AULIA -25017040-
TUGAS PAOK #4
PROBLEM
6.1. Brick pallets are picked up from the supplier and transported by truck to the job site,
where they are off-loaded and stockpiled. Draw a model of this process similar to the
one developed for the earth-hauling operation shown in Figure 6.3.
SOLUTION
2) Identify Resource
R 1 : Truck
R 2 : Loader
R 3 : Off-loader
R1 :
WT 1 WT 2 WT 3 WT 5
R2 :
WT 1
R3 :
WT 3 WT 4
Page 3|4
NOVINDA AULIA -25017040-
TUGAS PAOK #4
1 2 3 4 5 6 8 9
11 10
Page 4|4