Professional Documents
Culture Documents
ATLAS TUBE - Steel ASTM A1085 HSS Catalogue
ATLAS TUBE - Steel ASTM A1085 HSS Catalogue
A1085
A Dynamic Step Forward
Optional heat-treating
Supplemental
N/A
Requirements
Optional varying CVN
1.9 3.432 — — — —
2.375 4.385 — — — —
2.5 4.646 — — — —
2.875 5.400 — — — —
2x2 4.320 — — — — — — —
2x1 3.040 — — — — — — —
3x1 4.320 — — — — — — —
Rolled every 2–6 weeks; some sizes may be subject to minimums of 15–30 tons. Rolled every 2–6 weeks; minimum is one standard bundle.
Rolled every 6–12 weeks; some sizes may be subject to minimums of 15–30 tons. Jumbo size; available from stock or special order.
Please contact Atlas Tube for additional details on specifications or if the size you are looking for is not listed.
ATU-020818
Standard specification for pipe, steel, Standard specification for cold-formed Standard specification for cold-formed
black and hot-dipped, zinc-coated, welded and seamless carbon steel welded carbon steel hollow structural
welded and seamless structural tubing in rounds and shapes sections (HSS)
INTENDED USE
Superior surface finish (bare — no mill All the advantages of A500, as well as
lacquer coating applied); higher strength- standard requirement for Charpy V-notch
— to-weight ratio; readily available on a two- toughness; no section property reduction
to three-week rolling cycle; specific lengths factor required; ideal for use in structures
available from production: 18'–125' subject to fatigue and seismic loading
TECHNICAL INFORMATION
SPECIFICATIONS ASTM A53-12 ASTM A500-13 ASTM A1085-15
Yield Strength 30,000 psi 35,000 psi 46,000 psi 50,000 psi min. / 70,000 psi max.
Tensile Strength Min. 48,000 psi 60,000 psi 62,000 psi 65,000 psi
Straightness Not specified 1/8" x length (in feet), divided by five 1/8" x length (in feet), divided by five