Professional Documents
Culture Documents
Core Ez - Core Drilling: Bit Selection Guide
Core Ez - Core Drilling: Bit Selection Guide
Other Accessories
Extendable Core Bit Angle Drilling Washer Slurry Ring Water Tank Kits
Ask about our Continental Special washers for Slurry water for 3.5 gallon manual
Tubing Extendable Core Bits drilling at an angle clean coring removal water pump.
Available sizes: 3” - 6” Part Number: US27810-1
Part Number: US28273 Part Number: 5 gallon battery
Part Number: US28261 - 6inch powered pump.
Depends on Bit Size US28263 - 10inch Part Number: US27815
1-866-987-7297 | www.ussaws.com
3702 W. Central Avenue
Santa Ana, CA 92704
8004B E. Broadway Ave
Tampa, FL 33619
1-866-987-7297
ussaws.com
Phone 714 434 7297 Phone 813 621 8015
Fax 714 434 7299 Fax 813 621 7125
PORTABLE CORING SYSTEM WHAT SETS THE CORE EZ APART?
Features Deluxe Package Other Required Step 1: Mark Center of Core Step 2: Anchor Pin
• Lightweight Includes Equipment & Drill Anchor Hole & Mount Guide Post
• Easy and fast set-up and • Grinder • Water Supply
break-down • Grinder Coupling* • Core Bit
• No measuring off-sets Guide Post • 3/8” Masonry Drill
• Won’t damage surfaces • Water Feed Tube Bit
• Unit holds the core once • Hex Core Bit Adapter • Hammer Drill
drilling is complete • Gearbox • 3/8” Wedge Anchor
• All equipment fits in one • Carry Case
case
Specifications
Part Number US28000
Capacity 3” - 10” Core Bits (not included)
Electrical Requirements 115V (minimum 15 amps) Step 3: Mount Step 4: Mount
Core Bit Assembly Gearbox
Motor W24-230 9” Metabo Grinder
Dimensions 24” x 17” x 11”
Weight 65 lbs
Gearbox
Carry Case
Anchor
Guide Post Water Feed Hex Core Bit
Tube Adapter *Factory Installed