Professional Documents
Culture Documents
Valquatight Gasket: Valqua No. 6590 Product Name BLACKTIGHT (Basic Design)
Valquatight Gasket: Valqua No. 6590 Product Name BLACKTIGHT (Basic Design)
Spiral Wound Gaskets use Non-Asbestos inorganic paper, VALQUAFOIL™ (expanded graphite) and VALFLON™ (PTFE) tape as filler materials,
and exhibit good elasticity by means of a V-shaped hoop.
Applicable fluids Water, Sea water, Hot water, Steam,Crude oil, Alcohol, Animal & vegetable oil, Heat transfer oil,General solvent, Weak
acid, Weak alkali,Strong oxidizing acid, strong alkali,Air, Nitrogen gas, Inert gas,Exhaust gas,Inflammable
gas,Poisonous,Extremely low temperature liquids,
Inappropriate fluid Oxidizing acids such as hot, concentrated sulfuric acid, concentrated nitric acid and oxygen.
Application In particular best suited as gaskets for use handling high temperature & high pressure steam (except HTS), as well as
very low temperature fluids such as LNG, liquid nitrogen and liquid hydrogen.
■ Dimensions
Standard Flange
For JIS pipe flanges=10K、16K、20K、30K、40K、63K For JPI and ANSI pipe flanges=Classes 150, 300, 400, 600, 900, 1500, 2500 Gaskets
complying with other standards such as ASME and MSS are also available. ▼ For non-st
Non-Standard Flange
In case of products with gasket thickness of 1.6 mm, only the basic type with hoop made of SUS316 are available.
■ Design data
Basic design With outer ring With inner ring With inner/outer ring
■ Available ranges
Temperature(℃) Pressure(MPa)
-270∼450 30.0
■ Design criteria
The recommended tightening stress are the pressures required under normal conditions, and correspond to the projected area of the gasket,
where fluid pressure is not taken into consideration.
Separate consultation is required, where flange deformation is anticipated for large diameter gaskets.