Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

DL/Snow/Wind are ASD loads irrespective of

ASCE 7 load definition


Comb3,5,6a, and 7 are Service condition loads

TM
GeniusTracker Top of Pile Loads

Project: Nestlewood
Address: Tate Township, Clermont County, Ohio, 38.921487°, -84.027937
Update: 5/26/2021 By: SR

Standard Posts Combo 3 Combo 5 Combo 6a Combo 7


Dead 0.7 0.7 0.7 0.4
Snow 0.9 0.0 0.7 0.7
Vertical Force
Interior Wind 0.0 1.0 0.8 -1.0
Total 1.6 1.7 2.2 -0.6
Lateral Force Wind 0.0 1.3 1.0 -1.2

Dead 0.7 0.7 0.7 0.4

Vertical Force Snow 0.8 0.0 0.6 0.0


Perimeter Wind 0.0 1.7 1.3 -1.8
Total 1.5 2.4 2.6 -1.4
Lateral Force Wind 0.0 2.3 1.7 -2.4

Center Posts Combo 3 Combo 5 Combo 6a Combo 7


Dead 0.7 0.7 0.7 0.4
Snow 0.9 0.0 0.7 0.7
Vertical Force
Wind 0.0 1.0 0.8 -1.0
Total 1.6 1.7 2.2 -0.6 Moment will be
Interior Lateral Force Wind 0.0 1.3 1.0 -1.2
Dead 3.1 -25.9 -25.9 -15.5
applicable for top
Moment
Snow -41.8 0.0 -31.3 0.0 1100mm of pier
Wind 0.0 8.3 6.2 -24.2
Total -38.7 -17.6 -45.3 -39.7 due to Motor/
Absorber
Dead 0.7 0.7 0.7 0.4
Snow 0.8 0.0 0.6 0.0 assembly.
Vertical Force
Wind 0.0 1.7 1.3 -1.8
Total 1.5 2.4 2.6 -1.4
Perimeter Lateral Force Wind 0.0 2.3 1.7 -2.4
Dead 3.1 -25.9 -25.9 -15.5
Snow -41.8 0.0 -31.3 0.0
Moment
Wind 0.0 -53.9 -40.4 -56.9
Total -38.7 -79.7 -78.1 -72.4

Shock Absorber Posts Combo 3 Combo 5 Combo 6a Combo 7


Dead 0.4 0.4 0.4 0.2
Snow 0.5 0.0 0.4 0.0
Vertical Force
Wind 0.0 1.7 1.3 -1.5
Total 0.9 2.1 2.0 -1.3
Perimeter Lateral Force Wind 0.0 2.1 1.6 -2.0
Dead -7.6 -7.6 -7.6 -4.5
Snow 12.2 0.0 9.2 0.0
Moment
Wind -6.9 -36.0 -34.8 -33.9
Total -14.5 -43.6 -42.4 -38.4

Dead 0.4 0.4 0.4 0.2


Snow 0.5 0.0 0.4 0.0
Vertical Force
Wind 0.0 1.7 1.3 -1.5
Total 0.9 2.1 2.0 -1.3
Interior Lateral Force Wind 0.0 2.1 1.6 -2.0
Dead -7.6 -7.6 -7.6 -4.5
Snow 12.2 0.0 9.2 0.0
Moment
Wind -6.9 -3.2 -10.3 -15.6
Total -14.5 -10.8 -17.8 -20.1
1. All forces shown are in kips (k), moments are in kip*inch (k*in)
2. Loads shown are service level (do not include safety factors) and account for load combination factors
3. Negative loads denote uplift
4. Lateral loads are applied 6'' above top of pile
5. Moment sign convention follows left hand rule when looking North (wind motion to make panels vertical when in stow is negative).

You might also like