Professional Documents
Culture Documents
EDC15P PID Maps in VAGEDC Suite
EDC15P PID Maps in VAGEDC Suite
EDC15P PID Maps in VAGEDC Suite
VAGEDC Suite
Written by : Wayne Modz
This was inspired by a post by Diesel Johnny that can be found here:
http://www.ecuconnections.com/forum/viewtopic.php?f=2&t=452
This method might not always work but if you do not have WinOLS
and this method works on your ecu, it can be very handy.
If you have WinOLS this helps you find the address ;-)
Because VAGEDC Suite uses signature bytes ,it finds a lot of maps
which it does not categorize but it does allow you to edit.
MODEL : 038906019PJ
PN : 0281015432
ASZ (130 bhp/310 Nm)
Step 1. Get the address of the boost target.
Now click address until is sorts the addresses in an ascending manor. (low to high)
Find the maps before the target
Look in this area for a 16x1 map.
PID (I) Map
Continue to next 16x1 map
PID (D) Map
Continue to next 16x1 map which should be higher than the target
PID ( P ) Map
Congratulations
You have found the three PID Controller maps