Professional Documents
Culture Documents
Model: C900 D6 Frequency: 60 HZ Fuel Type: Diesel: Generator Set Data Sheet
Model: C900 D6 Frequency: 60 HZ Fuel Type: Diesel: Generator Set Data Sheet
Model: C900 D6
Frequency: 60 Hz
Fuel type: Diesel
Standby Prime
Fuel consumption kW (kVA) kW (kVA)
Ratings 925 (1156) 835 (1044)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full
US gph 19.0 31.6 45.2 60.2 15.7 27.9 40.6 54.6
L/hr 72 120 171 228 59 106 154 207
Fuel flow
Maximum fuel flow, L/hr 570
Maximum fuel inlet restriction, mm Hg 203
Maximum fuel inlet temperature, °C 66
power.cummins.com
©2017 Cummins Inc. | DS367-CPGK (08/17)
Air Standby rating Prime rating
3
Combustion air, m /min 76.2 71.4
Maximum air cleaner restriction, kPa 6.2
Exhaust
3
Exhaust gas flow at set rated load, m /min 196.8 180.0
Exhaust gas temperature, °C 481 464
Maximum exhaust back pressure, kPa 10.1
Genset outline
Open set
Enclosed set
Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
power.cummins.com
©2017 Cummins Inc. | DS367-CPGK (08/17)
Alternator data
Connection Temp rise ºC Duty Alternator Voltage
Wye, 3-phase 150/125 S/P HC6J 380-480
Ratings definitions
Emergency Standby Limited-Time Running Prime Power (PRP): Base Load (Continuous)
Power (ESP): Power (LTP): Power (COP):
Applicable for supplying Applicable for supplying Applicable for supplying Applicable for supplying
power to varying electrical power to a constant power to varying electrical power continuously to a
load for the duration of electrical load for limited load for unlimited hours. constant electrical load for
power interruption of a hours. Limited-Time Prime Power (PRP) is in unlimited hours.
reliable utility source. Running Power (LTP) is in accordance with Continuous Power (COP)
Emergency Standby accordance with ISO ISO 8528. Ten percent is in accordance with
Power (ESP) is in 8528. overload capability is ISO 8528, ISO 3046, AS
accordance with ISO available in accordance 2789, DIN 6271 and
8528. Fuel stop power in with ISO 3046, AS 2789, BS 5514.
accordance with ISO DIN 6271 and BS 5514.
3046, AS 2789, DIN 6271
and BS 5514.
©2017 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
DS367-CPGK (08/17)