Professional Documents
Culture Documents
Dahe Handrailing
Dahe Handrailing
Dahe Handrailing
ࡍਜ਼౺ঝ!
ᆺὁ᳝䰤݀ৌ
Handrailing ࡍਜ਼౺ঝ! Ⳃ䣘
Ⳃ䣘
ࠡ㿔ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 3
⧗⃘ᴚⱘ㌤ᾟĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 4
⧗⃘ᴚⱘߚ串ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 5
⧗⃘ᴚⱘሎᇌĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 6
ᴤ᭭㸼䴶㰩⧚ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 7
ஂ⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 8
ܽ⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 9
ϝ⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 10
ಯ⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 11
ᔢ丁ǃᬊষǃ䏶㝇ᵓĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 12
ஂᄨゟ᷅ǃ䤞䭔ǃ㞾䮰䭔ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 13
ϡ䧑䣐⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 14
䢕ড়䞥⧗⃘ᴚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 15
14. ⧗⃘ᴚⱘࠊঞሎᇌأᏂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 16
⧗⃘ᴚᅝ㺱ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 17
㸠῭ޚĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 18
CONTENTS
1. FOREWORDS ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 3
2. STRUCTUREĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 4
3. CODINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 5
4. RELEVANT SIZEĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 6
5. MATERIAL AND FINISHĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 7
6. SINGLE BALL JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 8
7. TWO BALLS JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 9
8. THREE BALLS JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 10
9. FOUR BALLS JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 11
10. BENDS CLOSURES AND KICKPLATESĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 12
11. ONE SIDE DRILLED STANCHION CHAIN GATE AND SELF CLOSING GATEĂĂĂ 13
12. STAINLESS STEEL BALL JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 14
13. ALUMINUM BALL JOINT HANDRAILINGĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 15
14. MANUFACTURES AND TOLERANCESĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 16
15. INSTALLATIONĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 17
16. STANDARDSĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 18
2
Handrailing ࡍਜ਼౺ঝ! ࠡ㿔
⃘ᴚˈ
ࠡ㿔 Handrailing,
or named Guard-rails,
জ々䅋⃘ǃ⃘⊇ǃᡊˈ
)25(:25' Parapets, Balustrades,
ϔ⾡䰆ℶ✊ي䎠㨑ˈ Barriers is one security
㗙䰆ℶ✊ي䘆ܹॅ䱾औඳⱘᅝܼೡ䅋㺱㕂DŽ device for protection against accidental fall or
accidental access to a hazardous area. It is
ᅗᅝ㺱ᮐῧẃǃ䱢ẃẃ↉ᑇৄǃ᪡ᑇৄǃ
installed on stairs, step ladders or landings,
ኌ∴䙞ѩᮕˈгᅝ㺱ᮐ䗮䘧ⱘܽˈو platforms, sides of bank, pool, pit and walkways.
া㽕᳝㨑乼䱾ህឝ䁆⃘᳝ᴚDŽ The handrailing shall be installed near to the
dangerous areas where is a fall risk of passage
through.
᳝ϔ。⧗ᓣ⃘ᴚˈ
⧗ㅵ㌤ᾟⱘゟ᷅ˈ There is one type of ball joint handrail, the
ball-pipe structure stanchion, combined with rails
䜡ড়ㅵᡊǃㅵ‿ᴚǃ䏶㝇ᵓˈ and toe plates, composing the safety, beautiful
㌘៤њᅝܼ⠶䴴ǃ㕢㾔ᮍǃ and easy erection handrails -
ᅝ㺱֓᥋ⱘ⧗⃘ᴚDŽ
DAHE ball joint handrailing.
⧗⃘ᴚⱘ㌤ᵘൟᓣ
STRUCTURE OF DAHE BALL JOINT HANDRAILING
__
_
__
__
__
__
__
__
__
_
__
ᡊ TOP RAIL ‿ᴚ MID RAIL
__
_
_
__
__
__
__
__
__
_
__
__
__
__
__
__
___
㾦ᑺᬊষ ANGLE CLOSURE
4
Handrailing ࡍਜ਼౺ঝ! ⧗⃘ᴚⱘߚ串
⃘ᴚⱘߚ串
CODE OF DAHE HANDRAILING
ϔʳҹ䀁㿜㥋䓝㛑ߚ串
Classify according to designed load capability
ߚ串ৡ々 ヺ㰳 ∈ᑇ䲚Ё㥋䓝䀁㿜ؐ
Type Symbol Capable withstand concentrated load
⃘ᴚⱘൟ㰳㟝՟ (;$03/()25&2'(6˖
L 3 SB OR
-----
---------------------
----------
---------------
ൟ㰳䁾ᯢ˖
Examples:
L3SBOR----䓩ൟϝ⧗وᥠᔢ㝓েஂᄨゟ᷅˄䀁㿜∈ᑇ㥋䓝⚎ 250 N˅
Light duty three balls side mounting and bended leg and right one side drilled
stanchion (horizontal load 250N)
2PAA -------῭⑪ൟܽ⧗㾦ᑺᑩᥠ㾦ᑺᡊゟ᷅˄䀁㿜∈ᑇ㥋䓝⚎ 500 N˅
Standard duty two balls angle base and angle rails stanchion (horizontal load 500N)
H3SBAL---䞡ൟϝ⧗Ꮊووᥠᔢ㝓㾦ᑺᡊゟ᷅˄䀁㿜∈ᑇ㥋䓝⚎ 1500N˅
Hight duty left side mounting and bended leg and angle rails stanchion (horizontal
load 1500N)
5
Handrailing ࡍਜ਼౺ঝ! ⧗⃘ᴚⱘሎᇌ
⃘ᴚⱘⳌ䮰ሎᇌ
RELEVANT SIZE OF HANDRAILING
⃘ᴚሎᇌ SIZE OF HANDRAILING mm
؆உ ਪጥ؆உ ֫ݿጥ؆உ ᖩޝጥ؆உ
Ball O.D. Stanchion pipe O.D. Top rail O.D. Mid rail O.D.
68 42.3 33.5 26.8 or 33.5
75 48 33.5 or 42.3 26.8 or 33.5
85 48 or 60 42.3 33.5
95 60 48 33.5
120 75.5 60 33.5
ゟ᷅催ᑺ᷅䭧䎱 HIGHT AND SPAN mm
مਪ stanchion ᓎ䅄᳔催ᑺ hight 䀁㿜᷅䭧䎱 span
مਪ single ball 350 1000
ܽمਪ two ball 1100 1000
ϝمਪ three ball 1200 1000
ಯمਪ four ball 1500 1000
䀁㿜㥋䓝ᴤ᭭ሎᇌগ㗗ؐᴤ᭭⚎⚁㋴䣐
LOAD AND DIMENSION mm
᳔ᇣぎᖗ⧗ຕ८ ᳔ᇣ᷅ㅵຕ८ ᳔ᇣᡊㅵຕ८
䀁㿜㥋䓝
EDOOWKLFNQHVV SRVWWKLFNQHVV WRSUDLOWKLFNQHVV
ORDGFODVV
PLQ PLQ PLQ
䓩㥋䓝 light duty
῭⑪㥋䓝 standard duty
䞡㥋䓝 heavy duty
ᴀ㸼ᭌؐϡᬊ䉼ӆ㺕ձڙկগ㗗ҹ⧚䂪㿜ㅫড়Тᆺ䱯㥋䓝䀺倫ᭌ⚎⑪DŽ
The values in this table can not be used as evidence for receipt goods or arbitration. It is for reference only.
6
Handrailing ࡍਜ਼౺ঝ! ᴤ᭭㸼䴶㰩⧚
⃘ᴚ䙌⫼ⱘᴤ᭭
MATERIAL
ϔ.ʳ ⺇㋴䣐⃘ᴚ Ё῭⑪ GB700-1988 ⠠㰳 Q235A
ⓓ䎇㣅῭ޚBS4360-43Aⱘ㽕∖DŽ
Ѡ.ʳ ϡ䧑䣐⃘ᴚ (㽟 P 14 )
ϝ.ʳ 䢕ড়䞥⃘ᴚ (㽟 P 15 )
1. Mild steel -- low carbon steel is conform to Chinese standard
GB700-1998.Q235-A. and British standard BS 4360 grade 43A
2. Stainless steel as page14
3. Aluminum as page15
⺇㋴䣐⃘ᴚⱘ㸼䴶㰩⧚
FINISH
⺇㋴䣐ࠊ⧗⃘ᴚߎᒴᰖ㍧䘢➅⍌䢙㰩⧚,ヺড়GB/T 13912-2002 䞥ቀ㽚㪟ሸǃ䣐
䨉㻑ક➅⍌䢙ሸᡔ㸧㽕∖DŽ
Hot dipped galvanization's surface of treatment of the mill steel handrailing more and
more improve up the anti-rust capability and less maintenance cost, Hot dip
galvanizing conforms to standard GB/T13912 and BS EN ISO 1461:1999
7
Handrailing ࡍਜ਼౺ঝ! ஂ⧗⃘ᴚ
ஂ⧗⃘ᴚ
DAHE SINGLE BALL HANDRAILING
ஂ⧗⃘ᴚゟ᷅ S I N G L E B A L L S TA N C H I O N S
1H 1HOR 1HOL
⠚ຕᡊゟ᷅ ⠚ຕᡊ ⠚ຕᡊ
েஂᄨゟ᷅ Ꮊஂᄨゟ᷅ 1PA 1PAA
ஂ⧗ᑇᑩᥠ ஂ⧗㾦ᑺᑩᥠ
㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
BASE
ANGLE
1W 1WA 1WAA
ஂ⧗⛞ൟゟ᷅ ஂ⧗㾦ᑺᡊ ஂ⧗㾦ᑺᡊ
ゟ᷅ᑇᑩ ゟ᷅㾦ᑺᑩ
SIDE
COLLAR
8
Handrailing ࡍਜ਼౺ঝ! ܽ⧗⃘ᴚ
ܽ⧗⃘ᴚ
DAHE TWO BALLS JOINT HANDRAILING
ܽ⧗⃘ᴚゟ᷅ T W O B A L L S S TA N C H I O N S
2P 2PA 2PAA
2W 2WA 2WAA
ܽ⧗ ܽ⧗ᑩᥠ ܽ⧗㾦ᑺᑩᥠ
2C 2CA
ᑩᥠゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅ ϸ⧗ ϸ⧗⛵ᥠ ܽ ⧗㾦ᑺᡊ ܽ ⧗㾦ᑺᡊ
ϸ⧗ 䓌༫ᓣ
䓌༫ᓣゟ᷅ 㾦ᑺᡊゟ᷅ ⛞ゟ᷅ ゟ᷅ᑇᑩ ゟ᷅㾦ᑺᑩ
2S 2SAL 2SAR
2S Ꮊووᥠ েووᥠ
ϸ⧗وᥠゟ᷅
㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
2SBAL 2SBAR
2SB Ꮊووᥠᔢ㝓 েووᥠᔢ㝓
وᥠᔢ㝓ゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
9
Handrailing ࡍਜ਼౺ঝ! ϝ⧗⃘ᴚ
ϝ⧗⃘ᴚ
DAHE THREE BALLS JOINT HANDRAILING
ϝ⧗⃘ᴚゟ᷅ T H R E E B A L L S S TA N C H I O N S
3P 3PA 3PAA
3W 3WA 3WAA
ϝ⧗ ϝ⧗ᑩᥠ ϝ ⧗㾦ᑺᑩᥠ 3C 3CA
ᑩᥠゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅ ϝ⧗⛵ᥠ ϝ⧗㾦ᑺᡊ ϝ ⧗㾦ᑺᡊ
ϝ⧗ ϝ⧗ 䓌༫ᓣ ⛞ゟ᷅ ゟ᷅ᑇᑩ ゟ᷅㾦ᑺᑩ
䓌༫ᓣゟ᷅ 㾦ᑺᡊゟ᷅
3S 3SAL 3SAR
ϝ⧗وᥠゟ᷅ Ꮊووᥠ㾦ᑺᡊゟ᷅ েووᥠ
㾦ᑺᡊゟ᷅
3SBAL 3SBAR
Ꮊووᥠᔢ㝓 েووᥠᔢ㝓
3SB وᥠᔢ㝓ゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
10
Handrailing ࡍਜ਼౺ঝ! ಯ⧗⃘ᴚ
ಯ⧗⃘ᴚ
DAHE FOUR BALLS JOINT HANDRAILING
ಯ⧗⃘ᴚゟ᷅F O U R B A L L S S TA N C H I O N S
4P 4PA 4PAA
ಯ⧗ ಯ⧗ᑩᥠ ಯ ⧗㾦ᑺᑩᥠ 4W 4WA
4C 4CA 4WAA
ᑩᥠゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
ಯ⧗ ಯ ⧗⛵ᥠ ಯ ⧗㾦ᑺᡊ ಯ ⧗㾦ᑺᡊ
ಯ ⧗ 䓌༫ᓣ
䓌༫ᓣゟ᷅ 㾦ᑺᡊゟ᷅ ⛞ゟ᷅ ゟ᷅ᑇᑩ ゟ᷅㾦ᑺᑩ
4S 4SAL 4SAR
ಯ⧗وᥠゟ᷅ Ꮊووᥠ㾦ᑺᡊゟ᷅ েووᥠ
㾦ᑺᡊゟ᷅
4SBAL 4SBAR
Ꮊووᥠᔢ㝓 েووᥠᔢ㝓
4SB وᥠᔢ㝓ゟ᷅ 㾦ᑺᡊゟ᷅ 㾦ᑺᡊゟ᷅
11
Handrailing ࡍਜ਼౺ঝ! ᔢ丁ǃᬊষǃ䏶㝇ᵓ
ᔢ丁ᬊষ䏶㝇ᵓ
BENDS CLOSURES AND KICKPLATES
ᔢ丁ᬊষ B E N D S C L O S U R E S A N D J O I N E R S
90 BEND
Ⳉ㾦ᔢ丁ӏᛣ㾦ᑺᔢ丁
೧䣤䢋䞬ᅮ
HORIZONTAL
CLOSURE
∈ᑇᬊষ
ANGLE
CLOSURE
㾦ᑺᬊষ 䗷ᮍ⊩
䏶㝇ᵓ䗷ᮍ⊩
KICKPLATE MOUNTING BRACKETS
:
&
3
6
6%
:+(186('21;
12
Handrailing ࡍਜ਼౺ঝ! ஂᄨゟ᷅ǃ䤞䭔ǃ㞾䮰䭔
ஂᄨゟ᷅䤞䭔㞾䮰䭔
ONE SIDE DRILLED STANCHION CHAIN GATE AND SELF CLOSING GATE
ஂᄨゟ᷅ O N E S I D E D R I L L E D S T A N C H I O N
䤞䭔㞾䮰䭔C H A I N G A T E S E L F C L O S I N G G A T E
䤞䭔
㞾䮰䭔
SELF CLOSING GATE
13
Handrailing ࡍਜ਼౺ঝ! ϡ䧑䣐⧗⃘ᴚ
ϡ䧑䣐⧗⃘ᴚ
DAHE STAINLESS STEEL BALL JOINT HANDRAILING
ᴤ᭭ⱘ῭⑪࣪ᅌ៤ӑབϟ˖
304 series alloy chemical composition as :
Standard No Designation C Si Mn P S Ni Cr Mo
GB/T1220-1992 0Cr18Ni9 0.07 1.00 2.0 0.035 0.030 8.00~11.00 17.00~19.00
BS970 Part
304S31 0.07 1.0 2.0 0.045 0.030 8.0~11.0 17.0~19.0
1-1996
ᴤ᭭ⱘ῭⑪࣪ᅌ៤ӑབϟ˖
316 series alloy chemical composition as:
Standard No Designation C Si Mn P S Ni Cr Mo
GB/T1220-1992 0Cr17Ni12Mo2 0.08 1.00 2.00 0.035 0.030 10.00~14.00 16.00~18.50 2.00~3.00
BS970 Part
316S31 0.07 1.0 2.0 0.045 0.030 10.5~13.5 16.5~18.5 2.00~2.50
1-1996
⫶ક㸼䴶䗮ᐌ䞛⫼″Ẅᢟܝ㗙ᰃ䳏ᢟܝDŽʳ ʳ
Dahe Stainless Steel Ball Joint Handrailing products surface treatment by polishing.ʳ
14
Handrailing ࡍਜ਼౺ঝ! 䢕ড়䞥⧗⃘ᴚ
䢕ড়䞥⧗⃘ᴚ
DAHE ALUMINUM BALL JOINT HANDRAILING
䢕ড়䞥⧗⃘ᴚ䗮ᐌ䞛⫼ⱘᴤ᭭㽟䰘㸼˖
Aluminum alloy is conform to GB/T 3190-1996 and BS 1474-1987:
।૿ၺᄕ֏Ζ
Surface: Anodized to Grade AA 25 in accordance with BS 1615: 1987
15
Handrailing ࡍਜ਼౺ঝ! ⧗⃘ᴚⱘࠊঞሎᇌأᏂ
Օࡉ൷᥏ޝऱ፹֡֗܂՚ೣ
MANUFACTURES AND TOLERANCES
1 ぎᖗ⧗ Hollow Ball Horizontal closure bend is used for end of horizontal handrails,
1.1 ぎᖗ⧗ᰃ⛵㏿ⱘᭈ储៤ᔶⱘᾟӊDŽHollow ball is seamless forged connect top rail and mid rail. It is made from pipe same as the top
structure rail. The maximum tolerance of angle is 1.5e.
1.2 ぎᖗ⧗㸼䴶ᑇ⒥ˈϡ䍋Ⲏˈϡ䭟㺖ˈ༅೧ᑺ˄ⳈᕥᏂ˅ϡᮐ 0.5 mmDŽ 5.2 㾦ᑺᬊষᔢ丁, ⫼ᮐẃᄤ⃘ᴚⱘッ丁, 䗷ᡊㅵϟ‿ᴚⱘᔢ丁,
Hollow ball surface smooth, no corrugation, no crack and out of ⫼㟛ᡊㅵⳌৠⳈᕥⱘ䣐ㅵ㻑, 㾦ᑺ᳔أᏂ 1.5eDŽAngle
round (diameter tolerance) not exceed 0.5mm closure bend is used for end of stair handrails, connect top rail
2 㝇ᥠ˄ᑻᵓ˅Base Plate and mid rail. It is made from pipe same as the top rail. The
2.1 ⛞ᅮൟⱘ㝇ᥠˈ䭋ᑺᇀᑺأᏂϡᮐ 1 mmDŽFor welded fixing maximum tolerance of angel is 1.5e.
base plate, the tolerance of length and width shall be no more 5.3 Ⳉ㾦䗷ᔢ丁, ⫼ᮐ∈⑪⃘ᴚⱘᢤᔢ㰩, ߚᡊⳈ㾦ᔢ丁‿ᴚⳈ
than 1mm. 㾦ᔢ丁, ⫼㟛ᡊㅵ‿ᴚⳌৠⳈᕥⱘ䣐ㅵ㻑, 㾦ᑺ᳔أᏂ
2.2 㶎ᷧᅮൟⱘ㝇ᥠˈ㶎ᷧᅝ㺱ᄨП䭧ⱘ䭧䎱أᏂϡᮐ 1.0 mmDŽFor 1.5eDŽStandard 90e bend is used for corner connection of
bolted fixing base plate, the tolerance of space between bolt horizontal handrails, divided into top rail 90e bend and mid rail
holes shall be no more than 1mm. 90e bend, which is made from pipe same as top rail and mid rail
2.3 㝇ᥠ䷤䭟ⓣ∈ᄨDŽBase plate shall be with hole for water outlet. respectively. The maximum tolerance of angle is 1.5e.
3 ゟ᷅ㅵ Stanchion Pipe 5.4 ӏᛣ㾦䗷ᔢ丁, ⫼ᮐ∈⑪⃘ᴚⱘӏᛣ㾦ᢤᔢ㰩∈⑪⃘ᴚ㟛ẃ
3.1 ゟ᷅䭋ᑺأᏂϡᮐ 5 mmDŽThe tolerance of stanchion length shall ᄤ⃘ᴚⱘ䗷㰩, ߚᡊӏᛣ㾦ᔢ丁‿ᴚӏᛣ㾦ᔢ丁, ⫼㟛ᡊ
be no more than 5mm. ㅵ‿ᴚⳌৠⳈᕥⱘ䣐ㅵ㻑, 㾦ᑺ᳔أᏂ 1.5eDŽAngle bend is
3.2 ゟ᷅ぎᖗ⧗Ϟⱘᡊㅵᄨ,‿ᴚᄨ,ᣝ✻᠔䙌⫼ⱘᡊㅵ,‿ᴚㅵⱘ used for angle corner of horizontal handrails or connection
ᕥ݀々ሎᇌ +2 mm 䀁㕂,ᄨԡأᏂϡᮐ 1 mmDŽThe holes on between horizontal handrail and stair handrails, divided into top
the balls for rails through shall be drilled addition 2mm than rail angle bend and mid rail angle bend, which is made from pipe
nominal diameter of top rail and mid rail being used. The same as top rail and mid rail respectively. The maximum
tolerance of holes position shall be no more than 1mm. tolerance of angle is 1.5e.
4 ᡊㅵ Top Rail 5.5 ᠔᳝ᔢ丁ᔢ㻑៤ᔶᕠˈ⛵䭟㺖ǃ↯ࠎǃߚሸ, ܻ⊶و⌾ᑺϡ䍙䘢
4.1 ᡊㅵⱘ㸼䴶ឝ䁆ܝ⒥⛵↯ࠎ,⛵㉫㊭ⱘ䢙⯸,≦᳝䤡Ϟ䢙ⱘ咥᭥ 3mmDŽAll bends shall be no crack, burrs or layer after bending
≑⊵ᄬDŽTop rail surface shall be smooth, no burrs, no rough formed and the inner wavy not exceed 3mm.
dross, no uncoated black spots or bubble. 6 䏶㝇ᵓ Toe Plate
4.2 ᡊㅵП䭧ⱘ䗷,ܻ⫼ܜㅵ䗷,✊ᕠᅮぎᖗ⧗Ё,㏿ϡ 6.1 䏶㝇ᵓᑇⳈᅮሎѸ䉼DŽToe plates shall be supplied in standard
䴆DŽThe connection between top rails shall be use joiner tube and length.
then fixed inside of the ball. The joint shall not be exterior. 6.2 䏶 㝇 ᵓ ⱘ ሎ ᇌ ݀ Ꮒ ヺ ড় ᳝ 䮰 ➅ 䒟 ᐊ 䣐 㽣 ㆘ 㽕 ∖ DŽ Dimension
5 ᔢ丁 Bend tolerance of toe plates shall be in accordance with specifications
5.1 ∈⑪ᬊষᔢ丁, ⫼ᮐ∈⑪⃘ᴚⱘッ丁, 䗷ᡊㅵϟ‿ᴚⱘᔢ丁, of relevant hot rolled steel coil.
⫼㟛ᡊㅵⳌৠⳈᕥⱘ䣐ㅵ㻑, 㾦ᑺ᳔أᏂ 1.5eDŽ
16
Handrailing ࡍਜ਼౺ঝ! ⧗⃘ᴚᅝ㺱
ᅝ㺱㽕∖
INSTALLATION
1 া㽕ᄬ㨑乼䱾ህᖙ䷜ᅝ㺱⃘ᴚDŽThe handrails shall be installed in The self closing gate shall be opened easily.
the area where is a fall risk. d) 㞾䮰䭔ឝ㛑㞾ࢩ䮰䭝DŽThe self closing gate shall be closed
2 ⭊ৃ㛑㨑催ᑺ䍙䘢 500mm ᰖˈᖙ䷜ᅝ㺱⃘ᴚDŽThe handrails shall automatically.
be installed when the fall height may exceed 500mm. 7 ेՓ≦᳝㨑乼䱾, ՟བܽ䙞᳝⠚ຕⱘῧẃ, г㟇ᇥ㽕ᅝ㺱ϔوᡊ
3 བᵰ᪡ᑇ㟎䀁٭ᾟᶊ⠚ຕП䭧ⱘ䭧䎱ᇣᮐ 200mm ϺϨᾟᶊⱘ ⃘ᴚDŽᇀᑺᮐㄝᮐ 1200mm ⱘῧẃឝᅝ㺱ܽوᡊ⃘ᴚDŽEven
䰆䅋ㄝᬜᮐ⃘ᴚᰖˈϡ䳔㽕㺱⃘ᴚDŽԚᰃˈ⭊᪡ᑇ㟎Ⳍ䜄ⱘᾟ if there is no fall risk, such as stairway with two sides of wall, one
ᶊП䭧ⱘ䭧䎱ᮐ 30mm ᰖˈ㽕᳝䏶㝇ᵓDŽIf the space between side shall be installed handrail at least. While the width more or
working platform and plant structure or wall is less than 200mm equal 1200mm, both sides of stairway shall be installed handrails.
and the structures protection equal to the handrails, there is no 8 ⭊ῧẃⱘϞछ催ᑺ䍙䘢 500mm ϺϨ᭰ṕو᳝ᮐ 200mm ⱘ‿
need to install handrails. However, if the space between working 䭧䎱ᰖˈ݊و䙞ឝᅝ㺱⃘ᴚDŽWhen the up height of stairway exceeds
platform and adjacent structure is more than 30mm, there shall be 500mm and there is a cross space of over 200m outside of beam, the
installed toe plates. side of stairway shall be installed handrails.
4 ゟ᷅䭧䎱ឝ䰤ࠊ 1500mm ܻDŽབᵰ䍙䘢䗭ϔ䎱䲶ˈឝ⡍߹⊼ᛣゟ᷅ 9 ⃘ᴚᡊⱘ਼ೡ 100mm ⱘ䎱䲶ܻϡឝོ᳝⻭Ҏᡞᦵⱘ䱰⻭DŽ
ⱘᅮᔋᑺࡴᅮⱘ㺱㕂DŽThe space of stanchions shall be There shall be no obstacle holdback people in distance of 100mm
limited within 1500mm. If exceeding this space, the special note around handrails.
shall be taken fixing strength of stanchion and add fixing device. 10 ᠔᳝ゟ᷅㝇ᥠᖙ䷜㟛ᑇ㟎ṕ⠶⛞, 㾦⛞㏿ϡᕫᇣᮐ 8mmDŽAll
5 Ёᮋᡊⱘᚙ⊕ϟˈܽ↉⃘ᴚ䭧᳔⎼䭧䎱ϡឝ䍙䘢 120mm DŽབ base plates of stanchions shall be welded stably to platform
ߎ⧒ܽ↉⃘ᴚ䭧᳔⎼䭧䎱䍙䘢 120mm 㗠জϡ֓ࡴ㺱ゟ᷅ⱘᚙ beams, the fillet weld shall be no less than 8mm.
⊕, ܕ䀅ৠῷ催ᑺ⫼㟛⃘ᴚⱘᡊ‿ᴚⳌৠⱘ䣐ㅵ⛞䗷, 11 ᠔᳝ゟ᷅⧗咲ᡊㅵП䭧ǃゟ᷅⧗咲‿ᴚП䭧ⱘ䗷ᖙ䷜
✊ᕠࡴҹ䰆㜤ห㺱DŽIn the conditions of rails stopped, the maximum ⫼೧䣤䢋ᅮDŽAll connections between stanchions ball joints and
clear space between two segment handrails shall be no more than rails (top and mid) shall be fixed by taper pins.
120mm. If the maximum clear space over 120mm and the 12 ⃘ᴚᅝ㺱ᰖឝֱ䄝ᑇⳈ, ≦᳝㙝ⴐৃ㽟ⱘᯢ乃⊶⌾ᔢ᳆DŽHandrails
stanchions can not be added convenience, the welding connection installation shall be ensured straight and no visible wavy bending.
is permitted use same pipes as top rails and mid rails in the same 13 ゟ᷅ᡊㅵП䭧ǃゟ᷅‿ᴚП䭧ⱘ䗷ឝগ✻⧗⃘ᴚᡊ‿
height, then anti corrosion coating shall be carried out. ᴚᔢ丁ᅝ㺱⼎ᛣ೪ⱘ㽕∖䘆㸠, ᓎ䅄ᡞᡊㅵ‿ᴚ䗮䘢ゟ᷅⧗
6 ᠔᳝䘆ߎষˈឝᅝ㺱㞾䮰䭔DŽ㞾䮰䭔ឝ⃘᳝ᴚৠῷ催ᑺⱘᡊ 咲㌘㺱៤ᥦᕠݡᅮDŽConnections between stanchions and rails
‿ᴚ, গ㗗೪ 4.9DŽAll entrance and exit shall be installed self (top and mid) shall refer to Ball Joint Handrails – Top Rails, Mid
closing gates. The self closing gates shall be with top rails and mid Rails, Bends Installation Sketch. It is recommended that first feed
rails, the height same as handrails. Refer to Drawing 4.9. top rail and mid rail through ball joint and fit up, then fixing.
a) 㞾䮰䭔া㛑ᳱϔןᮍᠧ䭟DŽThe self closing gate only can 14 ᇡᅝ㺱ᕠⱘ⛞䚼ԡ, 㺕ߛষ, ⺄᧡᪺ڋㄝ䢙ሸ䙁ࠄ᧡ⱘڋ䚼ԡˈ㽕
be opened in single direction. ∖ ⧒ จ ᮑ Ꮉ 䘆 㸠 䰆 㜤 ห 㺱 DŽ After installation, the positions of
b) 㞾䮰䭔ⱘᠧ䭟ᮍϡឝᳱ㨑ᮍDŽThe opened direction galvanization coating destroyed due to welding, cutting,
of the self closing gate shall not toward to fall direction. scratching shall be carried out anti-corrosion coating on site.
c) 㞾䮰䭔ឝ㛑ᕜᆍᯧᠧ䭟DŽ
17
Handrailing ࡍਜ਼౺ঝ! 㸠῭ޚ
⃘ᴚ㸠῭⑪
STANDARDS
GB 4053.3-1993 ᅮᓣᎹὁ䰆䅋ᴚᅝܼᡔ㸧ṱӊ GB4053.3-93 ᅮᓣᎹὁ䰆䅋⃘ᴚᅝܼᡔ㸧ṱӊ˖
GB 17888.3-1999 ″Ẅᅝܼ 䘆ܹ″఼Ꮉὁ䀁ⱘ٭ GB4053.3-93 Fixed Industrial Protection Handrails – Safety
ᅮ䀁ᮑ 3 䚼ߚ:ῧẃǃ䱢ẃ䅋⃘ Technical Conditions
GB 5009-2001 ᓎ㆝㌤ᾟ㥋䓝㽣㣗 5. ᔋᑺ㽕∖ ⃘ᴚⱘ䀁㿜ˈᖙ䷜ֱ䀐݊ᡊ᠔㛑ᡓফ∈ᑇᮍൖⳈᮑࡴⱘ
䓝㥋ϡᇣѢ 500N/mDŽ
GB 4053.3-1993 Fixed Industrial Protection
5. Intensity requirement Handrails shall be designed to withstand a
Handrails - Safety Technical Conditions vertical load of no less than 500N/m applied in horizontal direction
GB 17888.3-1999 Safety of machinery Permanent
GB 17888.3-1999ǃ ISO14122.3-2001 ″Ẅᅝܼ 䘆ܹ″఼Ꮉ
means of access to machines and industrial plants
ὁ䀁ⱘ٭ᅮ䀁ᮑ 3 䚼ߚ:ῧẃǃ䱢ẃ䅋⃘˖
Part 3˖Stairwaysˈstepladders and guard-rails
GB 17888.3-1999, ISO14122.3-2001 Safety of machinery
GB 5009-2001 Loading of Building
Permanent means of access to machines and industrial plants
ISO 14122-3-2001 Safety of machinery Permanent
means of access to machines and industrial plants Part 3˖Stairwaysˈstepladders and guard-rails
7.3. ᔋᑺ߸ 䅋⃘ឝᬃᩤᕫ⊓ᡊ᳔ϡ߽㰩ᮑࡴѢㄝѢ Fmin ⱘ‿
Part 3˖Stairwaysˈstepladders and guard-rails
䓝㥋㗠≦᳝∌Й䅞ᔶˈϺϨ᳔ᩧᑺϡ䍙䘢 30mm
BS 6399-1:1996 Loading of Building Part:1 Dead and
Fmin=300N/m x L
imposed loads L ᰃⳌ䜄ܽᬃ᷅䓌㎮䭧᳔䎱⾏DŽ
BS 6180:1995 Barriers in and about buildings 7.3 Intensity Criterion Handrails shall be capable of with standing
AS 1657:1992 Fixed platforms, walkways, stairways horizontal load of Fmin or more applied in the most disadvantage point.
and ladders-Design, construction and installation Under this load, there shall be no permanent distortion and the max.
ANSI/NAAMM AMP521-2001 Pipe Railing Systems deflection not exceed 30mm.
Manual Including Round Table Fmin=300N/m x L
L indicates the max. space between adjacent two stanchions axis
᳝䮰῭⑪ᇡ⃘ᴚ㥋䓝ⱘ㽣ᅮ
ANSI/NAAMM AMP 521-2001 Pipe Railing Systems Manual
SPECIFICATIONS OF STANDARDS FOR Including Round Table
HANDRAILS LOADS Handrails: Capable of withstanding following loads applied as
GB5009-2001 ᓎ㆝㌤ᾟ㥋䓝㽣㣗: indicated.
GB5009-2001 Loading of Building a. Concentrated load of 200 pounds applied at any point in any
4.5.2 ῧẃǃⳟৄǃ䱑ৄϞҎሟ䴶ㄝⱘ⃘ᴚ䷖䚼∈ᑇ㥋䓝ឝ direction.
ᣝϟ߫㽣ᅮ䞚⫼˖ b. Uniform load of 50 PLF applied in any direction.
c. Concentrated and uniform loads above need not be applied
4.5.2 Stairways, landings, balconies and roofs etc.
simultaneously.
Top horizontal loads on handrails shall be applied as
following: AS 1657:1992 Fixed platforms, walkways, stairways and
1. ԣᅙǃᆓ㟡ǃ䕺݀ῧǃᮙ仼ǃ䝿䰶ǃᠬܦ᠔ǃᑐܦ೦ˈឝ ladders-Design, construction and installation
প 0.5kN/m˗ Loads on Handrails. Each handrail shall be designed to withstand each
of the following loads acting separately:
1. Dwelling house, lodging house, office, hotel, hospital,
nursery, shall be 0.5kN/m ˄a˅A horizontal force of 550N applied outward at the centre of the
2. ᅌ᷵ǃ亳ූǃ࡛จǃ䳏ᕅ䰶ǃ䒞キǃ⾂ූǃሩ㾑仼储㚆 span.
˄b˅A vertical force of 550N applied downward at the centre of the
จˈឝপ 1.0kN/mDŽ
span.
2. School, dining hall, theatre, cinema, station, auditorium,
exhibition hall or sports ground, shall be 1.0kN/m
18
Handrailing ࡍਜ਼౺ঝ! 䖥ᳳᎹ
佭␃Ꮉ ܻᎹ
Some projects in Hong Kong Some projects in local
ᇣ▴☷∵∈ᒴ ⥝⪄ⱐ䳏ᒴ
Siu Ho Wan Sewage Treatment Plant Yuhuan Power Plant
≭⬄∵∈ᒴ 䛦㏷ⱐ䳏ᒴ
Shatin Wan Sewage Treatment Plant Zhouxian Power Plant
ඨ◒∈ᒴ ⋄Ꮂⱐ䳏ᒴ
Taipo Water Treatment Plant Taizhou Power Plant
ᯖ㠍⌆‟ ᚴ՚ⱐ䳏ᒴ
Stonecutters Bridge Huilai Power Plant
݊ᅗ⫶કⱘ䁾ᯢৃ݀ৌ䢋ଂ䚼䭔㋶প
FOR DAHE OTHER PRODUCTS CATALOG,
P LEASE ASK FOR OUR SALES DEPT.
19
ᆺὁ᳝䰤݀ৌ