Professional Documents
Culture Documents
Additional Terms
Additional Terms
curve called:
a. Rayleigh line
b. Cutting line
c. Freh line
d. Fair line
What process is employed when the turbine steam power plants experience excessive moisture?
a. subcooling
b. supercooling
c. freezing
d. reheating
In order to increase the gas velocity gas turbines generally have fixed nozzles. This is allow the:
a. Evaporation of gases
b. Condensation of gases
c. Expansion of gases
d. Compression of gase
a. fuel switching
b. fuel binding
c. fuel swapping
d. fuel adding
The matching of scale model and full scale results for a fluid dynamic phenomena with a free surface
requires equality of:
a. Froude number
b. Cauchy number
c. Reynolds number
d. Weber number
A chemical method of feedwater treatment which uses calcium hydroxide and sodium carbonate as
reagents
a. Thermal treatment
d. Demineralization process
An opening in lava or in volcanic area through which steam and other hot gases are escaping into the air
is called:
a. Volcanic leaks
a. Otto cycle
b. Carnot cycle
c. Dual cycle
d. Brayton cycle
The ratio of energy absorbed by the transfer fluid to the original incident energy striking the collector.
a. Collector efficien
a. Fire point
b. Pour point
c. Flash point
d. Viscosity
a. 2
b. 3
c. 4
d. 1
When r is the compression ratio, the efficiency of brayton cycle is given by:
a. 1-1/rk-1
b. 1-1/rk
c. 1-1/r
d. 1-1/r(k-1)/k
or back pressure valves, abrupt changes in fluid properties occur in a very thin section of converging –
diverging nozzle under supersonic flow conditions, creating
a. Sound wave
b. Tidal wave
c. Shock wave
d. None of these