Professional Documents
Culture Documents
Scheme of Work Science Stage 8 - 2018 - tcm143-353967
Scheme of Work Science Stage 8 - 2018 - tcm143-353967
Show learners a diagram of the basic structure of a leaf. Ask Diagram of the cross-section of
learners to discuss: a leaf.
Which cells have chloroplasts?
How does carbon dioxide get to these cells?
How does water get to these cells?
How does light get to these cells?
Learners then discuss which cells they think will do the most
photosynthesis and how they are adapted for this process.
Then learners discuss:
Learning Objective Suggested activities /projects Resources Assessment
Explore how plants Show learners the word equation for photosynthesis again:
need carbon dioxide,
water and light for light
photosynthesis in carbon dioxide + water chloroplasts biomass + oxygen
order to make →
biomass and oxygen
Ask learners: How could you prove that plants require water and
Make predictions light?
using scientific Note: learners will probably have conducted investigations on
knowledge and growing plants in light/dark and with/without water in earlier
understanding stages. These investigations can be referred to, but do not need
to be repeated here.
Take appropriately
accurate Oxygen production
measurements Ask learners to suggest how they could demonstrate that plants
produce oxygen when they photosynthesise. Elicit that it is
Use a range of normally difficult to see the oxygen being produced because it is
equipment correctly a colourless gas.
ching-resources/235-student-
Learners test the effect of placing the balls in different levels of sheet-23-photosynthesis-using-
light intensity and: algae-wrapped-in-jelly-balls
predict the effect of changing the light intensity, using the
word equation for photosynthesis to explain their prediction
collect results in a table
identify a trend in their results
compare their results with their predictions
explain their results using scientific knowledge.
Explore how plants Again, elicit the word equation for photosynthesis: This investigation is
need carbon dioxide, a classic of
water and light for light secondary school
photosynthesis in carbon dioxide + water chloroplasts biomass + oxygen biology. However, it
order to make → involves many
biomass and oxygen stages and it can be
The leaf starch test complicated for
Make predictions Scientific Enquiry activity Method for activity: learners to
using scientific The leaf starch test is a multi-stage process which allows www.saps.org.uk/secondary/tea understand and
knowledge and learners to demonstrate that there is starch in the leaf. In order ching-resources/1222- interpret the results.
understanding to understand the investigation, explain that starch is one of the photosynthesis-testing-a- Keep referring back
main examples of ‘biomass’ produced in photosynthesis. variegated-leaf-for-starch to the word equation
Use a range of for photosynthesis to
equipment correctly Before conducting any investigations teach learners the leaf (for this first attempt, do not use provide a scaffold for
starch test and allow them to practise. a variegated leaf). understanding the
Discuss and control investigation.
risks to themselves Several methods are available. In brief, the waxy coating on the It is better to
and others leaf is removed by boiling in water. Next the green pigment is investigate light/dark
removed from the leaf by immersing it in ethanol. Then it is and variegated
Compare results possible to test the leaf for starch using iodine solution. leaves as two
Learning Objective Suggested activities /projects Resources Assessment
Ask learners to define the word ‘diet’. Explain that the scientific
term ‘diet’ means the food that an organism regularly eats
(rather than a way to lose weight).
Learners collect and study food labels from packaging to Food labels showing nutritional
discover how foodstuffs are divided into carbohydrates, proteins, information from common food
fats, vitamins and minerals. items.
They compare the protein, sugar, fat, fibre and salt content
of foods with the recommended daily intake for adults. (It is
difficult to find recommended daily intake values for
adolescents.)
What combinations of food would give you the
recommended daily intake of protein and fibre?
What is the maximum number of snacks you could eat
before you had more than the recommended daily intake of
sugar and fat?
Learners identify the foods with the highest energy content
Learning Objective Suggested activities /projects Resources Assessment
Learners often
confuse the Biuret
test with the
Benedict’s test
Identify the Describe the main functions of each of the main nutrients:
constituents of a protein is used for growth and repair
balanced diet and fats store energy
the functions of carbohydrates (sugar and starch) provide an energy source.
various nutrients. Ask learners to suggest other components of a healthy diet.
Secondary sources
can be used Give groups of learners a part of the diet to research using Secondary sources
Learning Objective Suggested activities /projects Resources Assessment
secondary sources. They should find out about its function and
Understand the the problems that occur when there is not enough of it in the
effects of nutritional diet. These problems can include changes in growth, behaviour
deficiencies and health.
Suggested topics include:
Understand the vitamin A
relationship between vitamin C
diet and fitness vitamin D
iron
calcium
Interpret data from fibre
secondary sources
water.
Discuss how
Learners present their findings to each other. All learners should
conception, growth,
make a table that summarises the main point on each topic.
development,
behaviour and
Working in pairs, learners take it in turns to describe the
health can be
symptoms they would have if they had a nutritional deficiency.
affected by diet,
Their partner needs to identify the nutritional deficiency they
drugs and disease
have.
Understand the Ask learners to chew a piece of bread for a few minutes and Small piece of bread for each Health and safety:
function of enzymes notice the changes that take place. Ask: Why does food need to learner. Be aware of allergies
as biological be chewed? What gets added to the bread as it is chewed? and intolerances.
catalysts in breaking What do you notice about the taste of the bread between the
down food to simple start and end of chewing?
chemicals
Explain to learners that a chemical change is occurring in the
Discuss the mouth as well as the food being broken up by the teeth and the
importance of chewing process. Use diagrams to show that large molecules of
Learning Objective Suggested activities /projects Resources Assessment
Understand the represents chewing or mastication. Elicit the idea that there spoon, funnel, tube, clear plastic
function of enzymes are enzymes in the saliva. bag, malt vinegar, nylon
as biological Pour the mixture through a funnel attached to a tube that stocking/tights, string,
catalysts in breaking leads to a clear plastic bag containing malt vinegar. Show tray/newspaper, scissors, tea
down food to simple peristalsis by squeezing the food down the tube. towel.
chemicals Squeeze the bag to show the action of the stomach
churning the food with the stomach acid (represented by the
malt vinegar). Explain that the chemicals in the food are
being digested. Explain that there are enzymes in the
stomach as well as acid.
Use a nylon stocking (or tights) with string tied around it
about half-way down to stop the food. Pour the mixed up
food into the stocking. Do this over a tray or lots of
newspaper to collect the liquid containing the digested food
that is being absorbed into the body. (There are more
digestive enzymes in the small intestine.)
Cut the string. Move the mixture of food by peristalsis into
the lower parts at the bottom of the stocking. Squeeze as
much of the liquid out of the stocking as possible. This
shows the water being absorbed in the large intestine. By
wrapping the tights in a tea towel, more water can be
absorbed.
Cut the end of the tights to create an anus. Squeeze the
solid waste onto the tray or newspaper to represent
defecation (removal of faeces) and egestion (removing
undigested waste) from the body.
In this unit, learners build on their previous knowledge of the particle theory of matter and how this can explain the properties of solids, liquids and
gases, to develop their knowledge of:
changes of state, gas pressure and diffusion.
the chemical symbols for the first twenty elements of the Periodic Table
elements, compounds and mixtures.
2. Diffusion in liquids: Take a 250ml beaker and fill it with water. potassium manganate (VII) Emphasise to
Place a wide drinking straw at the bottom of the beaker trying to crystals, water, beakers, wide learners that any
disturb the water as little as possible. Carefully, with forceps drinking straw strongly-coloured
place one crystal of potassium manganate (VII) into the top of substance could be
the straw and let it fall to the bottom of the beaker. Very used and the exact
carefully, remove the straw and observe how the strong purple nature of the
colour diffuses throughout the water. potassium
manganate (VII) is
Learners explain diffusion in terms of particles spreading out not important to the
and mixing. activity.
8Cp3 Understand that Discuss with learners what ‘stuff’ is made of: The chair is made
elements are made of…
of atoms For the examples they give e.g. steel, wood, talk about how they
are materials but they are also made of ‘stuff’ – What is the
absolute smallest thing we can break all matter down into? If
you kept cutting and cutting, and could zoom in enough you
would get to an atom.
Is there one atom? Is all matter made of one atom? No we have
lots of variety around us and there are many atoms, but there
are only a set number of different types of atoms arranged in
uncountable patterns – those basic building blocks are
‘elements’ and are represented in the Periodic Table.
8Cp2 Give chemical Provide sealed containers or photographs of the first 20 Sealed samples or photographs All the colourless
symbols for the first elements of the Periodic Table. Learners describe each element of the first 20 elements of the gases can be sealed
twenty elements of in a sentence, e.g. ‘Hydrogen is a colourless gas’ and write the Periodic Table. containers of air, but
the Periodic Table chemical symbol for it. www.rsc.org/periodic-table treated as if they
Learners should ensure that the first letter of a chemical symbol contain the intended
is a capital and if there is a second letter in the symbol, it must element.
be written in lower case. Elements not
available or too
In the first twenty chemical symbols, two do not match with their dangerous to be
standard name: included can be
Potassium is represented with ‘K’, not a P or Po. Highlight provided as a
that ‘P’ couldn’t be used because it was already used for photograph instead.
phosphorus (discovered in 1669), and discuss the history of
Potassium. ‘K’ comes from kalium, the medieval latin for Hydrogen gas is a
potash (a potassium salt). In 1807, Humphry Davy exposed molecule made of
moist potash to an electric current and derived the metal he two hydrogen atoms.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
called potassium. It was called potassium (from potash) and Some elements exist
kept the K symbol from kalium. as molecules and
Sodium is represented with ‘Na’, not S or So. In the same have different
series of experiments in 1807, Humphry Davy exposed properties to a single
caustic soda (sodium hydroxide), which was mainly obtained atom of the element.
from the Natron Valley in Egypt, to an electric current and At this stage that
derived the metal in it. It was called sodium (from soda) and isn’t an issue and
kept the Na symbol to relate to natrium, the latin name, and describing the
the connection to Natron Valley. properties of the
molecules is
The first twenty symbols must be learnt; learners can test each acceptable.
other as a team game. For example:
‘my symbol is the end of my footwear’
Answer: ‘sock’ = K = potassium
‘my symbol is a lot of water and a note’
Answer: ‘sea’ = C and ‘a’ = calcium
8Cp6 Distinguish between Recap on the differences between elements, mixtures and Health and safety:
elements, compounds from previous activities. Sparkler. Safety goggles
compounds and must be worn.
mixtures Start by burning a sparkler. Can you explain what is happening? Magnesium ribbon, matches, The sparkler
What is burning? What type of change is burning? tongs. must be safely
8Cc1 Use a word equation extinguished by
to describe a Demonstrate the formation of simple compounds. Show simple https://youtu.be/m2i9jLPXprQ – plunging into cold
common reaction. combinations of elements, e.g. burning magnesium or steel burning magnesium (0:20 – water.
Secondary sources wool in air/oxygen. Alternatively, show videos. 1:30) Make sure that
can be used. What happened in each reaction? Discuss that magnesium the sparkler is
combined with oxygen to give magnesium oxide. https://youtu.be/TkE1uVjrY0w– used safely to
iron and oxygen avoid burns or
Demonstrate how to draw particle diagrams of one of the fires.
reactions using different colours to represent atoms of different https://youtu.be/IzkfNIG5LvE– Eye protection
elements. Learners use the same approach for several phosphorus and oxygen must be worn.
reactions. Warn learners
Learners write word equations for the reactions that were https://youtu.be/tbPxwDiX1NU– not to look
observed. sodium and chlorine directly at the
bright light of
Conclude that compounds are substances that contain two or magnesium
more different types of atoms. burning.
8Cp6 Distinguish between Scientific Enquiry activity Mixtures to separate (e.g. sand It is possible that
elements, Plan and carry out the preparation of clean dry samples of one and sugar, broken china and learners may have
compounds and or both constituents from a mixture, e.g. sand and sugar, sand sugar, soil and water, sugar and considered the
mixtures and salt, powdered chalk and copper sulfate, sugar and broken water, salt and sand, salt and separation of some
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
china. water, powdered chalk and of these substances
8Ep4 Plan investigations copper sulfate), water, beakers, before.
to test ideas Before starting their plan learners should assess the risks to conical flask, stirring rods, filter Nevertheless, good
themselves and to other learners in the class and suggest funnels, filter paper. planning and
8Eo2 Use a range of appropriate safety procedures. practical technique
equipment correctly For a sand and salt mixture: should be
Conclude that mixtures can be easily separated into pure www.rsc.org/learn- concentrated on.
8Eo3 Discuss and control substances. The constituents of a mixture are not held together chemistry/content/filerepository/
risks to themselves by chemical bonds. CMP/00/000/455/CCE-1-
and others SeparatingASandAndSaltMixtur
e.pdf
Unit 8.3 Light
It is recommended that this unit takes approximately 34% of the teaching time for this term.
In this unit, learners build on their previous knowledge of different types of energy and energy transfers to develop their knowledge of:
how light travels and the formation of shadows
how non-luminous objects are seen
reflection at a plane surface and using the law of reflection
refraction at the boundary between air and glass or air and water
the dispersion of white light
colour addition and subtraction, and the absorption and reflection of coloured light.
8Ec6 Discuss Distribute or show pictures of luminous and non-luminous Pictures of luminous and non-
explanations for objects. Ask pairs of learners to put them into groups. Each pair luminous objects (e.g. the sun,
results using then explains how they grouped the objects. car headlight, human face,
scientific knowledge If learners have not already done so, ask them to group the reflective road sign, Earth as
and understanding. items by how we see them. seen from space, lit candle,
Communicate these moon, fire, shiny surface, pond,
clearly to others mirror, white building, black (or
dark) building, fluorescent safety
vest, luminous object).
Learners may have previously used ‘black boxes’ to investigate Black boxes made from shoe
the requirement of light to see objects in stage 5. This learning boxes (or similar). Put two small
can be revised here, if necessary by using the boxes again. holes eye-width apart on one
side of the box and cut a hole
for a torch in the top of the box.
Finally, paint the inside of the
box black.
Luminous sources of light (e.g.
Show learners some luminous sources of light, e.g. lit candle or candle, match, torch, luminous
torch. How is it possible to see them? sign or watch).
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Non-luminous objects (e.g.
paper, clothing, ball, chair,
Show learners some non-luminous objects How do we see mirror).
objects which are not luminous?
8Pl1 Use light travelling in Learners make and use a pinhole camera. A simple box can be A cardboard box, e.g. a shoe Diagrams with light
a straight line to made light-tight and have a pinhole in the centre of a sheet of box, black paper, greaseproof rays should be used
explain the formation black paper at one end and a greaseproof paper screen at the paper, pin, light source (such as to show why the
of shadows and other. a candle). image is inverted.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
other phenomena Optional: film. It is possible to take
Learners point the hole towards a fairly bright light source and pictures with such a
8Eo2 Use a range of observe the image produced (size, colour, and orientation). http://drhsphotography.weebly.c simple device. The
equipment correctly om/uploads/1/4/9/7/14971336/4 screen is replaced
With assistance, learners draw a ray diagram to explain their 090764_orig.gif with a piece of film
8Ec6 Discuss observations. Introduce the terms ‘inverted’ and ‘upright’. which can be
explanations for www.instructables.com/id/Shoeb developed to give a
results using Conclude that pinhole cameras create an upside down ox-Camera/ negative. A trial run
scientific knowledge (inverted) image. Ray diagrams can be used to explain why this is necessary to
and understanding. happens. estimate time of
Communicate these exposure.
clearly to others
8Pl3 Describe reflection Discuss under which circumstances you are able to see
at a plane surface reflections clearly and from which surfaces.
and use the law of
reflection Scientific Enquiry activity
Demonstrate how to accurately record the path of a ray of light Plane mirror, thick cardboard or
8Eo1 Take appropriately as it reflects from a plane mirror using pins. Introduce the idea of corkboard, white paper, optical
accurate the ‘normal line’. Then show how to use a protractor to measure pins, protractor, ruler.
measurements the angle of incidence and the angle of reflection. The method is explained at:
www.youtube.com/watch?
8Eo2 Use a range of Learners, in groups, measure the angle of incidence and the v=PF4_liKm-WQ
equipment correctly angle of reflection for a wide variety of angles. They should Alternatively, ray boxes can be
record their results in a table and they may also plot a graph. used if available.
8Ec2 Identify trends and If done accurately, these results should demonstrate the law of
patterns in results reflection. This explains the theory clearly:
(correlations) www.bbc.co.uk/schools/gcsebite
Conclusion – formally explain the law of reflection as: size/science/ocr_gateway/home
Discuss angle of incidence = angle of reflection. _energy/introduction_to_wavesr
8Ec6 explanations for ev4.shtml
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
results using
scientific knowledge Demonstrate that when you throw (or kick) a ball against a flat Football, flat wall.
and understanding wall it is easy to predict the direction it will take afterwards. Ask
Communicate these for a volunteer to help you demonstrate this by standing in the
clearly to others correct place to catch the ball. Elicit the idea that this is
essentially the law of reflection.
Suggested link:
Show a photograph of Pepper’s ghost. http://entertainmentdesigner.co
Learners discuss and suggest ideas about how Pepper’s ghost m/history-of-theme-parks/the-
is done. enduring-illusion-of-peppers-
ghost
Demonstrate a version of Pepper’s ghost using two candles and
a vertical piece of glass. Try activities such as: Candles, glass.
blowing out one of the candles and relighting www.thenakedscientists.com/HT
placing the unlit candle in a glass and filling the glass with ML/experiments/exp/peppers-
water. ghost/
8Pl4 Investigate refraction Show the effect of refraction using one of more of these Emphasise that light
at the boundary demonstrations. travels in straight
between air and lines, but the rays
glass or air and The bending pencil. may change
water Fill three identical glasses with different amounts of water. Then Three clear identical drinking direction. The phrase
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
put a pencil in each glass of water and learners make careful glasses, three pencils or straws, ‘bending light’ can
Take appropriately observations, drawing what they see. The pencils can be moved water. cause some learners
8Eo1 accurate from one side of glass to another. to think that the rays
measurements of light are curved.
The disappearing coin trick.
Use a range of Put a coin into the bottom of an empty glass. Slowly add water Coin, glass, water.
8Eo2 equipment correctly and watch the apparent position of the coin as the water level
rises.
Identify trends and
8Ec2 patterns in results Investigating the law of refraction
(correlations) Scientific Enquiry activity
Demonstrate how to accurately record the path of a ray of Plane mirror, thick cardboard or
Discuss light as it enters and exits a rectangular block. This can be corkboard, white paper, optical
8Ec6 explanations for done with optical pins (as in the reflection investigations). pins, protractor, ruler, graph
results using Show how to find the normal line for the point of entry and paper.
scientific knowledge exit. Then show how to use a protractor to measure the The method is explained at:
and understanding. angle of incidence and the angle of refraction at the entry www.youtube.com/watch?
Communicate these and exit point. v=KuCUaE6e1Oo
clearly to others Learners, in groups, draw the path of the light as it enters Alternatively, ray boxes can be
and exits a block. They should do this for several angles of used if available.
incidence. It may help to darken the room.
They measure the angle of incidence and the angle of
refraction for a ray of light as it enters and leaves a block.
They should record their results in a table and draw a graph
of their results.
Diagrams should be
If done accurately, these results should demonstrate that the used to show the
angle of refraction is less than the angle of incidence when the directions of the rays
ray of light enters the block. The angle of refraction is greater of light.
than the angle of incidence when the ray of light leaves the
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
block.
Simulation:
Alternatively, a simulation can be used to investigate refraction. https://phet.colorado.edu/en/sim
Again results should be recorded in a table and a graph drawn. ulation/bending-light
8Pl5 Explain the Learners use a prism and shine a ray of light towards it. They Triangular glass or Perspex® Diagrams should be
dispersion of white describe what they see. They should observe that the white light prisms, light ray boxes, white used to show the
light (after refraction) causes a spectrum of colours: red, orange, paper. directions of the rays
yellow, green, blue, indigo and violet. This is called ‘dispersion’. of light through the
8Eo4 Present results as This video shows the process of prism.
appropriate in tables Ask learners to explain what this shows about white light. dispersion (learners do not need
and graphs to understand the full scientific
Conclude that white light is a mixture of colours. A prism can explanation given):
8Ec2 Identify trends and refract white light and disperse it into its constituent colours. The www.youtube.com/watch?
patterns in results spectrum of colours produced by dispersion is: red, orange, v=Aggi0g67uXM
(correlations) yellow, green, blue, indigo and violet.
8Ec6 Discuss
explanations for
results using
scientific knowledge
and understanding.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Communicate these
clearly to others
8Pl6 Explain colour The primary and secondary colours of light and colour addition https://youtu.be/wFdmNom9xm Use the first activities
addition and Show video clip of a laser light show. Ask learners to write down E (00:06–00:55 is sufficient.) to elicit prior
subtraction, and the a list of all the colours they see. knowledge about the
absorption and primary colours of
reflection of coloured Ask learners to write down the primary colours. How are other Note: it is likely that learners will paint.
light colours made? give the primary colours of paint.
8Ec6 Discuss Explain that only three colours of lights were used. What colours
explanations for do you think were used? Where do you think the others colours
results using come from?
scientific knowledge
and understanding. Use a magnifying glass to show the pixels on a television or
Communicate these computer screen. Elicit that these are red, blue and green
clearly to others instead of red, blue and yellow. Health and safety:
Care must be taken
Scientific Enquiry activity when working in a
Learners investigate practically what happens when red, green Different coloured filters (red, darkened room.
and blue lights are mixed. They can make a Venn diagram to green and blue), light ray boxes Laser pointers must
record their results. Explain that this is called ‘colour addition’. or pencil torches, white paper. not be used as a
light source.
Alternatively, learners can mix colours of light with a simulation. https://phet.colorado.edu/sims/ht
ml/color-vision/latest/color- Care is needed to
Learners compare their results with those in a textbook or vision_en.html make the distinction
online. Ensure learners know the names of all the primary and (Use ‘RGB bulbs’) between colour
secondary colours of light. addition (i.e. a light
This link shows the expected effect) as opposed to
Conclude that the primary colours of light can be combined to Venn diagram: mixing paints (a
produce the secondary colours of light. Green and red light www.bbc.co.uk/education/guide complex effect of the
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
make yellow; blue and red light make magenta; and blue and s/zq7thyc/revision/6 material involving
green light make cyan. Blue, red and green light make white colour absorption
light. This is called colour addition. and reflection).
8Pl6 Explain colour Filters and colour subtraction Health and safety:
addition and Learners investigate the effects of passing white light through Different coloured filters (red, Care must be taken
subtraction, and the red, green and blue filters. green and blue), light ray boxes when working in a
absorption and or pencil torches, white paper. darkened room.
reflection of coloured For each filter, learners draw a diagram. It is helpful if they Laser pointers must
light annotate the white light to remind themselves that it contains all This simulation can be used not be used as a
the colours in the spectrum. They should identify the colours https://phet.colorado.edu/sims/ht light source.
8Ep2 Test predictions with that each filter absorbs and transmits. ml/color-vision/latest/color-
reference to vision_en.html
evidence gained Introduce the term ‘colour subtraction’. Explain that objects (Use ‘single bulb’ with the filter
(such as filters) subtract all the colours that they do not transmit. on.)
8Ec3 Compare results This means that the transmitted light is dimmer than the light
with predictions without a filter. Useful supporting references:
http://maggiesscienceconnectio
8Ec6 Discuss Ask: What colours of light would pass through a magenta filter? n.weebly.com/visible-light--
explanations for Ask learners to draw a diagram that explains this result. color.html
results using http://hyperphysics.phy-
scientific knowledge Ask learners to predict what happens if two filters of different astr.gsu.edu/hbase/vision/filter.h
and understanding. colours are used at the same time. Demonstrate that no light tml
Communicate these passes through the second filter.
clearly to others Possible examples of colour
Learners can summarise colour subtraction by observing some subtraction:
demonstrations and creating a Venn diagram. www.youtube.com/watch?
v=SUNj3q8CEY0
Learners draw a diagram that explains this effect using www.youtube.com/watch?
annotations. v=zWS4-OvbpR0 (especially
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
0:50–0:56)
8Pl2 Describe how non- Absorption and reflection Health and safety:
luminous objects are Scientific Enquiry activity Care must be
seen Learners investigate shining different-coloured lights onto Different-coloured filters (red, taken when
different-coloured objects or pieces of paper (use white, red, green and blue), light ray boxes working in a
8Pl6 Explain colour green and blue). or pencil torches, white paper. darkened room.
addition and Learners shine white light onto the different-coloured objects Laser pointers
subtraction, and the and observe the effect. must not be used
absorption and They shine red, green and blue light onto the different as a light source.
reflection of coloured coloured objects and observe the effect.
light They shine secondary colours of light (made by colour
addition) onto the different coloured objects and observe the
8Ep2 Test predictions with effect. In a well-darkened room, the shapes light up or
reference to disappear.
evidence gained Learners draw annotated diagrams to explain the results.
Ensure learners use the terms ‘absorb’ and ‘reflect’ in their
8Ec3 Compare results explanations.
with predictions
By using a combination of coloured pens and coloured lights,
8Ec6 Discuss learners can write a message which has a different meaning Coloured pens, different
explanations for depending on the colour of light falling on it. coloured filters (red, green and
results using blue), light ray boxes or pencil
scientific knowledge Conclude that white surfaces reflect all colours. Primary- torches, white paper.
and understanding. coloured surfaces absorb other colours but reflect their primary
Communicate these colour. Secondary-coloured surfaces (e.g. yellow) reflect their
clearly to others primary colours (e.g. green and red).
Extension activity
Learners who require more challenge use colour subtraction,
the absorption and reflection of light to explain the effects of
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
mixing paints.
Unit 8.4 Transport in plants and animals
It is recommended that this unit takes approximately 33% of the teaching time for this term.
In this unit, learners build on their previous knowledge of the characteristics of living things to develop their knowledge of:
how water and mineral salts are absorbed and transported in flowering plants.
They also develop their knowledge of transporting chemicals in humans by finding out about:
the basic components of the circulatory system and their functions
the basic components of the respiratory system and their functions
gaseous exchange
the effects of smoking
aerobic respiration.
8Bp2 Describe the Ask learners: How can water absorbed through the roots of a Capillary action is
absorption and plant reach the leaves? enough to move
transport of water Then demonstrate what happens when thin (capillary tubes) are Open glass (capillary) tubes of water small
and mineral salts in placed in coloured water to show that water will rise up very thin different diameters. distances up a stem.
flowering plants tubes. However, the liquid
water is also drawn
8Eo2 Use a range of Scientific Enquiry activity up the stem when
equipment correctly Explain to learners that they are going to try to find thin tubes in Stalks of celery or some other water vapour exits
plant stems for the water to travel in. light-coloured stem, water- the leaves.
soluble dye (e.g. eosin or food
Learners, in groups, cut transverse sections through a celery colouring), white tiles, scalpels Health and safety:
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
stem that has been previously left in water containing a dye. and hand lenses. Learners should take
Learners can try pulling the vessels from the length of the stalk. Suitable slides, microscope. appropriate care
using scalpels.
Discuss the idea that there are special, hollow vessels, called
‘xylem’ that carry water and dissolved minerals from roots to
leaves. These form the woody part of a plant. The mineral salts
travel in the water.
8Bh5 Recognise and Use either dissection or diagrams to explain the anatomy of the
model the basic mammalian heart.
components of the Health and safety:
circulatory system Demonstrate the dissection of a heart (sheep or cow). The key Animal heart e.g. sheep or cow, When dissecting a
and know their stages of the dissection are: dissecting board or plate/tray, heart, be aware of
functions Show the coronary circulation. scalpel, dissecting scissors, hygiene regulations.
Show the vessels entering and leaving the heart. Compare disposable gloves, 15 cm ruler
their thicknesses. that can be disinfected after use, Some learners may
Cut off the base of the heart to reveal the different access to warm water and soap not want to watch a
thicknesses of the walls of the left and right ventricles. for handwashing. dissection or may
Cut through the left ventricle and atrium and show the feel faint or
valves. A fuller method on uncomfortable.
Repeat the same process on the right side and identify demonstrating a heart dissection Provide an
similarities and differences. is available at: alternative for these
www.nuffieldfoundation.org/prac learners (for example
Make sure that learners can identify the left and the right side of tical-biology/looking-heart answering questions
the heart in a real structure and on diagrams. from a textbook).
Worksheets with organ outline
Alternatively, if a dissection is not possible then this activity and different key parts of the
could be replaced with one in which learners cut out different organ to cut out and paste into
parts of the organ and then paste them into the correct place on position on the organ outline,
an outline of the organ. scissors, glue/paste.
8Bh5 Recognise and Recap learning from previous activities. Identify the blood
model the basic vessels that carry blood to the heart and away from the heart.
components of the
circulatory system Learners look more closely at the different types of blood
and know their vessels and draw annotated diagrams of the three main types of Prepared microscope slides (if
functions blood vessels (arteries, veins, capillaries). They can use available) or images.
prepared microscope slides if available or images.
Extension activity
Learners who require more challenge predict what would
happen if someone cut a capillary, artery or vein.
Extension activity
Investigate how scientists developed their knowledge of the Secondary sources.
circulatory system from ancient times to the present day.
8Bh5 Recognise and Scientific Enquiry activity
model the basic Ask learners to find out how fast their heart is beating. This website is interactive and Health and safety:
components of the Can you find your pulse? How? How would you explain to could provide learners with The type of
circulatory system someone how to find their pulse? Can you only find your pulse information on taking pulse at exercise the
and know their on your neck and your wrist? rest and during exercise: learners choose
functions www.getinthezone.org.uk/school to do should be
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Learners, in pairs or groups of three, plan an investigation to s/ages-4-11/ages-9-11/game- safe to do in the
8Ep3 Select ideas and discover the effect of exercise on heart rate. They should decide the-pulse/ space available
turn them into a form on their independent, dependent and control variables and write (e.g. running on
that can be tested a method for the investigation. Information on the following the spot, sit ups,
website might help with planning star jumps).
8Ep4 Plan investigations As part of their plans, learners should identify activity-related this activity. Check that
to test ideas risks and hazards. They should decide the safety measures that www.tes.com/teaching- learners are fit
they will take. resource/the-effects-of-exercise- and healthy. Do
8Ep5 Identify important on-our-pulse-6324043 not ask learners
variables; choose Learners peer assess their methods with a different group. Learners should exercise at a who have health
which variables to There are several ways that this investigation could be reasonable pace for at least two issues to do the
change, control and completed. Learners should give each other feedback on minutes. exercise activity.
measure whether the method is clear: If the learners
What is the independent variable? follow their own
How will the independent variable be changed? method in the
What is the dependent variable? next lesson then
How will the dependent variable be measured? it must be
What are the control variables? checked by the
How will these variables be controlled? teacher in
What are the risks and how will they do the investigation advance.
safely?
8Bh5 Recognise and Provide learners with sources of information (printed or online). Secondary sources.
model the basic Learners research the functions of red blood cells and white
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
components of the blood cells.
circulatory system If time allows, learners can also find out about platelets and
and know their plasma.
functions
Learners use annotated diagrams to explain how blood
transports a range of substances around the body.
8Bh8 Recognise the basic Use a diagram to show learners the main components of the For example: Make learners aware
components of the respiratory system and the lungs, trachea and the necessary https://goo.gl/cESLCU (the full of the movement of
respiratory system muscles. url for this website is: the ribs and the
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
and know their www1.imperial.ac.uk/resources/ diaphragm when you
functions Show learners a picture of a cast of the lung. One side shows 3285AD1D-B374-4D98-8050- inhale and exhale.
the air vessels. The other side also shows the blood vessels. 4F3E4B8CB618/a3lunghumanc
8Bh10 Explain gaseous What are the names of the parts of the lung? Does the lung only astisamacroscopicviewofaplastic
exchange contain air? What else is in the lung? castoftheairwaysyellowthepulmo
Elicit the idea that the blood supply is very close to the air in the naryarteriesredandveinsblueofa
alveoli. humanlung)
Demonstrate a model of a lung using a balloon in a bell jar. An empty 500ml drink bottle
Identify features of the model lung (e.g. diaphragm, lung, (clear, without sport cap),
trachea, rib cage). drinking straw, balloon, scissors,
Demonstrate that the air is drawn into the lung because the tape, small piece of adhesive
volume around the lung increases (i.e. the air is not pushed into tack or modelling putty.
the lung). Learners can try to explain this using their
understanding of pressure in gases. Instructions of how to make a
simple model lung:
Ask learners to evaluate the model: What parts of the human https://youtu.be/MCEUW8moLeI
respiratory system does it model well? What does it not model
well?
Extension activity
Learners who require more challenge can compare and contrast
methods of artificial ventilation (e.g. negative pressure and
positive pressure ventilators).
8Bh8 Recognise the basic Measuring the volume of a breath Sensitivity may be
components of the A spirometer can be made from: required if learners
respiratory system Scientific Enquiry activity a 2-litre plastic soda bottle, have asthma or other
and know their Learners, in pairs or small groups, measure and record the masking tape, waterproof respiratory
functions volume of air they exhale in a standard breath. marker, large beaker with conditions.
measurement lines, deep bowl
8Bh10 Explain gaseous Using a spirometer: or basin, plastic aquarium tubing Health and safety:
exchange The spirometer needs to be filled with water and inverted into a (50-60 cm). Any objects being
bowl of water. One end of the aquarium tubing is placed into the Before the lesson, put a scale placed into learners’
8Ep4 Plan investigations open end of the bottle. The learner holds the bottle with one on the bottle: mouths must be
to test ideas hand and the other end of the tubing with the other hand. They Stick a piece of masking clean and
exhale into the tubing. Another learner records the volume of air tape vertically along the side disinfected.
8Eo1 Take appropriately expelled in each breath. of the bottle.
accurate Add 50 cm3 of water to the
measurements bottle (using a measuring
cylinder or beaker). Mark the
8Ec2 Identify trends and volume on the masking tape.
patterns in results Repeat, making marks at
(correlations) every 50 cm3 to make a
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
scale.
8Ec4 Identify anomalous Using a balloon:
results and suggest Alternatively, lung volume can be estimated with a round Balloons (round).
improvements to 4 Diagrams of the approaches can
investigations balloon (with the volume calculated from: V = π r 3 ). be seen at:
3
https://stjohns.digication.com/na
talia_boscodoss/Lab_2_Measuri
ng_Lung_Capacity
8Bh11 Describe the effects Show learners some images of people and organs that have Although selected
of smoking. been damaged by smoking. These could include lungs affected images should be
Secondary sources by cancer, amputations, effects of mouth cancer, etc. shocking, be
can be used sensitive as some
Ask learners to list the problems that result from smoking. learners may have
8Bh7 Discuss how relatives who have
conception, growth, If the equipment is available, then demonstrate the use of a Cotton wool, universal indicator smoking-related
development, ‘smoking machine’ which collects the products of a burning solution, thermometer, U-tube diseases. Some
behaviour and cigarette. The products are drawn through cotton wool and apparatus, syringe (to draw learners may find
health can be universal indicator solution and their temperature is taken. smoke through apparatus), some images make
affected by diet, Alternatively show a video of this demonstration. rubber tubing. them feel faint or
drugs and disease uncomfortable.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Ask learners to suggest the advantages and disadvantages of Health education material on
smoking. Debate the topics and identify that the long-term smoking. Health and safety:
disadvantages of smoking are very serious. Locally available The ‘smoking
health education material can be used. machine’
Conclude that cigarettes produce harmful waste products that demonstration
include tar, carcinogens and carbon monoxide. These waste should only be done
products contribute to disease. in a fume cupboard.
Discuss reasons why it is important that the airways are kept Nicotine is an
clean. Explain the essential role of the cilia and mucus in addictive drug and
effectively cleaning the incoming air. Relate the structure of the tar can cause
ciliated epithelial cells to their function. Learners can then cancer. Chemicals in
explain what happens when chemicals in cigarette smoke cigarettes paralyse
paralyse the cilia. the cilia so that the
airways cannot be
Learners design a poster/leaflet warning about the risks of cleaned effectively.
smoking, including on foetal development.
8Bh9 Define and describe Revise previous learning by asking learners to identify the Make sure that
aerobic respiration, differences between breathing, ventilation and respiration. learners know that
and use the word aerobic respiration
equation Ask learners to name the chemicals that the blood carries to requires oxygen.
each cell. Use these to write the reactants in the word equation
for aerobic respiration.
Ask learners if they know either of the products of this reaction.
Prompt learners for the full word equation for respiration.
Extension activity
Learners who require more challenge can compare
photosynthesis and aerobic respiration.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Unit 8.5 Metals and non-metals
It is recommended that this unit takes approximately 34% of the teaching time for this term.
In this unit, learners build on their previous knowledge of the Periodic Table and properties of materials and develop their ideas on:
the differences between metals and non-metals
chemical reactions
word equations.
In this unit, the reactions of metals can be confined to: sodium, magnesium, zinc, iron, copper, silver and gold.
Scientific enquiry work focuses on:
testing predictions with reference to evidence gained
planning investigations to test ideas
identifying important variables; choosing which variables to change, control and measure
making predictions using scientific knowledge and understanding
using a range of equipment correctly
comparing results with predictions
presenting conclusions to others in appropriate ways
presenting results as appropriate in tables and graphs.
8Cc2 Describe chemical Before we explore chemical reactions which are not useful (not
reactions which are beneficial for human activity) we need to explore chemical
not useful, e.g. reactions in general.
rusting
8Cc2 Describe chemical Start by showing photographs of some products of useful and Pictures of useful and not useful Misconception alert:
reactions which are not useful chemical reactions (e.g. burning, mouldy bread, chemical reactions. A chemical reaction
not useful, e.g. rusting, effect of acid rain on buildings, plastic products, cleaning is not inherently
rusting products). Learners identify each as ‘useful’ or ‘not useful’. They useful or not useful.
explain their choice. What we (humans)
8Eo2 Use a range of want to achieve
equipment correctly Show a picture of a rusty car or a bicycle. What is rusting? What Picture of a rusty car/bicycle. through chemistry,
are differences between corrosion and rusting? which defines a
reaction’s use, is
Introduce the terms ‘corrosion’ and ‘rusting’. Explain that rusting important but this
is an example of corrosion. Rusting is the name given to the doesn’t alter the
corrosion of iron and alloys containing iron (e.g. steel). nature of a reaction.
It is important to
Why does iron rust? What are the conditions necessary for the make this clear to
formation of rust? learners, so that they
Explain that rusting requires oxygen and water. What activities don’t believe there
can be carried out to prove this? are ‘good’ and ‘bad’
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
reactions.
Scientific Enquiry activity
Learners set up test tubes containing iron or steel nails under Iron or steel nails, anhydrous If possible, keep the
different conditions: copper sulfate (or anhydrous activity set up so that
in dry air in a sealed test tube (add anhydrous copper calcium chloride or a bag of the results can be
sulfate, anhydrous calcium chloride or a bag of silica gel to silica gel), distilled water, oil, further discussed in
the tube) salt, test tubes, test tube racks, the ‘preventing rust’
in boiled, distilled water covered with a layer of oil bungs. lesson below.
dipped in water, then placed in an open test tube
in salty water in an open test tube.
8Cc2 Describe chemical Ask learners to remember the results of the investigation on
reactions which are rusting. What effect did salt have on rusting? Explain that
not useful, e.g. adding salt makes rusting go faster. What else might affect the
rusting speed of rusting? Do you think rusting is more of a problem in
cold places or hot places?
8Ep2 Test predictions with
reference to Give learners data, from a secondary source, of the mass of an Data on rusting at different
evidence gained iron nail before and after an investigation into rusting carried out temperatures (it does not have
at different temperatures (include one unexpected result). to be exact as long as it shows
8Ep4 Plan investigations an increase in rate – greater
to test ideas Learners analyse and interpret these data: mass loss – at different
They decide what the axes should be and plot the data on a temperatures), graph paper.
8Ep5 Identify important line graph.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
variables; choose They draw a line of best fit. Are all results as expected?
which variables to
change, control and Explain that the unexpected, anomalous result should not be
measure included in the line of best fit. Suggest possible reasons for the
anomaly and ways of improvement.
8Ep6 Make predictions
using scientific
knowledge and
understanding
Extension activity
Learners identify and record ways that rust is prevented in the
school grounds, in a car and at home. Learners could make a
list or take photographs.
8Ec5 Interpret data from Provide learners with information sources (printed or online Secondary sources.
secondary sources material). Learners need to find the answer to the questions:
Provide learners with information sources (printed or online Secondary sources / model ear.
material). Learners research the story of how we hear sounds:
Where do sound waves enter the ear?
What parts of the ear vibrate?
What do hair cells do?
How are sounds of different pitch detected?
Learners research the parts of the ear and describe how the ear Secondary sources / model ear.
detects sound. Learners produce a flow chart to show how the
ear detects sound.
Demonstrate ear structure using a model ear.
8Ps1 Explain the Use a signal generator and a loudspeaker to investigate the Signal generator, loudspeaker, Be very sensitive if
properties of sound class’ range of hearing. The additional use of a cathode ray cathode ray, oscilloscope. any learners have a
in terms of oscilloscope (CRO) enables learners to ‘see’ that the sound is hearing condition.
movement of air still being produced even when it is above the pitch they can Video of signal generator:
particles. hear. www.youtube.com/watch?
v=pHS8zCdscTg
8Ps2 Recognise the link
between loudness Alternatively, use a sound generator to produce sounds of Sound generator:
and amplitude, pitch different frequencies. Identify the highest-frequency sounds that http://onlinetonegenerator.com/h
and frequency, using learners in the class can hear. Compare this with the highest earingtest.html
an oscilloscope. sounds that adults can hear.
Interpret data from Give learners secondary data on the hearing thresholds of Data on the hearing range of
8Ec5 secondary sources. humans and a range of animals. Learners should plot a graph of different species:
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
the data. They summarise the differences between the www.lsu.edu/deafness/Hearing
frequencies that different species can hear. Range.html
Place a sound source in a closed box. Demonstrate that the Source of sound (e.g. a bell),
sound can pass through the box even though the air molecules box with lid.
cannot.
Alternatively, create a large film of detergent that is larger than a Loop (e.g. from a wire
source of sound (e.g. a speaker). Demonstrate that the sound coathanger), detergent,
can pass through the film of detergent without breaking it. loudspeaker:
Ask: How is the sound reaching our ears? Are the air particles https://youtu.be/aj9ZOzIXaYc
moving from the source to the detector? (0.16–0.23)
8Ps1 Explain the Ask learners why lightning is seen before thunder is heard. Elicit Alternatively, the
properties of sound the idea that sound waves travel more slowly than light. echo received from a
in terms of distant wall can be
movement of air Remind learners that to calculate speed (e.g. km per hour) you used but remind
particles. need a distance (km) and a time (hours). Show the speed learners that the
equation. sound travels twice
8Ep3 Select ideas and the distance.
turn them into a form Ask learners to discuss ways that they could measure the speed
that can be tested. of sound. They should decide on their independent, dependent
and control variables. As part of their plan they should identify
8Ep4 Plan investigations how they will make their measurements as accurate as possible.
to test ideas. Learners should write a detailed plan for their investigation. As
part of their plan they should include information about how
8Ep5 Identify important many times they will repeat their measurements.
variables; choose
which variables to Groups of learners carry out the investigation to measure Equipment to measure distance
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
change, control and the speed of sound waves. Circulate and provide support for (e.g. tape measure, trundle
measure. groups. wheel) and time (e.g. It is good practice for
Learners collect and interpret their results. They should stopwatch). the class to average
8Eo4 Present results as design a results table with space for repeated readings. their measurements,
appropriate in tables Learners should compare their results with those from other discarding any which
and graphs. groups. Ask learners: Do you see any patterns (similarities) seem to be very
in the results from different groups? inaccurate.
8Ec2 Identify trends and Learners should identify whether they have any anomalous
patterns in results results from repeated readings. If there are anomalous
(correlations). results then they should take another repeated reading (if
there is time).
8Ec4 Identify anomalous
results and suggest Conclude that the speed of sound can be calculated from data
improvements to on distance and time.
investigations.
8Ps2 Recognise the link Revise that, in sound, the air particles move backwards and
between loudness forwards. Show an animation of this process. Ask learners to
and amplitude, pitch describe what they see. Elicit the idea that there are waves
and frequency, using across the screen.
an oscilloscope.
Explain that even though the individual air particles do not move
very far, there are waves that travel from the source to the
detector.
Use a loudspeaker. Demonstrate the different vibrations when Loudspeaker and signal
quiet and loud notes are made. generator.
Learners create a role play that models how air particles move
as a result of loud and soft sounds.
They then model the vibration of air particles for different
combinations of pitch and frequency. Groups of learners can
demonstrate these to each other. The audience have to decide
the type of sound that is being represented.
In this unit, learners build on their previous knowledge of the characteristics of living things to develop their knowledge of:
the human reproductive system, including the menstrual cycle, fertilisation and foetal development
the physical and emotional changes that take place during adolescence
how conception, growth, development, behaviour and health can be affected by diet, drugs and disease.
8Bh13 Describe the human Show learners a diagram of the thickness of the uterus during Diagram of the thickness of the Note: it is important
reproductive system, the menstrual cycle. Ask learners to identify: uterus during the menstrual to explain to learners
including the when the uterus wall is getting thicker. cycle. that different women
menstrual cycle, when the uterus wall is getting thinner. have menstrual
fertilisation and when menstruation takes place. cycles of different
foetal development. lengths (e.g. 24 to 35
Explain that the menstrual cycle is numbered from the first day days). During
of menstruation. puberty it is common
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
What day is the egg released? to have menstrual
What is the lining of the uterus like when the egg is released? cycles of irregular
How long does the menstrual cycle on this diagram last? lengths. Diagrams of
menstrual cycles
Extension activity: Explain that the menstrual cycle is Labelled diagram of the show 28 days as this
controlled by hormones. Give learners the following information: menstrual cycle including the is an average.
Hormone 1 controls ovulation from the ovary. hormone levels.
Hormone 2 stops a thick uterus lining breaking down. Note: at this level,
Hormone 3 causes the uterus lining to get thicker. It also learners do not have
causes hormone 1 to be produced. to recall the names
Also give learners a labelled diagram of the menstrual cycle with or functions of the
the levels of LH, progesterone and oestrogen. hormones in the
In pairs, learners need to work out the names of hormones 1, 2 menstrual cycle.
and 3.
8Bh13 Describe the human An effective way to explain fertilisation is to tell learners a story:
reproductive system, ‘Let me read you a story – listen and imagine. Once upon a time
including the there were two important cells ….’ Tell the story of the journey of
menstrual cycle, the sperm cell and egg cell.
fertilisation and
foetal development. Describe fertilisation as the fusing of the sperm nucleus and the
egg nucleus. Learners identify their adaptations and link them to
their functions.
Learners often ask about twins. Explain that identical twins are
due to one fertilised egg dividing to form two foetuses. Non-
identical twins are due to two eggs each being fertilised by
different sperm.
8Bh13 Describe the human Show learners a video clip that shows the development of a Note: this video uses animations
reproductive system, human embryo. Choose video clips that show the division of the from 01:55–04:55 and then
including the fertilised egg and lead on to the further development. Check includes an augmented image of
menstrual cycle, videos for suitability of content before showing them to learners a real birth:
fertilisation and www.ted.com/talks/alexander_ts
foetal development. iaras_conception_to_birth_visua
lized
Provide learners with information sources (printed or online
material) on foetal development. Learners draw and annotate a Information sources for learners.
sequence of pictures or diagrams illustrating ovulation,
fertilisation, cell division and implantation.
Discuss the foetus’ need for nutrients and explain the role of the
placenta in materials exchange.
Learners label a diagram and use arrows to show movement of Diagram of the placenta and
oxygen and nutrients from the mother to the foetus and the umbilical cord.
movement of carbon dioxide and other waste products from the
foetus to the mother.
8Bh7 Discuss how Ask learners to identify the substances that can pass from the
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
conception, growth, mother to the foetus through the placenta.
development,
behaviour and Show images of the effect of Foetal Alcohol Syndrome and point Images of people with Foetal Deal with the subject
health can be out the smooth philtrum and thin upper lip. Alcohol Syndrome. sensitively.
affected by diet, Explain that this is due to alcohol passing into the foetus and
drugs and disease. damaging it.
8Ec5 Interpret data from Provide learners with information sources (printed or online Information sources for learners.
secondary sources. material) on things that can affect conception (fertilisation),
growth or foetal development. Groups can research different
topics and report to the class:
diet (e.g. lack of folic acid, iron or calcium)
smoking
drugs (e.g. cocaine or heroin)
disease (e.g. diabetes, malaria or rubella).
8Bh7 Discuss how Provide learners with growth charts (graphs) showing human Growth chart which shows the Explain the use of
conception, growth, growth. Ask them to interpret the graphs. average height of boys and girls growth charts but
development, Discuss at which periods in life there is rapid growth and how at different ages. point out that these
behaviour and this growth can be measured. are for an average
health can be person.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
affected by diet, Learners, in pairs, investigate how growth can be affected by Secondary sources.
drugs and disease. diet, drugs or disease.
They present their chosen topic (diet, drugs, or disease) to the Note: a wide variety of diseases Selection of example
rest of the class. could be selected as examples diseases will need
8Ec5 Interpret data from (e.g. parasitic worms, diet sensitivity.
secondary sources. All learners create a summary of the main points from the deficiency diseases, genetic
presentations. conditions, coeliac disease,
kidney diseases).
8Bh7 Discuss how Discuss what learners understand about drugs. Deal with the subject
conception, growth, Introduce the terms ‘illegal drugs’, ‘legal drugs’ or sensitively.
development, ‘pharmaceutical drugs’.
behaviour and Learners classify a range of drugs (e.g. penicillin, alcohol, List of drugs.
health can be nicotine, heroin, aspirin etc.)
affected by diet,
drugs and disease. Learners use secondary sources to research into the effects of Secondary sources.
the different types of drugs on the health of an adolescent.
8Bh7 Discuss how Learners will have encountered many parts of this learning
conception, growth, objective throughout stage 8. To consolidate their learning, they
development, create a summary (e.g. a mind map).
behaviour and
health can be Some teachers may also like learners to consider sexually-
affected by diet, transmitted diseases in the context of this unit.
drugs and disease.
Unit 8.8 Chemical reactions
It is recommended that this unit takes approximately 33% of the teaching time for this term.
In this unit, learners build on their previous knowledge of mixtures, compounds, metals and corrosion to develop their knowledge of:
some common compounds including oxides, hydroxides, chlorides, sulfates and carbonates
using word equations to describe a reaction.
8Cc1 Use a word equation Preparation of sulfates Cards showing the main steps in
to describe a Give learners sets of cards describing the main steps of the preparing a metal chloride by
common reaction. reaction between a metal and hydrochloric acid. Learners put reacting a metal and
Secondary sources the steps in the correct order. hydrochloric acid.
can be used.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
Demonstrate how to use the same procedure to prepare a metal Zinc, copper oxide or copper
8Cp5 Name some sulfate using sulfuric acid. carbonate, dilute sulfuric acid
common compounds (0.5 mol dm-3, irritant), laboratory Health and safety:
including oxides, Learners, in groups, repeat the method to prepare either zinc glassware, spatula. Safety goggles must
hydroxides, sulfate or copper sulfate using one of these reactions: be worn.
chlorides, sulfates zinc and sulfuric acid The reaction of copper oxide
and carbonates. copper oxide and sulfuric acid with sulfuric acid involves clear
copper carbonate and sulfuric acid. colour changes. A full protocol
8Eo2 Use a range of can be found at:
equipment correctly. Before starting the practical activity each learner should www.rsc.org/learn-
assess the risks involved and agree the safety measures chemistry/resource/res0000191
8Eo3 Discuss and control required. 7/reacting-copper-ii-oxide-with-
risks to themselves The reactants and products can be weighed to revise sulfuric-acid?
and others. conservation of mass. cmpid=CMP00006703
If reagents are unavailable, the video can be watched.
Preparation of copper sulfate:
Learners practise writing word equations for each reaction.
www.youtube.com/watch?
v=PTa8tkJ8rv0
Conclude that sulfates can be prepared by reacting metal or a
metal compound with sulfuric acid.
8Cp5 Name some Explain that the carbon dioxide used in fizzy drinks can be
common compounds produced when carbonates react with acids. Give an example
including oxides, word equation for the reaction of a carbonate with acid, e.g.:
hydroxides, calcium carbonate + hydrochloric acid →
chlorides, sulfates calcium chloride + water + carbon dioxide
and carbonates.
Before starting the practical activity each learner should assess Calcium carbonate, sodium Common names –
8Eo2 Use a range of the risks involved and agree the safety measures required. carbonate or sodium hydrogen sodium bicarbonate,
equipment correctly. carbonate. limestone and chalk
Learners investigate the reaction of one or more carbonates Dilute acid e.g. sulfuric acid (0.5 – should be given.
8Eo3 Discuss and control with acid. For each reaction they: mol dm-3 irritant), hydrochloric
risks to themselves describe the appearance of the reactants acid (0.5 mol dm-3 irritant) or Health and safety:
and others. describe the appearance of the products vinegar. Eye protection
identify the signs of a chemical reaction Test tubes, dropping pipettes, must be worn.
8Ep3 Select ideas and test the gas produced with limewater limewater, delivery tubes. Learners must
turn them into a form write a word equation. identify and
that can be tested. follow the safety
Conclude that carbon dioxide is formed when carbonates react measures
8Eo4 Present results as with acids. required for
appropriate in tables working with
and graphs. acids.
Learners identify the metal present in some compounds using a Labelled wooden splints pre- One should be
flame test. soaked (for at least 6–8 hours) labelled as
Before starting, they should discuss the risks and hazards and in solutions of compounds of: ‘unknown’.
agree safety measures. potassium
lithium Health and safety:
Learners observe flame colours for the following metals: calcium Eye protection
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
potassium, lithium, calcium, copper and sodium. copper must be worn.
They present their findings in a table and use results to sodium. Learners need to
identify the unknown element. be taught how to
use heat sources
Flame test simulation such as safely.
If learners are unable to perform the practical: https://www.newpathonline.c
Use a simulation of flame tests. Learners observe the colours of om/free-curriculum-
different flames and identify the metal element in an unknown resources/virtual_lab/Chemi
sample. stry_Flame_Test/9/12,13,14/
1914
Conclude that elements combine together to make new
compounds.
In this unit, learners build on their previous knowledge of the effects of forces on movement to develop their knowledge of:
speed including interpreting simple distance/time graphs
magnets, electromagnets and magnetic fields.
8Eo2 Use a range of For each activity, learners need to measure the distance they
equipment correctly. have moved and record the results in their tables. They then
calculate the mean distance they travelled in 10 seconds for
8Eo3 Discuss and control each activity.
risks to themselves
and others. distance
Elicit that speed =
time
8Eo4 Present results as
appropriate in tables Learners return to the classroom and discuss their results:
and graphs. Was it a fair test?
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
8Ec1 Make simple How accurate were the measurements?
calculations. Were there any anomalous results?
How could the investigation be improved?
8Pf2 Interpret simple Ask learners to list the different ways they can present the If available a motion
distance/time results of an investigation. Do you prefer tables or graphs? sensor device could
graphs. Why? What are their advantages and disadvantages? be used here.
Elicit the idea that tables are good for organising data. For It is a very useful
8Eo1 Take appropriately analysis, graphs can make trends easier to see. Example data to draw a simple device for showing
accurate distance/time graph. motion instantly on
measurements. Demonstrate how to draw a distance/time graph from example screen. The device
data. The graph should show two periods of movement with a emits ultrasound
8Eo2 Use a range of stationary period in the middle. waves which reflect
equipment correctly. Large space, stop watch (one and return from an
Scientific Enquiry activity for each learner), distance object ahead. The
8Eo4 Present results as Arrange most of the learners in a line. They should be 1 m apart measurer. computer measures
appropriate in tables and all should have stop watches. the time interval and
and graphs. Ask one learner to walk along the line, varying their speed plots the
as they go (including at least one stop). distance/time graph
8Ec1 Make simple All learners in the line start their stopwatches when the so that a learner
calculations. teacher says ‘go’. They stop their stopwatches when the moving towards the
learner walks past them. computer can see
Learners collect the data and use it to create a distance/time the shape
graph. immediately.
8Pf2 Interpret simple Show learners some distance/time graphs (e.g. those created in Learners do not
distance/time the previous activities) from last lesson. Which part shows the need to be able to
graphs. object stationary? Which part shows the object moving away? calculate the
Which part shows the object moving quickly? Can you tell if an gradient of a graph
object is moving forwards or backwards on a distance/time at this stage.
graph?
Introduce a model to explain the activity of magnets. In the Animations explaining the
‘domain model’ materials contain lots of mini-magnets domain/mini-magnet model.
(‘domains’) each of which has a north and south pole. In most (Use the ‘by pane’ option to
materials these are in random orientations. In a magnet, all the access the animations.)
domains are lined up so that they form one big magnet. What http://supportingphysicsteaching
would happen if a magnet was cut in half? How many magnets .net/XBP/Em_MiniMagnets/inde
could you get? x.html
Use an animation so learners can visualise the domains Animations using the mini-
becoming arranged in the nail. What would happen if you magnet model to explain how a
stroked the magnet in different directions? nail can be magnetised. (Use
the ‘by pane’ option to access
If there is time, learners investigate whether their predictions are the animations.)
correct. http://supportingphysicsteaching
.net/XBP/Em_Stroking/index.ht
ml
Learners, in pairs, draw the field around a bar magnet. Compare For each pair of learners: bar
results. magnet, compass, sheet of A3
paper, pencils.
Use the simulation again with the magnetic field visible. Ask
learners to compare the shape of this field with the one they
have drawn.
8Pm3 Construct and use Show a video clip of a crane in a scrap yard. Learners discuss Possible video: Avoid/rectify
an electromagnet. what they observe and how they think it works. https://youtu.be/6yhNOXQkMpY misconceptions
about copper itself
8Ep4 Plan investigations Discuss ideas. Elicit the idea that the crane contains a magnet being a magnetic
to test ideas. that can be turned on and off. material, even when
it is used in an
Framework Learning Objective Suggested activities to choose from Resources Comments
Code
8Ep5 Identify important Copper is non-magnetic but when it carries a current it creates a electromagnet.
variables; choose temporary magnetic field around it. An electromagnet is
which variables to designed to use this idea. Explaining current as
change, control and Use the animations with ‘show moving electrons is
measure. A simulation can help visualise what is happening in an internal view’: not required at this
electromagnet when there is, and is not, a current. http://supportingphysicsteaching stage.
8Eo2 Use a range of .net/XBP/Em_DirectCurrent/inde
equipment correctly. x.html
8Eo3 Discuss and control Learners make their own electromagnet using a low voltage Low voltage power pack or
risks to themselves applied to an insulated copper wire wrapped around an iron nail. batteries (rechargeable batteries Health and safety:
and others. are unsuitable and dangerous), Mains electricity
They test this with a compass to detect magnetism. Is the shape insulated copper wire, crocodile should never be
8Eo4 Present results as of the field the same as with a permanent magnet? Is the clips, iron nail, plotting compass. used directly for any
appropriate in tables magnetism permanent? Does the magnetism ‘disappear’ when of these
and graphs. the current stops? Does the magnetism ‘disappear’ when the investigations. If it is
nail is removed but current kept on? not being used for
8Ec6 Discuss power packs, then it
explanations for Scientific Enquiry activity should ideally be
results using Learners use their electromagnet to pick up small items like switched off. Clear
scientific knowledge paper clips. By using the ‘number of paper clips picked up’ as safety measures
and understanding. their dependent variable, they design an investigation to find Low voltage power pack or must be explained
Communicate these out: batteries (rechargeable batteries and followed.
clearly to others. How does the number of coils of copper wire affect the are unsuitable and dangerous), Rechargeable
insulated copper wire, crocodile batteries should not
strength of the electromagnet?
8Ec7 Present conclusions clips, iron nail, paper clips. be used.
How does the current in the wire affect the strength of the
to others in electromagnet?
appropriate ways.
This is an opportunity for learners to demonstrate a wide range
of scientific enquiry skills by planning, doing, interpreting and
evaluating their own investigation.
Framework Learning Objective Suggested activities to choose from Resources Comments
Code