After completion of analysis it is necessary to develop a plan for sampling. In the
R&D section the development work starts normally with desk loom or handloom sample. In the section there is one desk loom available which is operated by an weaver. On the other hand one handloom is available which is operated manually in total. To develop a desk loom or handloom sample it is required to make an accurate pattern of fabric. Normally yarn dyed fabrics are developed regularly in the desk loom or handloom. So at first, planning for sampling may start with desk loom. After producing a handloom swatch from the analyzed information, that swatch is being submitted to the related buyers through merchandises for pattern & colour approval. If buyer approves then R&D makes the program to develop 150m fabric at first then 650 m fabric for LF & CS sample. This is for normal yarn dyed development. For solid dyed fabric the planning for development mainly depends on the quantity requirement of buyer. For both cases, first of all papers are being made from analysis data & then the programs for yarn requisition from SRSL, for yarn dyeing (in case of yarn dyed fabric),for warping & sizing, for weaving & finally for processing are supplied to complete the work.