2. Name of calender which is used for imparting anti-shrink
finish. Felt calender
3. What is main chemical used for water-proofing?
Rubber
4. Fire-proofing is ___ finish.
Permanent and chemical
5. Name chemical used for anti-crease finish.
Urea formaldehyde
6. Anti-static agents can be applied to stage of :
A. Filament B. Yarn C. Fabric D. Any of A, B, and C
7. Which chemical of the following is anti-static agent? A.
Fluro chemical B. Acrylic polymer C. Both A and B 8. What is/are pilling influencing factor : A. Fibre characteristic B. Fabric characteristic C. Both of A and B
9. Name of chemical used for weighting of silk.
Tin chloride
10. Wax dispersion is used for ____ finish.
Water repellency
Class Test-2
1. Unused VAT dye can be recovered for reuse by
prepitation with: H2O2
2. For water repellency finish we use :
Tris
3. Drawback of printing with azoic colours is:
there’s no drawback 4. Condition/s required for ETP settlement is/are: A.Operation cost should be low B.Design should be simple C.ETP must be set at low level area D.all of the above
5. Coagulation process is being done in:
primary treatment
6. The effluent is primarily tested for:
A.BOD B.COD C.DOC D.All of them
7. Latest technique for printing is:
digital printing
8. In roller printing, hollow steel drum is wrapped by ___
whuch forms 2.5inch-3 inch thick bed. Jute
9. Disadvantage of roller printing is/are:
continuity of design is not proper
10. Transfer printing is used for:
Polyester Printing ki Jali ------ Silk
Reactive dye both hot and cold --------
Polyster/Cellulosic (One bath method using disperse and reactive dye)
Ground of fabric is dyed in --------- Discharge Style
Drum of roller printing ---------- Jute of thickness 8-12
Layer(30-50m length)
Printing Gum------- Indica Gum(Screen Printing),
Gum Sengal(Block and screen printing)
Ageing time------- alkaline Solution
Starch and wax are in category----------- Scouring
Function of Primary treatment------ Coagulation,
pigmentation Machine for scouring and dyeing---------HTHP(Beam)