Professional Documents
Culture Documents
Node G938
Node G938
SPECIFICATION
Electrical
Downlink power, dBm Far off selectivity (ultimate rejection), dBc . . . . . . . -100
Node G
SPECIFICATIONS
The Node G 938 and Node G 941 are dedicated Features and functions may be locally or remotely moni-
GSM device. They requires no additional hardware tored and changed via a web browser.
upgrades as a network migrates from the present GMSK
In addition, Andrew provides a dedicated OMC and
modulation (GSM/ GPRS) to 8PSK modulation (EDGE).
has implemented a standard SNMP based MIB that
This software programmable radio may be upgraded can easily integrate into any 3rd party OMC platform.
locally through an USB based web connection or The graphical browser provides an intuitive setup menu,
remotely via a wireless modem. The modem may be cir- including a wizard that allows users, regardless of skill
cuit switch or packet data based. This provides the net- level, to correctly setup the equipment without any addi-
work management system with on-demand, alarm gener- tional equipment.
ated, or heartbeat monitoring via the always-connected
packet features.
Alarm Menu
SPECIFICATIONS
Features
Items measured . . . . . . . . . . . . . . . . . . . . . . . Measurement of BCCH power, channel power, BER, VSWR, RSSI, system identification.
Weekly statistics . . . . . . . . . . . . . . . . . . . . . . . Collecting data (min, max, average, standard deviation) of items measured in a 15 minutes interval.
Interference cancellation equipment (ICE) . . . . . . Electronic improvement of antenna isolation. Capable of greater than 35 dB of enhancement.
Hopping ability . . . . . . . . . . . . . . . . . . . . . . . . . Follows the hopping sequence for complete network transparency.
Auto configuration . . . . . . . . . . . . . . . . . . . . . . Setup based on downlink power requirements, not gain. Uplink gain is automatically setup based on the downlink settings.
Uplink muting. . . . . . . . . . . . . . . . . . . . . . . . . Gain reduction of unused timeslots in order to avoid Uplink desensitization of the BTS receiver.
Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . Web browser based local access and remote access. Packet data and circuit switched data options. OMC connectivity via SNMP.
External alarm clamps . . . . . . . . . . . . . . . . . . . . Up to 4 alarms, high or low active setable via software.
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pole mounting kit and free standing option.
www.commscope.com
Visit our Web site or contact your local Andrew Wireless Solutions representative for more information.