Professional Documents
Culture Documents
500 Series - Fe 1426 Hino
500 Series - Fe 1426 Hino
AUTOMATIC MODELS
SRS airbag for driver Equipped GVM 14,000 (optional 12,000 available on application)
HINO.CO.NZ
ENGINE & DRIVELINE 500 SERIES - FE 1426
AUTOMATIC MODELS
SPECIFICATIONS
ENGINE SUSPENSION & LOAD LIMITS
Front
Number 4
Combustion system Direct injection with EGR
Spring rate
Bore & stroke 112 x 130mm 27
(kgf / mm2)
Piston displacement 5.123L
Axle limit (includ-
5,000kg
Compression ratio 17.0:1 ing suspension)
Air compressor / bore & stroke Single cylinder / 70 x 40mm Rear axle model SH14
Air cleaner Dual paper elements Rear axle type Fully floating, single reduction by hypoid gears
with shock
Length and width 1,300 x 70 900 x 70 absorbers and
BRAKES
mechanical
Number 4 5 ride height
Type Drum brakes front and rear
Spring rate valve
Air Over Hydraulic (AOH), Dual 29 104
Control (kgf / mm2)
circuit
Axle limit (includ-
Drum diameter x lining width front 370 x 120mm 9,000kg
ing suspension)
Drum diameter x lining width rear 370 x 150mm
Tyre limit 9,400kg
Air Dryer Equipped
Park brake Spring brake acting on rear wheels Fuel capacity 100L 200L
Brake lock Equipped except for FC2AL & FC2AN Lockable fuel cap Equipped
3 1.439
Gear Ratios
5 0.737 PERFORMANCE
Torque convertor & ratio 1.58 Max theoretical speed (km/h) 129
Forward control, rest cab, all steel construction with Meters Gear position (AT models only)
Type
torsion bar tilt mechanism
Speedometer Steering wheel controls
Grille colour Matte Grey
Tachometer Cruise control
ADR 42 sleeper berth Compliant
Air Gauges MID controls
Seating capacity 3
LCD display Additional switches and controls
ISRI 6860 NTS2 air suspension, 10 way adjustable
Drivers seat
with integrated safety belt and rear pocket Time External flat mirror control
Side passenger seat High back and reclining seat Temperature Gauge VSC off
Centre seat Foldaway type with integrated tray Adblue® Gauge PCS off
3 point lap sash for driver and side passenger, 2 Fuel Gauge LDWS off
Seat belts
point lap for centre position
Odometer Idle up
Sunvisor and
For driver and passenger sides Hour Meter Quick warm up
overhead console
Windscreen wipers 2 arm wiper and washers, 2 speed with intermittent Date & Day Mirror heater
Cab heater and air Equipped with 4 speed fan, rear heater and fan Multi Information Display (MID) Engine brake
conditioner located under the seat
Power and economy
General information
External : Electric & heated, 2 flat type, 2 convex (AMT & AT models only)
Rear view mirrors
spotters & kerb view
Cruise Control setting DPR regeneration
Auxiliary power
12 volt 120W socket and USB 2.1 amp Eco Tree Electric window lock out
supply
Display setting Head light leveller
Floor covering Vinyl type
Suspension Dump
Central locking and Safe driving settings
Equipped with immobiliser (Air suspension models only)
keyless entry
Cup holders 3 centre and 2 door beverage holders Type 24 volt negative earth
6.5” LCD, HD touch screen display with DAB+ AM/ Batteries 12 volt x 2 120 AH (1155F51)
Multimedia System FM radio, AUX input, Bluetooth®4.1, Android 6.0,
CANBUS connected and Wi-Fi enabled Alternator capacity 24 volt x 90 amp
STEERING Headlamps LED main beam with LED daytime running lamps
Telescopic and tilt steering column with LED cornering/Fog lamps Equipped
Type locking device. Recirculating ball with integral
LED Interior
power steering. Equipped
and reading lamp
Gear ratio 19.0:1
Electric air horn Equipped
Steering angles - Inside 53°
CANBUS connected Equipped J1939 protocol (see BMM for details)
Steering angles - Outside 38°
Chassis frame
FE2AG FE2AL FE2AP
OUTPUT (kW) TORQUE (N-m) wheelbase variants
(hp) 200
191kW/2300RPM Main section in mm
260 (260hp/2300RPM) 231.0 x 233.0 x 78 231.6 x 78
180 1000 (depth x flange x
240 78 x 6.5 x 7.5 x 6.8
thickness)
220 160 800
882N-m/1400RPM
200 Chassis width 820mm
140 600
180 Tensile strength 540 N/mm2 (55 kgf/mm2)
160 120 400
140 Front Underrun
100 Protection Device Equipped
120
(FUPD)
80
Tow hook capacity
2,000 kgf (max angle of 15°)
2300 (front and rear)
1000 1400 1800 2200 2600
Type Ladder-shaped channel section side rails
ENGINE SPEED (RPM)
DIMENSIONS 500 SERIES - FE 1426
AUTOMATIC MODELS
DIMENSIONS
Indicative Chassis Mass – kg (10 litres of fuel, no tools or spare tyre & subject to a ±3% tolerance
GCM 21,000
CA
RCH
OH
OW FT 820 RT
FO B ROH
OL
Drawings are for reference only to the table. For specific chassis layouts and dimensions please refer to Body Mounting Manual drawings.
WARRANTY
DISCLAIMER
Important notice. Hino Trucks are distributed in New Zealand by Hino Distributors (NZ) Ltd.
All efforts have been made to ensure the information contained in this brochure was correct at time of printing or uploading. Hino Distributors (NZ)
Ltd reserves the right to alter any details of the specifications and equipment without notice. Hino in so far as it is permitted by law to do so, shall
not be liable in any way as a result of any reliance placed by any person on anything contained in this brochure. You should therefore check with
your authorised Hino dealer at the time of ordering your motor vehicle to ensure that colour, specifications, equipment, design features and options
are available for the vehicle you are ordering. Please note that some options may only be available in combination with others. Authorised Hino
dealers will on request provide up to date information on all accessories, design features, prices and availability.