Cadenas Hyundai

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HYUNDAI

Azera 3.8L G6DA 2006-08


Entourage 3.8L G6DA 2007-08
Sonata 3.3L G6DB 2006-08
Veracruz 3.8L G6DA 2008

Special tools • Install RH timing chain:


o Ensure crankshaft keyway aligned with
• Crankshaft locking tool - No.09231-3C300. cylinder block timing mark fl.
o Ensure RH camshaft sprocket timing marks
General precautions m.
aligned with colored links
o Ensure timing mark on outer crankshaft
• Disconnect battery ground cable. sprocket aligned with colored timing chain
• Do NOT turn crankshaft or camshaft with link D.
timing chain removed. NOTE: Crankshaft has two separate
• Remove spark plugs to ease turning engine. sprockets. Timing mark is located on outer
• Turn crankshaft in normal direction of rotation sprocket D.
(unless otherwise stated).
• Lock timing chain tensioners as follows:
• If required: Mark position of crankshaft position o Release tensioner ratchet Ii].
(CKP) sensor before removal.
o Compress tensioner plunger liJ.
• Do NOT turn crankshaft via camshaft or other
sprockets.
o Retain ratchet arm and plunger in position
with a pin ml.
• Observe all tightening torques.
• Install LH and RH timing chain tensioners.
• Remove tensioner retaining pin ml.
• Turn crankshaft 2 turns clockwise until
• Position crankshaft and camshafts as follows: crankshaft keyway aligned with cylinder block
o
Engine No.1 cylinder at TDC of compression timing mark fl.
stroke D. • Ensure timing marks B & EJ aligned.
o Ensure crankshaft keyway aligned with • If not, repeat installation procedures.
cylinder block timing mark fl.
o Ensure camshaft sprocket timing marks
B & EJ aligned with upper surface of cylinder
head.
• Install LH timing chain:
o Ensure LH camshaft sprocket timing marks
aligned with colored chain links 1:1.
o Position LH timing chain on rear crankshaft
sprocket.
NOTE: Crankshaft has two separate
sprockets.
o Ensure timing chain is taut between
sprockets on non-tensioned side and
between camshaft sprockets.
• Install oil pump chain and oil pump sprocket as
an assembly.

-~----------
---------

IAutodata I
---------------~

You might also like