Professional Documents
Culture Documents
Manual-WT6000-M032200-G08300-rev4 (1) - 42-45
Manual-WT6000-M032200-G08300-rev4 (1) - 42-45
0/ G08300-00-19_08/2014
WELD CONTROL Before welding can begin, the following parameters need to be
PROGRAMMING programmed into the weld processor.
AND SETUP
C Review Setups
- 41 of 44/Chp4_install .fm -
M032200 V4.0/ G08300-00-19_08/2014
Review and program the Weld Schedules as required for the welding
application.
NOTE: Refer to
Chapter 6:
Programming
Schedules or Glossary B Program Mode
of Schedule Functions
for detailed
information regarding
function descriptions
and the programming
of weld schedules.
C Review Schedule
- 42 of 44/Chp4_install .fm -
M032200 V4.0/ G08300-00-19_08/2014
B Program Mode
NOTE: Refer to
Chapter 8: Linear
Current Steppers for
detailed information
regarding the
description and
programming of
linear current
steppers.
C Review Stepper
- 43 of 44/Chp4_install .fm -
M032200 V4.0/ G08300-00-19_08/2014
D Using the number keys edit the required functions and
press . This will turn “Apply” from gray to black. Press
to apply the changes.
- 44 of 44/Chp4_install .fm -