Professional Documents
Culture Documents
User Manual 5032480
User Manual 5032480
User Manual 5032480
无线路由器连接
小蜜蜂(Wi-Fi版)数采器
2.1 APP下载
快速安装指南
① 扫描右方的二维码,下载APP。
iOS Android
1. 电气连接
① 根据数采器型号在右方找到对应
的接口编码。 Wi-Fi PlugII - 04(方案2)
❶ 请输入用户名
请选择一个Wi-Fi数采器并与其连接
选取无线网络...
2018LA
W2015
① 打开APP,点击“Wi-Fi配置”按钮,
进入“Wi-Fi配置”页面。
请输入密码 请输入无线密码
② 根据接口编码按照对应图示进行 记住密码
Eybond2015
12345678 ② 在“Wi-Fi配置”页面,点击“连接
❷
Eybond 2.4g
电气连接。 Wi-Fi PlugII - 02/10
登录 连接Wi-Fi数采器
W0016250020617 Wi-Fi数采器”按钮(安卓手机不需
③ 确认数采器各指示灯状态正常 Wi-Fi配置
Wifi-test
此步骤)。
Wifi111
(步骤2.3连网设置成功后,四灯 注册 ③ 找到与数采器PN号相同的Wi-Fi
常亮为正常)。 Wi-Fi PlugII - 07
❸ 示例电站 >
连网设置 连网诊断
进行连接(初始密码:12345678)。
❶ Wi-Fi配置 连网设置
方案1: 2.3 连网参数设置 请与无线路由器进行连接,确保远程数据传输
③ 断开2.2步骤所连接的数采器Wi-Fi 。
方案2: ④ 重新连接可上网的Wi-Fi热点或运营商网络。 连接Wi-Fi数采器
① 将数采器的2PIN绿色接头与逆变器的
RWP
MCC
TEN
VRS
RS-485端子对接。
② 将数采器的5PIN电源线与逆变器5PIN 设置
③ 用螺丝把数采器固定在逆变器上。
3. 注册账号与创建电站
❷ 注册
护光者 用户名
① 将数采器的4孔航空接头与逆变器的航 密码 3.1 账号注册
空接口对齐,插紧。 请输入用户名
确认密码
② 将数采器的螺帽与逆变器的螺杆拧紧。 请输入密码
记住密码
邮箱地址
① 在APP首页,点击“注册”按钮,
按提示填写相关信息,完成注册。
PWR
CCM
NET
SRV
手机号码
PN号
登录
采集器编码
Wi-Fi配置
注册
示例电站 > 完成
新建电站
新建电站
确定电站位置 创建电站
请输入电站名称
电站描述
RJ-45母插座对齐,插紧。 ② 点击右上角的“+”按钮,进入
电站图片
RWP
② 用螺丝把数采器固定在逆变器上。 到“创建电站”页面。 您还没有电站,
请添加电站!
MCC
③ 根据提示输入相关信息,完成电
VRS
TEN
电站图片
站创建。
完成
当前位置:深圳市宝安区
确定 取消
总览 列表 地图 我的
注意:一个账号可创建多个电站,一个电站可添加多个数采器,若您只有一个数采器,则不需此步骤。
3.3 添加多个数采器
❹ 电站名称
当前功率: 55.6kW
设备名称
设备类型
设备 P N:123456789
添加设备
添加数采器
① 点击已经建好的电站,进入该电站
① 将数采器的串口与逆变器的串口对齐, 日发电量: 141.6kWh
当日收益:¥158.2
当前功率:12.5kW
数采器上的PN号
364.3kWh 日发电量:12.5kWh
主界面。
插紧。
② 选择“设备”菜单,点击右上 角的
② 用螺丝把数采器固定在逆变器上。 PWR
CCM
NET
“+”按钮,进入到“添加数采器”
SRV
页面。
③ 扫描数采器的PN号,添加数采器;
手动输入数采器PN号 如果扫描不成功,可以手动输入。
总览 列表 地图 我的 信息 地图 数据 设备 告警
2. Wireless Router Connection
iOS Android
1. Installation
2018LA
① Open the APP, tap the Wi-Fi Config
button to enter this page.
according to the model of the Please enter password
W2015
PASSWORD
❶
Method 1 : Connected Network Settings
① Connect the 4PIN power cable of the Wi-Fi 2.3 Network Setting Please connect to the wireless router
② Fasten the Wi-Fi PlugII to the inverter with ① After the connection completes, tap the Please choose a Wi-Fi and connect. Password:
① Connect the 2 PIN green interface of the ③ Reconnect the Wi-Fi or Cellular Data
Wi-Fi PlugII to the RS-485 terminal of which can surf the Internet instead of the
the inverter. Wi-Fi connected by step 2.2. Setting
② Connect the 5PIN power cable of the Wi-Fi Network Setting Network Diagnose
Keep password
E-mail ① Open the APP, tap the Register button
② Tighten the nut of the Wi-Fi PlugII to PWR
CCM
NET
SRV
Wi-Fi Config
PN
② According to the prompts, type in the
information to create an account.
Register
Demo> Register
新建电站
Create Plant
新建电站
Location of the plant Create Plants
❸ 3.2 Create Plant Please enter the location of the plant Plant Name*
Plant description
① Align the RJ-45 crystal head of the Wi-Fi ① Login the account and click Please input the description the plant
PlugII with the inverter and insert it in tightly. the list button on the bottom
② Fasten the Wi-Fi PlugII to the inverter with of the home page. You don't have Plant picture
a plant yet.
VRS
TEN
MCC
RWP
the screw. ② Tap the “+” button on the top- Plant picture
Note: One account can create multiple plants and one plant can add multiple dataloggers. If you only have one
datalogger, you could ignore this step.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be
installed and operated with minimum distance of 20cm the radiator your body. This
device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.