Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 4

CALCULATION OF INDIVIDUAL PILE SETTLEMENT

From (m) To (m) Layer height(m) Avg Field SPT Soil RMR ES (kPa) -Rock ES (kPa) -Soil V
type(USCS)

0 3 3 7 Fill 3500 0.3


3 6 3 6 GM 3000 0.3
6 9 3 9 SC 4500 0.3
9 12 3 8 SP 4000 0.3
12 26.5 14.5 30 SC 15000 0.3
26.5 28 1.5 HWR 20 163097 - 0.25
28 29.5 1.5 SWR 28 243312 - 0.25
29.5 31 1.5 SWR 42 489970 - 0.25
31 32.5 1.5 SWR 52 807824 - 0.25
32.5 34 1.5 SWR 47 629134 - 0.25
34 35.5 1.5 FR 59 1146357 - 0.25
35.5 37 1.5 FR 59 1146357 - 0.25
37 38.5 1.5 26 FR 59 1146357 - 0.25

Weighted avg 231717 0.28


Es (Soil) 500×SPT(N) KPa Bowels(1996)
Es(Rock) 0.06×e^(0.05RMR) Gpa HK guidline or 300 Quc Mpa Hoek and Diederichs (2006) - Metamorphic (Gneiss)

Pier No = 66
Pile no = P3 , P4
BH no = PD -66-C2 A
Pile toe level = -36.197 m.MSL
Pile cut off level = -0.597 m.MSL
Embedded length of the pile( L ) = 35.6 m
Pile diameter(d) = 1.5 m
Diameter of End (db) = 1.5 m
Weigheted Average of Elastic modulus (Es) = 231717 kPa
Elastic modulus of end bearing stratum (Eb) = 1146357 kPa
Elastic modulus of pile (Ep) = 30000000 kPa
Weighted Average of poisson ratio (Vs) = 0.28
(RA) for solid pile = 1.00
Pile
Total depth of soil layers (h) settlement = 26.50 m
Total axial load on pile -SLS (P) = 17636 kN

From charts Io 0.075 db/d 1 L/d 24


Rk 1.85 K=(Ep×RA/Es) 129 L/d 24
Rb 0.95 L/d 24 Eb/Es 5
K 129
Rv 0.95 K 129 V 0.3

Pile settlement = 6.35 mm

Eq. 5-34 of Poulos and Davis, 1981 (Foundation analysis and design)
CALCULATION OF ULTIMATE LATERAL LOADS (Piles in Cohesionless soils)
INTRODUCTION
Ultimate lateral load on a single bored and cast-insitu pile is estimated using the method proposed by Broms
(Assumed as fixed head pile at pile cap level)

Hu
Pile cap
Pile
Ground elevation after scouring

Embedded length(L)

Ultimate lateral load is estimated using the method proposed by Broms for cohesionless soils
Fixed Head Single pile
(Ref: Allowable lateral load on single bored and cast insitu piles is estimated using method given
in 7.2.2.2 “ Pile Foundation Analysis and Design” by H G Poulos & E H Davis 1980)

Pier No = 66
Pile no = P3 , P4
BH no = PD -66-C2 A
Pile diameter = 1.5 m
Applied lateral load (Hsls) = 798 kN
Ultimate moment capacity of the pile (Mu ) = 6517 kNm
Embedded length of the pile, L = 35.6 m
Average of effective unit weight, y = 20 kN/m3
Average of effective unit weight, y' = 10.2 kN/m3
Average of friction angle of soil = 34.0 deg
KP = 3.537
LATERAL LOAD CAPACITY OF A FIXED HEAD PILE

Assume pile behave as a short pile,

HU = 102780 kN

Mmax = 2439308.386 kNm

Check Mmax < Myield = Mmax>Myield

Assume pile behave as a Intermediate pile,

HU = 34077 kN

f = 20.6 m

Mmax = 467686 kNm

Check Mmax < Myield = Mmax>Myield-Pile behave as a Long Pile

HU = 950 kN

Applied lateral load,H(SLS) = 798 kN


Ultimate lateral Capacity , HU = 950 kN
F.O.S = 1.2 > 1.5 Not satisfied
Settlement Chart A

You might also like