Professional Documents
Culture Documents
Application Instructions - FlexCut Nylon
Application Instructions - FlexCut Nylon
application instructions
FlexCut Nylon
Low temperature PU film, designed to be heat transferred to most coated fabrics (such as nylon fabrics).
Features:
1. Cut mirrored
PU 70µ Nylon and other 40°C
water- coated fabrics
based
Cutting conditions:
2. Weed design
Blade low/ 30 - 40 cm/s
30 - 45° medium
Transfer conditions:
3. Transfer design
115°C 15 s medium/ Cold peel
high
Flex on Flex possible
PA C K AG I N G
5 0 cm 25 m
5 0 cm 10 m
5 0 cm 5m
Store in a cool and dry place; protect against the influence of light when stored. We recommend not to exceed a storage period of 18 months. The technical specifications rest on
extensive tests and technical research. Due to the variety of possible influences during refinement, and use, the specifications should be viewed as reference values. We recommend a
suitability test on the original material. A legally binding warranty of specific characteristics cannot be derived from our specifications.
Red 10 Black 02
P 1945 C P Process Black C
Store in a cool and dry place; protect against the influence of light when stored. We recommend not to exceed a storage period of 18 months. The technical specifications rest on
extensive tests and technical research. Due to the variety of possible influences during refinement, and use, the specifications should be viewed as reference values. We recommend a
suitability test on the original material. A legally binding warranty of specific characteristics cannot be derived from our specifications.