Professional Documents
Culture Documents
A. Connecting PC Peripherals
A. Connecting PC Peripherals
A. Connecting PC Peripherals
Region XII
Division of South Cotabato
CEBUANO NATIONAL HIGH SCHOOL
Cebuano, Tupi, South Cotabato
1. Always disconnect a computer from the AC power and from any powered peripherals while you
are working on it.
2. Always grasp a metal part of the computer chassis with your bare hand before you touch
anything inside. Do this even if you are wearing an anti-static wristband.
3. Always handle electronic components by a non-conducting (non-metallic) edge. Don't touch the
pins or other connectors.
4. Always use a UL-approved surge protector or an Uninterruptible Power Supply that
incorporates surge and spike protection.
5. Never use an anti-static wrist strap when working on a computer (except when working on
monitors)
6. Everyone is allowed to eat, drink, or smoke while working on a computer.
7. Never plug an ATX power supply into AC power unless it is connected either to a computer's
motherboard or to a dummy test load.
8. Static electricity is the discharge of electricity between two objects with different electrical
potential.
9. Apron is a garment worn over the front of the body as a protection for one’s cloth.
10.PPE can also be used to protect the working environment from pesticide application, pollution
or infection from the worker.
T.III Multiple Choice: Read each question carefully and choose the letter of the best answer.
36. Which of the following is not a Windows XP minimum requirement?
a. 128MB RAM or higher c. Lower resolution monitor
c. CD- ROM or DVD ROM d. 4.3 GB hard disk space or more
37.If you see a message to press any key to boot the CD and you fail to do so, what do you think
will happen?
a. The computer will restart c.Set up inspecting your system will appear
b. It will be prompted to BIOS setup d. It will return to boot menu
38.What key should you press if you need to install any third- party or RAID drivers?
a. F2 b. F6 c. F2 d. F12
39. After reading the license agreement, what function key will press in order to start the
installation? A.F6 b. F8 c. F9 d. F12
40. Where do we typically install the operating system?
a. Drive C b. DVD c. External Drive d. Floppy Drive
41. What file system is usually used during installation?
a. FAT FAT32 c. NTFS d. NTFS32
42. Suppose that you will install Windows XP on a system with more than one 4 partition, what
important process should be done? 5
a. Change the file system
b. Delete the data and files on the different partition
c. Examine the partition
d. Format the correct partition
43When the folder copy phase is complete your system will reboot, what are you going to do if
see the message “Press any key to boot from CD”?
a. Press any key b. Do not press a key c. Reboot the system d. Eject the CD
44. What is the next phase after the set up folder copy phase and reboot?
a. GUI set up b. Software c. Username setup d. Software personalization
45. What phase will immediately follow the first boot phase?
a. Welcome to Windows b. Network Setup c. Change display setting d. Set up users