Professional Documents
Culture Documents
Design of Rectangular Beam (Limit State Method)
Design of Rectangular Beam (Limit State Method)
Design of Rectangular Beam (Limit State Method)
Ult BM & SF -120.0 KN-m 120.0 KN 150.0 KN-m 30.0 KN -225.0 KN-m 180.0 KN
Bottom Reinf.
Reinf. (Strength) 0.00 cm2 0.00% 7.47 cm2 0.62% 0.71 cm2 0.06%
Reinf. (Critical) 0.00 cm2 0.00% 7.47 cm2 0.62% 0.71 cm2 0.06%
Trials Dia 1 Nos. Dia 2 Nos. Dia 1 Nos. Dia 2 Nos. Dia 1 Nos. Dia 2 Nos.
Same dia bars 16 0 20 3
Mixed dia bars + + +
Shear
Section capacity 58.16 KN 64.47 KN 77.63 KN
Reqd. stirrup cap. 61.84 KN 0.00 KN 102.37 KN
Notes
1. Cells with yellow fill are for data input.
2. Data should be entered in specified units only.
1. Enter General data: fck, fy, cover to center of bars, beam width & beam depth
2. Enter ultimate BM and SF values at left support, midspan and right support
3. Top and bottom reinforcement required from the strength considerations as well
as critical reinforcement are displayed. Take trials with same dia or a mix of two
Sign Convention
Input Convention Description
Ultimate SF +ve