Professional Documents
Culture Documents
Design Hydrostatics Report Again
Design Hydrostatics Report Again
Designer
Created by
Comment
Filename tesa kapal.fbm
Design length 93.220 (m) Midship location 46.610 (m)
Length over all 98.750 (m) Relative water density 1.025
Design beam 16.580 (m) Mean shell thickness 0.0000 (m)
Maximum beam 16.580 (m) Appendage coefficient 1.0000
Design draught 5.420 (m)
Lateral plane
Lateral area 500.32 (m^2)
Longitudinal center of effort 48.696 (m)
Vertical center of effort 2.727 (m)
The following layer properties are calculated for both sides of the ship
Sectional areas
Location Area Location Area Location Area Location Area Location Area
(m) (m^2) (m) (m^2) (m) (m^2) (m) (m^2) (m) (m^2)
0.000 2.573 18.644 66.917 37.288 86.053 55.932 83.101 74.576 46.799
4.661 19.638 23.305 75.056 41.949 86.352 60.593 78.721 79.237 34.929
9.322 41.890 27.966 81.339 46.610 86.216 65.254 70.290 83.898 23.332
13.983 56.383 32.627 84.679 51.271 85.249 69.915 58.837 88.559 12.762
11/23/2014 Page 1
Design hydrostatics report
Sectional areas
85.0
80.0
75.0
70.0
65.0
60.0
55.0
50.0
Area (m^2)
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0
NOTE 1: Draught (and all other vertical heights) is measured above base Z=
NOTE 2: All calculated coefficients based on project length, draught and beam.
11/23/2014 Page 2