Download as pdf or txt
Download as pdf or txt
You are on page 1of 71

Author's master class from the group

Affordable Creativity

Jasmine - spring girl

Knitting master class


miniature knitted doll
(knitting description, hook)
Materials and tools for work:
Videos on materials

✅ Knitting yarn 100% cotton. I


have this:
Doll: yarnart canarias (5303, peach color)
Composition 100%: Cotton. The weight of the skein is 20 g. The length
of the thread is 203 m. Hair: wool of angora goat, llama, hair dye.
Jeans: yatnart canarias, color 4917
Blouse: yarnart canarias, color 1000 Belt:
thin brown threads.

MK from the Accessible Creativity group


Materials and tools for work:
Chamomile wreath:
Yarnart canarias yarn (white 1000, green 5352).
Mouline thread is light yellow.
The thinnest floral wire 2-3pcs Yellow beads

Ready stamens

Wreath with lilac flowers:


Yarnart canarias yarn (burgundy 0112, purple
6309, lingonberry 4931)

MK from the Accessible Creativity group


Materials and tools for work:
✅ Filler for stuffing (synthetic fluff or holofiber)
✅ Wire for the frame: copper, cross-section 1.5
mm., Chenille wire for handles.
✅ Belt buckle or polymer clay.
✅ Hook corresponding to the thickness of the yarn chosen
for knitting (I have 0.7)
For clothes and flowers hook 0.5.
✅ A thread of peach floss, white and burgundy for the mouth,
brown for the eyebrows.
For the peephole: Ready eyelashes.
✅ Buttons with 4 holes 1 cm in diameter = 4 pcs.
✅ Glue Moment gel, PVA, needle, scissors, nippers,
shadows or dry pastels and a tinting brush, tweezers
and sticks for filling with filler,

The height of the finished toy from these materials is 9 cm sitting,


17 cm in full height.

four

MK from the Accessible Creativity group


Abbreviations used:
KA - ring amigurumi sbn.
- single crochet
ss - connecting post
approx. - an increase (we knit 2sc in 1 loop) ssn -
a column with a crochet
ss2n - a column with two crochets
kill - decrease (2 columns for one vertex)
ch. - air loop
pshn - lush column pp
- lifting loop
ps - connection loop
pst - half-column

Difficulty level: above average


Jasmine crochet seamy side to the front side.

five

MK from the Accessible Creativity group


I would like to ask you:
1. If in the published stage it is written that there is a
video, watch it! I understand that many girls are
experienced, but the video can make your work easier
and avoid possible mistakes)
2. Do not rush, it is better slowly, but efficiently
3. Knit only with new, straight threads.
4. Make imperceptible decreases
5. Fill the doll with small portions of the filler.
6. The doll is knitted on the wrong side! It is necessary!

Light loops and good mood!


6

MK from the Accessible Creativity group


FOOT, SHIN
(description + video )

Left:
Peach yarn
Row 1: chain of 5 ch
Row 2: from the second from the loop hook 3 sbn, 4 sbn in one
loop, 3 sbn = 10
Row 3: (4 sc, prib) x 2 = 12
Row 4: 12 sc
Row 5: kill, 10 sc = 11
Row 6: 11 sc
Row 7: 9 sc, dec = 10
Row 8 - 9: 10 sc
Row 10: 7 sc, 2 pribs for the back half loops (heel), 1 sc = 12

MK from the Accessible Creativity group


Row 11: 7 sc, prib, 2 sc, prib, 1 sc = 14
Row 12: 14 sc
Row 13: 8 sc, 2 dec, 2 sc = 12
Row 14: 7 sc, 2 dec, 1 sc = 10

We cut off the wire about 9 cm, bend it as in the


photo. We insert the frame, fill the foot a little at the
place of takeoff and heel.

Row 15: 4 sbn, 3 kill = 7


Row 16: 5 sc, prib, 1 sc = 8
Row 17 - 21 (5 rows): 8 sc

28

MK from the Accessible Creativity group


Change the thread to blue and continue to knit the shin.
Row 22: 8 sc
Row 23: 7 sc, arr = 9
Row 24: 9 sc
Row 25: 7 sc, prib, 1 sc = 10
Fill with filler as you knit.

29

MK from the Accessible Creativity group


Row 26: 10 sc
Row 27: 7 sc, prib, 2 sc = 11
Row 28 - 29: 11 sc
Row 30: 7 sc, prib, 3 sc = 12
Row 31 - 32: 12 sc
Row 33: kill, 6 sc, 2 kill = 9 (back off)
Row 34 - 37: 9 sc

Cut off the frame. We insert a bead into the knitted


hole of a suitable size. We knit further, making
decreases, thereby tying the bead to the end. Cut
the thread, hide.

210

MK from the Accessible Creativity group


Right:
Peach yarn
Row 1: chain of 5 ch
Row 2: from the second from the loop hook 3 sbn, 4 sbn in one
loop, 3 sbn = 10
Row 3: (4 sc, prib) x 2 = 12
Row 4: 12 sc
Row 5: kill, 10 sc = 11
Row 6: 11 sc
Row 7: 2 sc, dec, 7 sc = 10
Row 8 - 9: 10 sc
Row 10: 2 sc, 2 pribs for the back half loops (heel), 6 sc = 12
211

MK from the Accessible Creativity group


Row 11: 2 sc, prib, 2 sc, prib, 6 sc = 14
Row 12: 14 sc
Row 13: 3 sc, 2 dec, 7 sc = 12
Row 14: 2 sc, 2 dec, 6 sc = 10

We cut off the wire about 9 cm, bend it as in the


photo. We insert the frame, fill the foot a little at the
place of takeoff and heel.
Row 15: 2 sc, 3 dec, 2 sc = 7
Row 16: 3 sc, prib, 3 sc = 8
Row 17 - 21 (5 rows): 8 sc
Change the thread to blue and continue to knit the shin.
Row 22: 8 sc
Row 23: 3 sc, prib, 4 sc = 9
Row 24: 9 sc
Row 25: 4 sc, prib, 4 sc = 10

Fill with filler as you knit Row 26: 10 sc

Row 27: 5 sc, prib, 4 sc = 11


Row 28 - 29: 11 sc
Row 30: 6 sc, prib, 4 sc = 12
Row 31 - 32: 12 sc
Row 33: 3 sc, 3 dec, 3 sc = 9 (back off) Row
34 - 37: 9 sc

Cut off the frame. We insert a bead into the knitted


hole of a suitable size. The holes of the bead should be
on the sides of the leg. We knit further, making
decreases, thereby tying the bead to the end. Cut the
thread, hide. 212

MK from the Accessible Creativity group


HIP
(description + video )

Blue thread (2 identical parts)

Row 1: 6 sc in the spacecraft


Row 2: (1 sc, prib) x 3 = 9
Row 3: (2 sc, prib) x 3 = 12
Row 4: (5 sc, prib) x 2 = 14
Row 5 - 10 (6 rows): 14 sc

We select the diameter of the button for the hole in the thigh.
We put in a strong thread.
We introduce the hook from the outside, stepping back from the
edge of 5 rows, grab the button threads and stretch them.

13

MK from the Accessible Creativity group


Row 11 - 12: 14 PRS
Row 13: 6 sc, dec, 6 sc = 13
Row 14 - 24 (11 rows): 13 sc

It is not too tight to fill the thigh, so as not to swell. Knit


another 4 sbn, cut off the thread, leaving the long end.

214

MK from the Accessible Creativity group


CONNECTING THE THIGH AND THE SHIN

( VIDEO )

fifteen

MK from the Accessible Creativity group


216

MK from the Accessible Creativity group


LINING THE BOTTOM OF JEANS

(description + video )

With blue thread: starting from the back, from the side of the heel. We
introduce the hook into the edge where the thread color change begins,
grab the working thread and pull it out. Next, we knit in a circle along
the leg.
Row 1: 1 VP, 7 SBN = 8
Row 2: 2 sbn, arr, 4 sbn, arr = 10
Row 3: 10 sbn
Row 4: 1 sc, prib (behind), 8 sc = 11
Row 5: 10 sc, 1 sc

17

MK from the Accessible Creativity group


218

MK from the Accessible Creativity group


PENS
(description + video RIGHT HANDLE )

Right palm:
We start knitting with the index finger, finish with the
little finger.
Chain of 6 ch, 5 cs along the chain (index)
Without cutting off the thread we knit 7 ch, 6 cs along the chain
(middle) 6 ch, 5 cs along the chain (unnamed)
5 VP, 4 ss along the chain (little finger)

nineteen

MK from the Accessible Creativity group


Row 1: ch 1, on the other side: in the half-loops of each
finger we knit 3 times, 2 sbn.
On the other side: in the half-loop of the base of the fingers we knit
2 times 2 sbn and 1 sbn in the base of the little finger = 12 sbn

Row 2: 12 sc
Row 3: 8 sbn, 5 VP, 4 ss along the chain (thumb), 4 sbn = 12

Row 4: 8 sc, (skip the thumb), 4 sc = 12


Row 5: 2 ub (side), 2 sbn, 2 ub (near the thumb), 2 sbn =
8
Fill your palm with filler.

220

MK from the Accessible Creativity group


Row 6: 4 sc, dec, 2 sc = 7
Row 7: 7 sc
Row 8: arr, 6 sbn = 8
Row 9 - 20 (12 rows): 8 sc
Row 21: 1 sc, prib, 2 sc, prib, 3 sc = 10
Row 22: 2 sc, 2 ub, 4 sc = 8
Row 23 - 25: 8 sc
Row 26: 2 sc, prib, 5 sc = 9
Row 27 - 29: 9 sc
Row 30: arr, 3 sbn, arr, 4 sbn = 11
Row 31 - 34: 11
Knit another 4 sc offsets to the inside of the arm, 1 ss.

Cut the thread.

221

MK from the Accessible Creativity group


(description + video LEFT HANDLE )

Left palm:
We start knitting with the little finger, finish with the
index finger.
A chain of 5 ch, 4 cs along the chain (little finger) Without
cutting off the thread, we knit 6 ch, 5 cs along the chain
(unnamed)
7 VP, 6 ss along the chain (medium)
6 VP, 5 ss along the chain (index)

Row 1: ch 1, on the other side: in the half-loops of each


finger we knit 3 times, 2 sbn.
On the other side: in the half-loop of the base of the fingers we
knit 2 times 2 sbn and 1 sbn in the base of the index finger =
12 sbn
Row 2: 12 sc
Marker near the index finger.
Row 3: 11 sbn, 5 VP, 4 ss along the chain (thumb), 1 sbn
= 12
Row 4: 11 sc (skip the thumb), 1 sc = 12 Row 5: kill, 2
sc, 2 kill, 2 sc, kill = 8
Fill your palm with filler.
Row 6: 6 sc, dec = 7
Row 7: 7 sc
Row 8: 3 sc, prib, 3 sc = 8
Row 9 - 20 (12 rows): 8 sc
Row 21: 1 PRS, Prib, 4 PRS, Prib, 1 PRS = 10

222

MK from the Accessible Creativity group


Row 22: dec, 6 sc, dec = 8
Row 23 - 25: 8 sc
Row 26: 1 sc, prib, 6 sc = 9
Row 27 - 29: 9 sc
Row 30: 3 sc, arr, 4 sc, arr = 11 Row
31 - 34: 11
Knit the required amount of offset sc to the inner
side of the arm, 1 cc.
Cut the thread.

223

MK from the Accessible Creativity group


BODY + LEG FIXING
(description + 2 videos) FASTENERS BODY

Important ❗ In the first video, where I fasten the legs at the


very beginning, I made a reservation that we begin to fasten by
knitting 11 rows ... WE NEED TO KNIT 13 rows! Knit 13 rows over
the text description and start watching the video!

Blue thread:
Row 1: We knit a chain of 6 in., From the second loop from the
hook: approx, 3 sc, 4 sc in one loop, 5 sc on the other side =
14
Row 2: 2 arr, 1 sbn, arr, 1 sbn, 4 arr, 1 sbn, arr, 1 sbn,
2 arr = 24
Knit about 6 sb of offset, put a marker. It should be in the
middle of the back. Always keep an eye on the marker!

Row 3: 3 sbn, arr, 4 sbn, arr, 6 sbn, arr, 4 sbn, arr, 3 sbn
= 28
Row 4: (4 sc, prib) x 2, 8 sc, (prib, 4 sc) x 2 = 32
Row 5: (5 sc, prib) x 2, (2 sc, prib) x 2, 2 sc, (prib, 5 sc)
x 2 = 38
Row 6: 14 sc, (approx, 2 sc) x 3, approx, 14 sc = 42
Row 7 - 11:42 sc
Marker in the center of the back!
Row 12: (5 sc, dec) x 2, 14 sc, (dec, 5 sc) x 2 = 38
Row 13: 38 sc
24

MK from the Accessible Creativity group


We fix the legs! ( see video )

To do this, you need to count from the edge of the first row (chain
of 6 VP) 9 or 10 rows to the side, put a pin. Using a crochet hook,
pull the threads of the legs into the body. Check that the leg is
seated correctly. We thread the threads into the button located
from the inside of the body. Make sure that the threads were
threaded into the second button in the same order as in the first. To
do this, it is enough to pull the thread and then it will become clear.
We tie the threads in pairs and very tightly into several knots.

We fix the second leg in the same way.

MK from the Accessible Creativity group


Row 14: (4 sc, dec) x 2, 14 sc, (dec, 4 sc) x 2 = 34
Row 15: 1 sc, 2 dec, 24 sc, 2 dec, 1 sc = 30

Change the thread to a flesh-colored thread.


Row 16: 30 sc
Row 17: 7 sc, dec, 12 sc, dec, 7 sc = 28
Row 18 - 24 (7 rows): 28 sc

Lightly fill the bottom and bottom.

Row 25: 9 sbn, 4 arr, 2 sbn, 4 arr, 9 sbn = 36


Row 26 - 29: 36 sbn
Row 30: 5 sc, 3 sc with a handle, 10 dec, 3 sc with a handle, 5 sc = 26

Row 31: 5 sc, 8 sc on the handle, 10 sc, 8 sc on the handle, 5 sc = 36

226

MK from the Accessible Creativity group


Prepare the wire frame. Watch the video! Its length
and thickness will depend on the size of your doll. (I
have a length of 30 cm, section 1.5)
Bend the frame in half, twist it and insert it into the body,
fill the body tightly with filler, thereby securing the frame
in the center.

Insert the frame into the handles, secure in the body frame.

227

MK from the Accessible Creativity group


Row 32: 4 sc, dec, 6 sc, dec, 8 sc, dec, 6 sc, dec, 4 sc = 32 Row
33: (1 sc, dec) x 2, 3 sc, (dec, 1 sc) x 4 , ub, 3 sbn, (ub, 1 sbn) x 2
= 23
Row 34: 5 kill, 3 sbn, 5 kill = 13
Row 35: 2 sc, 2 sc, 1 sc, 2 sc, 2 sc = 9

If you have a thick wire neck screw, cut 1 wire, leaving


one. Look at the latest photos, where the wire is
sticking out of an already tied neck, or at the very end
of the video. Row 36 - 44: 9 sc (neck)

228

MK from the Accessible Creativity group


BLOUSE
(description + video )

Sleeve (2 parts):

A chain of 4 chs, leaving a 10cm thread for


sewing.
We knit in pivoting rows from the second loop from
the hook as follows:
Row 1 - 12 row: 3 sbn behind the back wall of the loop of the
previous row, in the ascent, turn the product. It turns out an
elastic band. Try on the doll.
Close knitting in a circle, knit along the edge 12 sb.

Row 13: (1 sbn, arr) x 6 = 18


Row 14: (3 sc, arr) x 2, 2 sc, (3 sc, arr) x 2 = 22 Row
15: 22 sc
Row 16: (6 sc, prib) x 3, 1 sc = 25
Row 17 - 22 (6 rows): 25 sc Row 23:
(6 sc, dec) x 3, 1 sc = 22 Row 24: 22
sc
Row 25: (5 sc, dec) x 3, 1 sc = 19
Row 26 - 28: 19 sc
Finish ss.

29

MK from the Accessible Creativity group


BASE OF THE JACKET
We knit from the bottom up.
A chain of 4 chs, leaving a 10cm thread for
sewing.
We knit in pivoting rows from the second loop from
the hook as follows:
Row 1 - 36 row: 3 sbn behind the back wall of the loop of
the previous row, in the ascent, turn the product. It turns
out an elastic band. Try on the doll just above the waist.

Close knitting in a circle.

230

MK from the Accessible Creativity group


Row 1: knit along the edge 36 sc.
Row 2: (5 sc, prib) x 6 = 42 Row 3:
42 sc
Row 4: (6 sc, prib) x 6 = 48
Row 5 - 7:48
Row 8: 8 sbn, 6 sbn with loops of the right sleeve, 20 sbn in
front, 6 sbn with loops of the left sleeve, 8 sbn = 48
Row 9: 8 sc, 13 sc on the right sleeve, 20 sc in front, 13 sc
on the left sleeve, 8 sc = 62

Put a jacket on the doll, gently pushing the handles into the
sleeves. Next, we knit directly on the doll.

Row 10: (2 sc, dec) x 5, 1 sc, (dec, 2 sc) x 2, 2 sc, (dec, 2


sc) x 2, dec, 1 sc, (dec, 2 sc) x 5 = 47
Row 11: (1 sbn, ub) x 7, 5 sbn, (ub, 1 sbn) x 7 = 33

Finish ss. Sew the edges of the cuffs.

231

MK from the Accessible Creativity group


232

MK from the Accessible Creativity group


JEANS BELT
With brown yarn we knit a chain of 4 VP. We knit in
pivoting rows from the second loop from the hook, 3 sbn
= 46 rows. The length of the belt should
match the length of the hem of the jeans at the waist.

Polymer clay buckle (see photo)

Thread the belt through the buckle, put it on the doll and sew the edges.
We embroider loops under the belt with blue thread (see photo)

33

MK from the Accessible Creativity group


234

MK from the Accessible Creativity group


HEAD
(description + video )

The head is knitted from the bottom up, that is, from the neck
to the crown. Fill your head with filler as you knit. Pay special
attention to your cheeks. Fill your head tightly!

Row 1: 2 ch, 5 sc in the first loop = 5 Row


2: approx x 5 = 10
Row 3: approx x 10 = 20
Row 4: (1 sc, prib) x 10 = 30
Row 5: we knit a chain of 6 VP, skip 4 loops of the previous
row and into the fifth: (2 sbn, prib) x 8, 2 sbn, 3 sbn along the
chain from cp = 39

We put a marker! This will be the middle of the back of the head.
We never move the marker again!

35

MK from the Accessible Creativity group


Row 6: 3 sc on a chain from VP, prib, 3 sc, prib, 24 sc,
(prib, 3 sc) x 2 = 44
Row 7: 44 sbn
Row 8: (approx, 2 sc) × 6, sc, 3 dec, sc, (2 sc, approx) × 6 = 53
Row 9: (4 sc, approx) × 2 times, 32 sc, (approx, 4 sc ) × 2 times,
sc = 57
Row 10: 57 sc
Row 11: 28 sc, arr, 28 sc = 58
In the next row, the spout will be knitted.
Row 12: 28 sc, 6 sc in 1 loop, 29 sc = 63
Row 13: 28 sc, 3 dec (for the front half loops), 29 sc = 60
Row 14: 17 sc, 5 dec, sc, 2 dec, sc, 5 dec, 17 sc = 48 Row 15:
23 sc, dec, 23 sbn = 47
Row 16: 16 sc, (approx, 6 sc,) x 2, approx, 16 sc = 50
Row 17: 8 sc, (approx, 10 sc) x 3, approx, 8 sc = 54 Row
18: 54 sc
Row 19: (8 sc, prib) x 6 = 60
Row 20 - 24 (5 rows): 60 sc
To drip inside the nose glue gel (if you will shape the
nose), not current IMPORTANT! and use pliers to form a
nose.

MK from the Accessible Creativity group


Row 25: (8 sc, dec) × 6 = 54
Row 26: (7 sc, dec) × 6 = 48
Row 27: (6 sc, dec) × 6 = 42
Row 28: (5 sc, dec) × 6 = 36
Row 29: (4 sc, dec) × 6 = 30
Row 30: (3 sc, dec) × 6 = 24

Fill your head very tightly with filler, pushing with a


stick into the cheeks and chin. Form knitted head
bumps.

Row 31: (2 sc, dec) × 6 = 18


Row 32: (1 sc, dec) × 6 = 12
Make 5 more kills, leaving the hole open. Cut the
thread, hide it in the head.

Along the edge of the neck hole, dial 10 sc and knit


about 5 rows. Turn the resulting tube inside your head,
helping yourself with a wooden stick.

237

MK from the Accessible Creativity group


238

MK from the Accessible Creativity group


LETTING OUT EARS
(description + video )

The ears are located at the level of the nose, at a distance


of 16 columns. Count 16 tbsp for the left ear. We put a pin.

We introduce the hook from the side of the face, stepping back from
the pin 1 column, grab the thread, knit 1 VP.
Then, a row above, we knit 2 double crochets in one loop.
Using a needle, we pull the thread into a loop (from where 2
ssn were knitted), then insert the needle into the loop from the
hook and tighten the thread, but not tight.
Confused? Better watch the video, everything is easier there)))

39

MK from the Accessible Creativity group


Right ear.
We count 16 columns from the spout to the left and put a pin,
but shift it one more row higher. We again insert the needle
into the upper base of the ear and bring it out to the place
where the pin of the right ear is located.
We introduce the hook from the side of the face, stepping back from
the pin 1 column, grab the thread, knit 1 VP.
Then in the same loop we knit 2 double crochets in one loop. We
step back 1 row and introduce a needle with a thread, tightening
the eyelet according to the same principle as the left one. Cut the
thread, hide it in the head.

240

MK from the Accessible Creativity group


LIP EMBROIDERY
(photo + video )

41

MK from the Accessible Creativity group


242

MK from the Accessible Creativity group


FASTENING A HEAD TO BODY

(The head is spinning. Watch the video )

We take a long needle (more than the length of the doll's head)
and thread a very strong thread into it.
I have a doll from yarnart canarias, I inserted exactly this
thread. Cut the thread long, about 60 - 70 cm. In two folds. If
the thread is thick, you can do it in 1 addition. Pierce the neck
as in photo 1. Pull the thread.

MK from the Accessible Creativity group


Cut, fold the two double ends, and thread the needle
back into the eyelet.
Insert the needle with threads into the hole in the head under
the neck. Lead into the hole at the top of the head. Remove the
needle. Use a screwing motion to fit the head to the desired
neck length. Don't go too long or too short.

Tie the threads at the top of your head. Push the threads into the hole in
the head.

244

MK from the Accessible Creativity group


245

MK from the Accessible Creativity group


COLOR HAIR
I painted with the most inexpensive estel paint.
I spread the dry strands on a bag, applied the mixture
evenly with a brush (you can use a toothbrush). Shake the
strands properly, close with a package. Leave on for 20
minutes, periodically checking for uniformity of staining.

Rinse under running water with shampoo, apply hair


balm. Just spread out on a towel and leave to dry.

I didn't comb the strands to keep the curls.

MK from the Accessible Creativity group


ADHESIVE HAIR
(watch the video)

47

MK from the Accessible Creativity group


248

MK from the Accessible Creativity group


249

MK from the Accessible Creativity group


CLOSED EYES
(description + video )

The length of each ciliary band is approximately 5-6 columns.


The distance between the eyes is 6 columns. Mark with a brown
pencil the place where the eyelashes will be glued. Lubricate
the very edge of the tape with moment-crystal glue and glue
the cilia with tweezers and a needle.

EYEBROWS
Find the center between the eyes and go up 6 rows.
At this level, the eyebrows will be located with a
distance of 7 columns. We put the pins.

We count to the sides for 4 tbsp and 1 row down. We put the pins.
We embroider the eyebrows in these places with a simple stitch
with a thread close to the hair color.

fifty

MK from the Accessible Creativity group


251

MK from the Accessible Creativity group


WATER EYES
PENCILS
( VIDEO )

DOWNLOAD EYE TEMPLATE

52

MK from the Accessible Creativity group


FIXATION OF HANDS
( video )
Here you will need:
PVA glue
pliers or round nose pliers

53

MK from the Accessible Creativity group


Toning
(video)
You will need:
eyeshadow or dry pastel and tinting brush

54

MK from the Accessible Creativity group


Wreath of chamomiles

Chamomile ( video )

Materials and tools for work:


1. Very fine knitting yarn. I have this: YARNART
CANARIAS, 100% MERCERIZED COTTON, 20 g 203 m

Color: white (1000)


Mouline thread is pale yellow.
2. Floristic wire is the thinnest
3. Glue moment crystal
4. Hook 0.5

Chamomile Center Description:


Row 1: 5 sc in KA Row
2: approx x 5 = 10 Row
3: 10 sc
Cut the thread.

55

MK from the Accessible Creativity group


Wreath of chamomiles

Spring Flower Description + video :

Flower diameter - 1 cm
Materials and tools for work:
1. Very fine knitting yarn. I have this: YARNART
CANARIAS, 100% MERCERIZED COTTON, 20 g 203 m

Color: white (1000)


2. Floristic wire is the thinnest
3. Glue moment crystal
4. Hook 0.5
5. Round yellow beads, the smallest
6. Fine brush, yellow acrylic paints, water.

56

MK from the Accessible Creativity group


Row 1: 5 sc in spacecraft
Row 2: (2 VP, 2 SSN, 2 VP, 1 SS) x 5

Flowers (painting, assembly)


Tie the required number of flowers.

257

MK from the Accessible Creativity group


Pour water into a bowl, immerse the flowers in it, take them out
and spread them wet on the table.

Dilute yellow acrylic paint with water. The water


should be slightly tinted.

258

MK from the Accessible Creativity group


Dampen a thin brush with tinted water. Apply a brush
to the center of the flower. The paint runs a little.
Leave to dry.

When the flowers are dry, we start assembling. Cut the


floristic wire into 3 - 4 cm pieces.

259

MK from the Accessible Creativity group


Insert into the center of the flower, grease the tip of the wire with
crystal moment glue.
Insert yellow beads on the tip.

Pull the beaded wire to the flower.

260

MK from the Accessible Creativity group


Wreath of chamomiles
Description of leaves:
Green yarn
A chain of 12 VP, from the second loop from the hook along the
chain: 1 ss, 2 ss, 5 pssn, 2 ss, 1 ss
Without cutting off the thread we knit 10 VP, from the second loop from the
hook along the chain: 1 ss, 2 sbn, 4 pssn, 1 sbn, 1 ss
Without cutting off the thread, we knit a chain of 23 VP. Cut the thread.

Tie the required number of double leaves. I have 6.

Be sure to completely wet them with water, straighten


the leaves. With PVA glue, saturate a chain of 23 VP. Allow
to dry.

61

MK from the Accessible Creativity group


262

MK from the Accessible Creativity group


ASSEMBLING THE CHAMOMILE WREATH

( video )

63

MK from the Accessible Creativity group


64

MK from the Accessible Creativity group


Lilac wreath
Materials and tools for work:
1. Yarn yarnart canarias (burgundy 0112, purple
6309, lingonberry 4931)
2. Hook 0.5

See the description of the flower VIDEO

Just do not fasten the wire, just leave the threads


about 5 cm long.

65

MK from the Accessible Creativity group


I knitted a chain of 84 VP (it is equal to the circumference of the head). From
the second loop from the hook along the chain: 83 sb, sew the edges.

Fasten the flowers simply by threading them by the threads, tie them
into knots, cut the threads. Fasten the flowers one after another.

266

MK from the Accessible Creativity group


267

MK from the Accessible Creativity group


268

MK from the Accessible Creativity group


In conclusion, take a look video

269

MK from the Accessible Creativity group


270

MK from the Accessible Creativity group


Our lovely Jasmine
ready!

Pinterest
IN contact
Instagram
Arts and crafts fair
Youtube
Etsy
71
MK from the Accessible Creativity group

You might also like