The document summarizes the results of stress and deflection analyses for various components. The stress analysis shows the calculated long-term and short-term stresses for braces, panel flanges, panel surfaces, and skid base materials compared to the allowed stress limits. All components were found to be under the allowable stresses. The deflection analysis also shows calculated long-term and short-term deflections for skid base materials compared to allowed deflection limits, with all found to be within the allowed deflections.
The document summarizes the results of stress and deflection analyses for various components. The stress analysis shows the calculated long-term and short-term stresses for braces, panel flanges, panel surfaces, and skid base materials compared to the allowed stress limits. All components were found to be under the allowable stresses. The deflection analysis also shows calculated long-term and short-term deflections for skid base materials compared to allowed deflection limits, with all found to be within the allowed deflections.
The document summarizes the results of stress and deflection analyses for various components. The stress analysis shows the calculated long-term and short-term stresses for braces, panel flanges, panel surfaces, and skid base materials compared to the allowed stress limits. All components were found to be under the allowable stresses. The deflection analysis also shows calculated long-term and short-term deflections for skid base materials compared to allowed deflection limits, with all found to be within the allowed deflections.
Stress(kgf/㎠) Allowance(kgf/㎠) Result Item Position Long Term Short Term Long Term Short Term Long Term Short Term 3mH 778.5 1,435.6 1,600.0 2,400.0 OK OK Brace 2mH 945.3 1,490.8 1,600.0 2,400.0 OK OK (Internal STAY) 1mH 1,501.3 2,177.0 1,600.0 2,400.0 OK OK F1, F2 417.1 621.4 1,600.0 2,400.0 OK OK Panel Flange F3 970.9 1,432.7 1,600.0 2,400.0 OK OK (Steel) F4 1,509.8 2,040.3 1,600.0 2,400.0 OK OK F1, F2 24.6 36.7 212.0 318.0 OK OK Panel Surface F3 56.7 83.6 212.0 318.0 OK OK (GRP) F4 96.8 130.8 212.0 318.0 OK OK Material (A) 567.6 731.5 1,600.0 2,400.0 OK OK Skid Base Material (B) 283.8 365.7 1,600.0 2,400.0 OK OK Material (C) 1,026.4 1,322.7 1,600.0 2,400.0 OK OK
8-2. Deflection Analysis
Stress(kgf/㎠) Allowance(kgf/㎠) Result Item Position Long Term Short Term Long Term Short Term Long Term Short Term Material (A) 0.035 0.045 0.250 0.250 OK OK Skid Base Material (B) 0.017 0.022 0.250 0.250 OK OK Material (C) 0.134 0.172 0.175 0.175 OK OK * for Material C, the length of both sides supporting point has to be maximum 700mm.