Professional Documents
Culture Documents
Test Data Sheet: Date of Sampling Date of Testing
Test Data Sheet: Date of Sampling Date of Testing
Test Data Sheet: Date of Sampling Date of Testing
METHOD: The test involves straining a test piece by tensile force, generally to fracture for the purpose of determining
one or more of the mechanical properties. The Standard nethod for the tensile testing determines the mechanical properties
at ambient temperature ( 10° C to 35 ° C).
TESTED BY CHECKED BY
Page 1 OF 1
BEND TEST DATA SHEET
IS:1599
Format No. F01(5.4) Issue Date : 01.01.2020
LAB CODE 25881 Date of Sampling 26.04.201
Dia of Bars 32 Date of Testing 27.04.2021
2. PRINCIPLE:-. The bend test consists of submitting a test. piece of round, square, rectangular, or polygonal cross section to plastic
deformation by bending, without changing the direction of loading, until a specsed angle of bend is reached.
The axes af the two legs of the test piece remain h a plane perpendicular to the axis of bending. In the case of 180° bend, the two lateral
surfaces may, depending on the requirements of the material. standard, lie flat against each other or may be parallel at a specified distance,
an insert being used to control this distance.
Angle of Bend
5 α °
180
Reported ovserved Results
7 Cracks / No Cracks NO CRACKS OBSERVED
TESTED BY CHECKED BY
Page 1 OF 1
Date of Sampling
8 10 12 16 20 25 32
Dia of specimen
2 a mm 32
Diameter of mandrel
3 D mm 192
Remarks:- Fe 500D
TESTED BY CHECKED BY
Page 1 OF 1
Date of Sampling
8 10 12 16 20 25 32