Professional Documents
Culture Documents
BMW E Series CIC Retrofit Coding Guide
BMW E Series CIC Retrofit Coding Guide
Hi,guys!This article show you guide step by step on how to retrofit BMW E series CIC coding.Here
I take BMW E89 as example,but this method applies to all BMW E series.Hope it is helpful!
read VO
note: avoid Process car as it programs every module (RISKY), and not needed
EXCUTE JOB again to make sure FA_WRITE and correct module selected
coding done!!
now to make sure the coding went well in the new VO and the CAS, FRM/ NFRM
press VIN/ZSC/FA
press ENTER FA
!! check build date #0909 and &6VA you added just now
press ENTER FA
select CHASSIS: E89
!! check build date #0909 and &6VA you added just now
now to default coding the CIC unit to recognise your cars features, such as AS PDC, Bluetooth…
press VIN/ZSC/FA
press BACK
note:
the CIC unit will reboot and load up with all of your options
note: