Professional Documents
Culture Documents
Anti-Terra-U Anti-Terra-U 100 Anti-Terra-U 80 BYK-W 966 Disperbyk-101
Anti-Terra-U Anti-Terra-U 100 Anti-Terra-U 80 BYK-W 966 Disperbyk-101
Issue 07/11
Composition
ANTI-TERRA-U 100 Salt of unsaturated polyamine amides and lower molecular weight acidic polyesters
ANTI-TERRA-U
Solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters
ANTI-TERRA-U 80
BYK-W 966 Solution of a salt of unsaturated polyamine amides and acidic polyesters
DISPERBYK-101 Solution of a salt of long chain polyamine amides and a polar acidic ester
Typical Properties
19 24 0.94 50 25
ANTI-TERRA-U
Solvents: Xylene/Isobutanol 8/1
30 40 0.99 80 66
ANTI-TERRA-U 80
Solvents: Butylglycol
19 26 0.87 52 38
BYK-W 966
Solvents: Hydrocarbons
14 30 0.90 52 35
DISPERBYK-101
Solvents: White spirit/Butylglycol 8/1
Values indicated in this data sheet describe typical properties and do not constitute specification limits.
Data Sheet W212
Issue 07/11
Recommended Levels
ANTI-TERRA-U
1-2 0.5 - 1 1-5 30 - 50
DISPERBYK-101
The above recommended use levels are strongly dependent on pigment particle size. Optimal levels may be determined with
a ladder series in the laboratory.
Applications
ANTI-TERRA-U –
ANTI-TERRA-U 100 –
ANTI-TERRA-U 80 –
BYK-W 966 –
DISPERBYK-101
recommended suitable
Function
These additives deflocculate pigments through steric stabilization of the pigments. Due to the small particle sizes of the
deflocculated pigments, high gloss is achieved and color strength improved. Additionally, transparency and hiding power
are increased. These products reduce viscosity, subsequently, leveling is improved and higher pigment loading is possible.
Page 2
Data Sheet W212
Issue 07/11
ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and
ANTI-TERRA-U
architectural coatings. It can also be utilized to provide excellent gelling in organophilic bentonites.
ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U, the standard wetting and
dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to
provide excellent gelation of organophilic bentonites.
ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and
ANTI-TERRA-U 100
inorganic.
No adverse effect has been observed on the pot-life of two-component systems or on the dry time
of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive
in water soluble coatings.
ANTI-TERRA-U 80 is the high solids version of ANTI-TERRA-U and therefore especially suitable for
ANTI-TERRA-U 80
solvent-free, high solids or amine-neutralized aqueous systems.
DISPERBYK-101 has a broad application field similar to that of ANTI-TERRA-U. Additionally it can
DISPERBYK-101 be used to stabilize transparent iron oxides in wood stains. DISPERBYK-101 can also be used to gel
bentonites.
Special Note
The use of DISPERBYK-101 in clear coats which contain water may lead to a slight brown
DISPERBYK-101
discoloration.
ANTI-TERRA-U
ANTI-TERRA-U 100 Separation or turbidity may occur during storage and transportation. Mix well before use.
ANTI-TERRA-U 80 Warm to 30-60°C and mix well.
BYK-W 966
Page 3
Data Sheet W212
Issue 07/11
BYK-Chemie GmbH ANTI-TERRA®, ATEPAS®, BYK®, BYK®-DYNWET®, BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®, BYKOPLAST®, BYKUMEN®, DISPERBYK®,
P.O. Box 10 0245 DISPERPLAST®, ISAROL®, LACTIMON®, NANOBYK®, SCONA®, SILBYK® and VISCOBYK® are registered trademarks of BYK-Chemie.
46462 Wesel AQUACER®, AQUAMAT®, AQUATIX®, CERACOL®, CERAFAK®, CERAFLOUR®, CERAMAT®, CERATIX®, HORDAMER® and MINERPOL® are registered
Germany trademarks of BYK-Cera.
Tel +49 281 670-0
Fax +49 281 65735 This information is given to the best of our knowledge. Because of the multitude of formulations, production and application conditions, all the above
mentioned statements have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from
info@byk.com this fact for individual cases.
www.byk.com/additives
This issue replaces all previous versions - Printed in Germany