Professional Documents
Culture Documents
Quaction For Revsion
Quaction For Revsion
Quaction For Revsion
JE Foundation
MCQ Questions Lec - 8
16 January / 02:00PM
Join Telegram :
Click the Link: civilbyShubhamsir
Help Contact
Number
9650052904
Mentor - Shubham Aggarwal
ABOUT ME : SHUBHAM AGGARWAL
▪ 4+ Years of Experience
▪ Email: Shubham.aggarwal@gradeup.co
Answer : B
[ESE : 2006]
Answer : B
[ESE : 1997]
Answer: D
Codes: A B C D
37. Match List-I with List-II and select the
correct answer using the codes given A. 2 5 3 4
below the lists:
B. 5 1 2 3
List-I List-II
A. The innermost part or core of 1. Transverse septa C. 5 3 2 1
the stem of a tree (medullary rays)
B. The vascular tissue which 2. Annual rings
D. 5 1 4 3
encloses the pith
Answer: B
C. A cellular tissue and woody 3. The cambium layer
fibre arranged in distinct
concentric circles
D. The thin layer below the bark 4. The outermost cover or
not converted into sapwood skin of the stem
as yet
5. Medulla (pith)
[ESE : 1998]
Join Telegram : civilbyShubhamsir Mentor - Shubham Aggarwal
SHEAR Timber
STRESS DISTRIBUTION
Answer: C
Answer: B
Answer: A
Answer: A
Codes: A B C D
44. Match List-I (Name of defect) with List-II
(Definition) and select the correct answer A. 1 2 3 4
using the codes given below the lists:
B. 4 3 2 1
List-I List-II C. 1 3 2 4
A. Cupping 1. Caused by wood limbs encased by the
wood of the free trunk D. 4 1 2 3
B. Bowing 2. Caused by grain irregularities in the board
and can be eliminated by proper stacking
Answer: D
C. Chucks 3. Small cracks appearing at the ends of
boards caused by too rapid drying
D. Knots 4. Unequal shrinking in the radial and
tangential direction
Explaination:
The fused mass turns into nodular forms of size
3mm to 20mm known as clinkers.
Explaination:
The amount of gypsum is about 3 - 5% by
Weight of Clinkers to prevent flash setting of
the cement. It also improves the soundness od
cement.
Explaination:
Aelite > Belite > Celite > Felite
C3S > C2S > C3A > C4AF
Q7. During Hydration Process C3S and C2S react with water to form
a) Calcium silica Hydrate (C-S-H)
b) Calcium Hydroxide [Ca(OH)2]
c) Both
d) None of the Above
Q7. During Hydration Process C3S and C2S react with water to form
a) Calcium silica Hydrate (C-S-H)
b) Calcium Hydroxide [Ca(OH)2]
c) Both
d) None of the Above
Explaination :
2C3S + 6H C3S2H3 + 3Ca(OH)2
2C2S + 4H C3S2H3 + Ca(OH)2
Explaination:
The only advantage of calcium hydroxide is that
being alkaline in nature it maintains pH value
around 13 in the concrete which resist the
corrosion of reinforcements.
Explaination:
The heat of Hydration of Low-Heat Cement for
• 7 days shall not be more than 65 calories/gm
• 28 days shall not be more than 75 calories/gm
Explaination:
An Acid resistant cement is composed of the following:
1. Acid Resistant Aggregates such as Quartz, Quartzites, etc.
2. Additive such as Na2[SiF6] this accelerates hardening.
3. Solution of Sodium Silicates or Soluble Glass
Q11. The Portland cement with low C3A and C4AF and ground finer than
OPC is known as
a) Low Heat Cement
b) Portland Blast Furnance Cement
c) Sulphate Resisting Cement
d) Super Sulphated Cement
Q11. The Portland cement with low C3A and C4AF and ground finer than
OPC is known as
a) Low Heat Cement
b) Portland Blast Furnance Cement
c) Sulphate Resisting Cement
d) Super Sulphated Cement
Explaination:
The Portland cement with low C3A and C4AF and ground finer
than OPC is known as Sulphate Resisting Cement.
Explaination:
The White Cement is the same as OPC but the amount of iron
oxide which is responsible for greyish colour is limited to less
than 1%.
Q14. Which compound is added in white cement to act as a flux for the
hydration process
a) Cryolite
b) Sodium fluorosilicate
c) Calcium Chloride
d) Alumina
Q14. Which compound is added in white cement to act as a flux for the
hydration process
a) Cryolite
b) Sodium fluorosilicate
c) Calcium Chloride
d) Alumina
Explaination:
Sodium Alumino Ferrite Na3AlF6 (Cryolite) is added to
act as flux in the absence of iton oxide in white
cement.
Explaination:
Whiteness of white is measured on :
Hunters Scale on which whiteness should not be less 70%
ISI Scale on which whiteness should not be less 90%
Explaination:
0.1 - 0.4% of Stearic Acid or Oelic Acid is added to cement to
make it hydrophoic cement.
Explaination:
Chlorides : 500mg/L for R.C.C. Work
2000mg/L for P.C.C. Work
Explaination:
It is the ratio of lime & silica and Alumina & Iron Oxide which
shall be not be greater than 1.02 and not less than 0.66
Q24. Select cement out of the following which may be used in mass
concrete construction?
I. Low heat Portland cement
II. Portland blast furnace slag cement
III. Portland pozzolana cement
IV. Rapid hardening Portland cement
The correct answer is
(a) Only I
(b) I and II
(c) I,II and III
(d) All
Q24. Select cement out of the following which may be used in mass
concrete construction?
I. Low heat Portland cement
II. Portland blast furnace slag cement
III. Portland pozzolana cement
IV. Rapid hardening Portland cement
The correct answer is
(a) Only I
(b) I and II
(c) I,II and III
(d) All
Q33. Snowcem is
(a) Colored cement
(b) Powdered lime
(c) Chalk powder
(d) Mixture of chalk power and lime
Q33. Snowcem is
(a) Colored cement
(b) Powdered lime
(c) Chalk powder
(d) Mixture of chalk power and lime