Professional Documents
Culture Documents
Captive Works CW800 PVR: S/W Installation Guide Using Serial Cable
Captive Works CW800 PVR: S/W Installation Guide Using Serial Cable
CW800 PVR
S/W Installation Guide
Using Serial Cable
By: mrokarvi
1) Connect your PC and receiver with twisted RS-232C Null modem cable.
2) Plug in the power supply cord of your receiver to the power source and leave
your receiver turned OFF.
3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the
software using "Standby" Mod go to #4. Standby Mod is recommended method to load bin file
because it is faster and safe.
6) Press File Icon beside File Box and select the Latest bin file you downloaded from the Company
website “CW800V1.XX_date.bin".
Now Press Open or Press Enter key on your keyboard to load file in your loader.
You can see in this picture, file is loaded in the Loader program.
LED screen on your receiver will change to A ####s and then Writing. Finally you will see “–End”.
Congratulations!! Your receiver is upgraded and now you can use all new features available for your
receiver.
If you experience any problem during the upgrade start over again.