Professional Documents
Culture Documents
Specification: Actuator For Smoke Damper
Specification: Actuator For Smoke Damper
Specification: Actuator For Smoke Damper
Dimensions
A
D
Dimension Inches Metric (mm)
A 1.50 38.1
B 3.26 82.8
C 6.60 167.5
D 3.01 76.4
C
B
Caution
We strongly recommend that all neptronic® products be wired to a separate transformer and that transformer shall service only neptronic® products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System U.S.A. Patent #5,278,454
BT-X4/060303 1
Actuator for smoke damper
BT060/160/260/080/180/280X4 Specification & Installation instruction
Mechanical installation
Wiring Diagrams
Power supply - 2 wire / 2 position (ON-OFF) Auxiliary switches (only on models BT080/180/280X4)
3
NEUTRAL (-) Contact closed at 5° +/-5°
2
DRIVE CW
SUPPLY (+)
1
Common
Warning for BT160/260/180/280X4:
High Voltage. Risk of electric chock.
PC Board
Rotation direction Jumper
FIRE DAMPER
R.1.0
3
2
1
VOLTAGE
!!! HIGH
TB2
Switches terminal only on
models 080, 180 & 280 Rotation direction
direct CW (0 to 90°)
JP1 JP2
Rotation direction
jumpers
Rotation direction
reverse CCW (90 to 0°)
Terminal JP1 JP2
TB1 1 2
Stroke adjustment
To adjust the stroke, move the adjustment screws at the desired position.