Professional Documents
Culture Documents
Engineering Graphics - 1 Personal Advice
Engineering Graphics - 1 Personal Advice
SAMEER SULTAN
ENGINEERING GRAPHICS – 1
PERSONAL ADVICE
A huge confusion to every one is that what pencil should be used for what.
2H- Object Lines (Outlines), Dotted lines, section plane, dimension lines, leader lines, extension
lines. (The Shade varies for each.)
Those who have gone through the ND Bhatt book, don’t worry guys, you don’t have to measure
each and everything. But, it should look the same as given in the book.
Capital letter O, Q, and the numbers 0 and 8 shoud be made of perfect circles.
07/08/2018
SAMEER SULTAN
A border of 20 has to be given to the top, bottom and the right edges. The right border is 30.
NOTE:- All the dimensions will be given like how it has been given in the above picture.
We’d have to calculate either one of the dimensions. Here, the total height and width has
been split up and given.
The drafter works under parallel beams mechanism. The scale would be at the same position that
you fixed irrespective of the movement of the drafter arms.
Use is as a normal scale. To draw a vertical line, use the vertical scale and to draw horizontal lines
use the horizontal scale. (I know, it is obvious.)