The document outlines additional requirements for above ground lift stations in the City of Hamilton in addition to Montana DEQ Circular 2, Chapter 40 standards. It specifies that the bottom edge of any mounted sign must be at least 6 feet above grade. It presents two preferred methods for sign bases: a simple "pit" sign base or using a 5-gallon bucket. It also provides details for detectable warnings, requiring them to extend the full width of any curb ramp plus an additional two feet in length placed three inches from the back of the curb.
The document outlines additional requirements for above ground lift stations in the City of Hamilton in addition to Montana DEQ Circular 2, Chapter 40 standards. It specifies that the bottom edge of any mounted sign must be at least 6 feet above grade. It presents two preferred methods for sign bases: a simple "pit" sign base or using a 5-gallon bucket. It also provides details for detectable warnings, requiring them to extend the full width of any curb ramp plus an additional two feet in length placed three inches from the back of the curb.
The document outlines additional requirements for above ground lift stations in the City of Hamilton in addition to Montana DEQ Circular 2, Chapter 40 standards. It specifies that the bottom edge of any mounted sign must be at least 6 feet above grade. It presents two preferred methods for sign bases: a simple "pit" sign base or using a 5-gallon bucket. It also provides details for detectable warnings, requiring them to extend the full width of any curb ramp plus an additional two feet in length placed three inches from the back of the curb.
The document outlines additional requirements for above ground lift stations in the City of Hamilton in addition to Montana DEQ Circular 2, Chapter 40 standards. It specifies that the bottom edge of any mounted sign must be at least 6 feet above grade. It presents two preferred methods for sign bases: a simple "pit" sign base or using a 5-gallon bucket. It also provides details for detectable warnings, requiring them to extend the full width of any curb ramp plus an additional two feet in length placed three inches from the back of the curb.
LIFTSTATION REQUIREMENTS In Addition to Montana Department of Environmental Quality Circular 2, Chapter 40 The Following is Required: BOTTOM EDGE OF BOTTOM EDGE OF MOUNTED SIGN MOUNTED SIGN
SIMPLE "PIT" 5-GALLON BUCKET
SIGN BASE SIGN BASE ( PREFERRED METHOD ) DETECTABLE WARNING SEE 20.04.010
THE DETECTABLE WARNING
SHALL EXTEND THE FULL WIDTH OF THE CURB RAMP BY TWO (2') FEET IN LENGTH/DEPTH PLACED THREE (3") INCHES MAXIMUM FROM THE BACK OF CURB