This document provides rating data for a heat exchanger unit. It includes specifications for the unit such as surface area, number of shells, fluid types and properties on the shell and tube sides. It also provides performance data like heat exchanged, transfer rate and temperatures in and out. Finally, it describes the construction of the shell including design pressures and temperatures, tube details, materials and weights.
This document provides rating data for a heat exchanger unit. It includes specifications for the unit such as surface area, number of shells, fluid types and properties on the shell and tube sides. It also provides performance data like heat exchanged, transfer rate and temperatures in and out. Finally, it describes the construction of the shell including design pressures and temperatures, tube details, materials and weights.
This document provides rating data for a heat exchanger unit. It includes specifications for the unit such as surface area, number of shells, fluid types and properties on the shell and tube sides. It also provides performance data like heat exchanged, transfer rate and temperatures in and out. Finally, it describes the construction of the shell including design pressures and temperatures, tube details, materials and weights.
Type AEW Orientation Horizontal Connected In 1 Parallel 1 Series Surf/Unit (Gross/Eff) 7.12 / 6.93 m2 Shell/Unit 1 Surf/Shell (Gross/Eff) 7.12 / 6.93 m2 PERFORMANCE OF ONE UNIT Fluid Allocation Shell Side Tube Side Fluid Name gas proses gas pendingin Fluid Quantity, Total kg/s 1.6500 0.7300 Vapor (In/Out) wt% 100.0 100.0 100.0 100.0 Liquid wt% 0.0 0.0 0.0 0.0 Temperature (In/Out) C 159.00 130.00 25.00 76.20 Density kg/m3 12.429 11.775 16.441 14.123 Viscosity mN-s/m2 0.0153 0.0157 0.0116 0.0125 Specific Heat kJ/kg-C 2.1505 2.1360 1.8530 1.8970 Thermal Conductivity W/m-C 0.0430 0.0430 0.0280 0.0310 Critical Pressure kPa Inlet Pressure kPa 1498.99 1498.99 Velocity m/s 5.00 3.02 Pressure Drop, Allow/Calc kPa 749.497 11.162 749.497 1.597 Average Film Coefficient W/m2-K 599.08 227.95 Fouling Resistance (min) m2-K/W 0.000125 0.000155 Heat Exchanged 0.0863 MegaWatts MTD (Corrected) 93.4 C Overdesign 0.05 % Transfer Rate, Service 133.34 W/m2-K Calculated 133.41 W/m2-K Clean 138.58 W/m2-K CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation) Shell Side Tube Side Design Pressure kPaG 0.000 0.000 Design Temperature C 307.09 mm
No Passes per Shell 1 1
Flow Direction Downward Connections In mm 1 @ 102.261 1 @ 77.927 1.4 m
Size & Out mm 1 @ 102.261 1 @ 77.927
Rating Liq. Out mm @ @ Tube No. 85 OD 19.050 mm Thk(Avg) 1.828 mm Length 1.400 m Pitch 23.813 mm Layout 90 Tube Type Plain Material 304 STAINLESS STEEL (18 CR, 8 NI) Pairs seal strips 0 Shell ID 307.087 mm Kettle ID mm Passlane Seal Rod No. 0 Cross Baffle Type PERPEND. SINGLE-SEG. %Cut (Diam) 25.00 Impingement Plate None Spacing(c/c) 175.000 mm Inlet 418.433 mm No. of Crosspasses 5 Rho-V2-Inlet Nozzle 3247.26 kg/m-s2 Shell Entrance 2405.49 Shell Exit 2539.09 kg/m-s2 Bundle Entrance 290.33 Bundle Exit 306.45 kg/m-s2 Weight/Shell 541.45 Filled with Water 681.60 Bundle 112.02 kg Notes: Thermal Resistance, % Velocities, m/s Flow Fractions Shell 18.92 Shellside 5.00 A 0.403 Tube 76.15 Tubeside 3.02 B 0.286 Fouling 3.59 Crossflow 8.46 C 0.293 Metal 1.34 Window 11.94 E 0.018 F 0.000