Professional Documents
Culture Documents
Sugino Servo Self Feeder Drill Heads
Sugino Servo Self Feeder Drill Heads
300
SERVO series
Highly rigid and long stroke(up to mm) drill unit
with compact size.Variety of models available for
wide ranges of machining requirements.
selfeeder servo series is a high-precision CNC controlled
drilling unit capable to drill newly developed material and
exotic material.
High quality servo motor for feed and precise ball screw
designed eliminate the feed rate fluctuation
of feed speed by drilling force; less burr generation for
through hole drilling and longer tool life.
High precision, high efficiency, less space and cost
reduction that are critical for the machining operation
can be gained with this selfeeder servo series.
2
Selfeeder Varimec
A new generation model of Selfeeder Mechatric that has high rigidity to
Aluminium Steel
make a high performance with compact body.
φ 8.5 φ 6.5 SSV2 ・・・・・・・・ 4p
Linear guide
20,000min -1
(JP PAT.) Aluminium Steel
Multi-spindle Light &
φ 12 φ 8 SSV3 ・・・・・・・・ 6p
heads attachable Compact
Aluminium Steel
Spindle speed
Long stroke φ 16 φ13 SSV4 ・・・・・・・・ 8p
variable type
Aluminium Steel
Small dia. and
deep hole drilling
Large dia.
drilling φ 25 φ18 SSV5 ・・・・・・ 10p
Selfeeder Mechatric
Multi functionable basic unit featured with higher torque for large hole
Aluminium Steel
drilling and coolant center through etc.
φ 16 φ11 SSM4 ・・・・・・ 12p
Multi-spindle Spindle speed
heads attachable variable type Aluminium Steel
φ 24 φ19 SSM5 ・・・・・・ 14p
Small dia. and
Long stroke
deep hole drilling
Aluminium Steel
Large dia. Coolant φ 14 φ10 MS3P ・・・・・
16p
drilling center-through
Aluminium Steel
Round
shaped body
Linear guide
φ 40 φ28 MS7 ・・・・・・・
17p
Aluminium Steel
Spindle speed 4-spindle
variable type Turret φ 20 φ13
Aluminium Steel 4TH5 ・・・・・・ 20p
Rigid tapping
M 16 M12
3
SERVO series
SERVO series
Selfeeder Varimec
Max. Drilling size (mm)
SSV2
Linear guide
20,000min-1
(JP PAT.)
Aluminium
8.5
Light & Spindle speed
φ Compact variable type
Steel
φ 6.5
2,000∼
SSV2-7200 ER11MS 0.5∼7.0 5 4 3.5
20,000 0.9 0.4
Max. 15,000min-1/hr. AC Max. Max.
1,200 15
80 DC brushless servo 200 16.7
390∼ motor motor
SSV2-1039 ER16 0.5∼10.0 8.5 7.5 6.5
3,900
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
4. In the case of a servo motor with a holding brake (optional), add B to the end of the model number.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
Signaling cable
SSV2-1039 for feed motor
ER16 41
Mounting spindle
54 LS cable
Power cable
86.5
SSV2-7200
4
+0.03
ER11
+0.03 4-φ9
80 60 80 Spindle motor
Mounting spindle
85 27 24 25 125
Full stroke
100 51 165 80
Full stroke 5
80 347 (14.5)
Machine zero point
Note: Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
4
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
φ50
φ19
φ50
φ22
Sugino supplies adjustable spindle noses
varimec
other than those shown below, upon request.
25 30
Selfeeder
SSV2-7200 1 KH-12E
Notes1. Spindle noses KH-E model are applicable to the quick change stub holder of KH-A or KH-E model of NT Tool Co.,Ltd.
SSV2-1039 2 KH-14E 2. Quick change stub holder can not use in over 15,000min-1 spindle speed operation.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
other attachments
⑭ Varimec SSV2
⑮ Noise filter
⑯ PC cable A (option) ・・・・・・・・・・・・・・・・・ 2m
19 ⑰ Feed motor/LS leading cable ・・・・・・・ 3m
Laptop computer
(prepared by customers) 17 18 ⑱ Spindle motor leading cable ・・・・・・・ 0.5m
⑲ Terminal box for relay
16 7 Power supply for spindle
6 Connector Three-phase AC200V
5 ∼
Notes1. The feed controller and the spindle inverter are standard accessories.
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑯ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
211
225
Weight/2.1kg 32 32
ⅠN7 JOG− ※1 Voltage: DC24V, Electric current: 10mA
ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
Backward side OT
※1 NC No contact terminal
Input
Dimensions(mm) 2-φ5 34 13.2
ⅠN10 Alarm clear
ⅠN11 EXT/MANUAL
7
ⅠN15 Program 4
ⅠN16 Program 8
ⅠN17 Program 10
ⅠN18 Program 20
Dimensions (mm)/ 5
7
30.2
W116×D195.7×H255 (116) ⅠN19 Program 40
Weight/3.2kg ⅠN20 Program 80
5
SERVO series
SERVO series
Selfeeder Varimec
Max. Drilling size (mm)
SSV3
Linear guide
10,000min-1
(JP PAT.)
Aluminium
12
Multi-spindle Light &
φ heads attachable Compact
Spindle speed
Long stroke
variable type
Steel
φ 8 Small dia. and
deep hole drilling
Short length, compact sized unit capable to drill small diameter and deep holes.
Well suited unit for designing/producing low cost and flexible drilling machine.
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
ER11 0.5∼7.0
1,000∼
SSV3-7100 6.5 5 4
10,000 0.4 0.4
ER20 0.5∼13.0
Max. DC AC Max. Max.
1,660 43
200 brushless servo 200 16.7
ER20 0.5∼13.0
265∼ motor motor
SSV3-1626 12 9 8
2,650
ER25 0.5∼16.0
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
4. In the case of a servo motor with a holding brake (optional), add B to the end of the model number.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
ER25 Mounting spindle
φ39
φ80
17
Width across flat 32 46 34
80
140 ER20 Mounting spindle Feed motor 206
φ32
φ80
φ80
φ19
Appropriate tube
70
102
6
+0.03
10 0 Power cable for
Air outlet for cooling spindle motor
33 34 52 216 4-φ11 spindle motor (5m)
cooling spindle motor 116
Full stroke 67 67 186
136 200 570 CS sensor/LS cable for
spindle motor (5m)
Machine zero point
Note: Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
6
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
φ80
φ28
φ80
φ39
varimec
other than those shown below, upon request.
30 35
Applicable selfeeder Fig. No. Spindle nose model No.
Selfeeder
SSV3-7100 1 KH-14AR Fig. 1 KH-14AR Fig. 2 KH-25A
SSV3-1626 2 KH-25A Notes: Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
other attachments
by customers)
⑭ PC cable A (option) ・・・・・・・・・・・・・・・・・ 2m
5
Laptop computer 6
(prepared by customers) 3
14 Power supply for spindle
2 Three-phase AC200V
13 ∼
Notes1. The feed controller and the spindle inverter are standard accessories.
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑭ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
211
225
Weight/2.1kg 32 32
ⅠN7 JOG− ※1 Voltage: DC24V, Electric current: 10mA
ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
Backward side OT
※1 NC No contact terminal
Input
Dimensions(mm) ⅠN10 Alarm clear
105 ⅠN11 EXT/MANUAL
48 43 (9.5)
3-M4 4.5 ⅠN12 Manual spindle ON/OFF
for fixing
ⅠN13 Program 1
ⅠN14 Program 2
ⅠN15 Program 4
140min.
150
ⅠN16 Program 8
ⅠN17 Program 10
ⅠN18 Program 20
Dimensions (mm)/
W105×D148×H150 ⅠN19 Program 40
Weight/1.5kg ⅠN20 Program 80
7
SERVO series
SERVO series
Selfeeder Varimec
Max. Drilling size (mm)
SSV4
Linear guide Multi-spindle
(JP PAT.) heads attachable
Aluminium
φ 16 Spindle speed
variable type
Long stroke
Steel
φ 13
Model which has most suitable body structure for doing stepped spot-facing or burnishing drill operations.
Also it is possible to do more high-efficient processing
when you use this drill unit with multi-spindle heads.
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
1,000∼
SSV4-2070 9 8 7
7,000 1.2
1.0
Max. AC Max. Max.
ER32 1.0∼20.0 DC brushless 4,600 80
250 servo 220 16.7
motor
250∼ motor
SSV4-2017 16 15 13
1,750
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
4. In the case of a servo motor with a holding brake (optional), add B to the end of the model number.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
(195) 178
(188) 66.5
Feed motor
spindle motor 10 0
Air outlet for 15 30 160 100
Notes1. In the case of a servo motor with a holding brake (optional), the dimension of the feed motor is different.
2. Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
8
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ100
φ100
φ42
φ54
other than those shown below, upon request.
30 55
Applicable selfeeder Fig. No. Spindle nose model No.
Selfeeder
SSV4-2070 1 KH-22A Fig. 1 KH-22A Fig. 2 KH-32A
SSV4-2017 2 KH-32A Notes: Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
Standard accessories User control panel ① Power cable (UC-82) ・・・・・・・・・・・・・・ 0.7m
Programming console ② Power cable for feed motor ・・・・・・・・・・ 5m
15 12 13 DC24V
PC-03B ③ Signaling cable for feed motor ・・・・・・ 5m
other attachments
⑭ Varimec SSV4
⑮ Noise filter
⑯ PC cable A (option) ・・・・・・・・・・・・・・・・・ 2m
6
Laptop computer 7
(prepared by customers) 2
16 Power supply for spindle
3 Three-phase AC200V
5 ∼
Notes1. The feed controller and the spindle inverter are standard accessories.
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑯ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
Output COM Ground of command for spindle speed OUT1 Cycle run
ⅠN0 Emergency stop OUT2 Program end
ⅠN1 Manual coolant ON/OFF OUT3 Origin
※2
245
261
275
※1 NC No contact terminal
Input
Dimensions(mm) 2-φ5 34 13.2
ⅠN10 Alarm clear
ⅠN11 EXT/MANUAL
7
ⅠN15 Program 4
ⅠN16 Program 8
ⅠN17 Program 10
5 ⅠN18 Program 20
Dimensions (mm)/
7
30.2
W116×D195.7×H255 (116) ⅠN19 Program 40
Weight/3.2kg ⅠN20 Program 80
9
SERVO series
SERVO series
Selfeeder Varimec
Max. Drilling size (mm)
SSV5
Linear guide Multi-spindle
(JP PAT.) heads attachable
Aluminium
φ 25 Spindle speed
variable type
Long stroke
Large dia.
drilling
Steel
φ 18
High-power model which has 1.6kW spindle motor and 7,700N thrust.
It is capable of end-mill, facing or 28mm diameter drilling operations into
steel material utilizing a unique linear guide system (JP PAT.).
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
800∼
SSV5-2055 ER32 1.0∼20.0 14.5 11.5 9.5
5,500 2.7
1.6
Max. AC Max. Max.
DC brushless 7,760 100
300 servo 300 16.7
motor
150∼ motor
SSV5-2610 ER40 2.0∼26.0 25 20.5 18
1,010
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
4. In the case of a servo motor with a holding brake (optional), add B to the end of the model number.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
(φ150)
φ63
φ120
φ50
SSV5-2055
ER32 +0.03
20
+0.03
10 0 Mounting spindle 19 220 10 0
Air outlet for cooling
6
Notes1. In the case of a servo motor with a holding brake (optional), the dimension of the feed motor is different.
2. Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
10
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ120
φ59
other than those shown below, upon request.
Selfeeder
SSV5-2055 Fig. 1 KH-32A
1 KH-32A
SSV5-2610 Notes: Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
other attachments
(prepared by customers)
⑭ PC cable A (option) ・・・・・・・・・・・・・・・・・ 2m
5
Laptop computer 6
(prepared by customers) 2
14 Power supply for spindle
3 Three-phase AC200V
13 ∼
Notes1. The feed controller and the spindle inverter are standard accessories.
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑭ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
2-φ5
51 12 57
Analog ORD Command for spindle speed OUT0 RDY
7
Output COM Ground of command for spindle speed OUT1 Cycle run
17.4
261
275
Output
ⅠN3 Machine zero return OUT5 Ready for single step
ⅠN4 Single step OUT6 Coolant ON
ⅠN5 Spindle alarm OUT7 Forward sideON
Dimensions (mm)/
5 ⅠN6 JOG+ OUT8 Alarm
W133.2×D216×H275 40.5
Weight/5.2kg ⅠN7 JOG− ※1 Voltage: DC24V, Electric current: 10mA
ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
Backward side OT
※1 NC No contact terminal
Input
Dimensions(mm) 182
ⅠN10 Alarm clear
160±1 2-R3.5 Long hole ⅠN11 EXT/MANUAL
ⅠN12 Manual spindle ON/OFF
1
ⅠN13 Program 1
ⅠN14 Program 2
235±1
ⅠN15 Program 4
272.4
257
ⅠN16 Program 8
ⅠN17 Program 10
ⅠN18 Program 20
Dimensions (mm)/
7 7
ⅠN19 Program 40
9
W182×D177×H272.4
15.4
11
SERVO series
SERVO series
Selfeeder Mechatric
Max. Drilling size (mm)
SSM4
Multi-spindle Spindle speed
heads attachable variable type
Aluminium
16
Small dia. and Coolant
φ deep hole drilling center-through
Steel
φ 11
Most suitable unit for doing small diameter and deep hole drilling. The spindle rotation speed is easily adjusted in the program.
It can utilize coolant center-through tooling specification as an option for doing more high-efficient processing.
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
Dimensions (mm)
Spindle motor
149 106 668
Feed motor
365
Depth of
ER25 tool shank
φ50g6
57
φ60
φ42
20
Coolant input
70
NPT1/4
(φ76)
6
6
30 186 30 53
41 9 141 9
30
45
56
45
30
45.5 150
Note: Rotary joint is included in the standard supply for coolant center-through specification.
12
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
φ32.4
φ47
φ28
φ47
φ60
φ60
Sugino supplies adjustable spindle noses
varimec
other than those shown below, upon request. 27.5 51.5
45 20 69 20
65 89
95 119
Applicable selfeeder Fig. No. Spindle nose model No.
Selfeeder
SSM4-1673、SSM4-1636 1 KH-16A Fig. 1 KH-16A Fig. 2 KH-22A
SSM4-1618、SSM4-1608 2 KH-22A Notes: Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
other attachments
⑭ Power cable for spindle motor (prepared
by customers)
⑮ PC cable A (option) ・・・・・・・・・・・・・・・・・ 2m
Laptop computer 2
(prepared by customers) 3
15 5
Power supply for spindle
6 Three-phase AC200V
14 ∼
Notes1. The feed controller and the spindle inverter are standard accessories.
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑮ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
211
225
Weight/2.1kg 32 32
ⅠN7 JOG− ※1 Voltage: DC24V, Electric current: 10mA
ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
Backward side OT
※1 NC No contact terminal
Input
Dimensions(mm) φ5 67±0.5
ⅠN10 Alarm clear
ⅠN11 EXT/MANUAL
ⅠN12 Manual spindle ON/OFF
ⅠN13 Program 1
ⅠN14 Program 2
110±1
120
ⅠN15 Program 4
ⅠN16 Program 8
ⅠN17 Program 10
ⅠN18 Program 20
Dimensions (mm)/ 5
9
13
SERVO series
SERVO series
Selfeeder Mechatric
Max. Drilling size (mm)
SSM5
Small dia. and
Long stroke
deep hole drilling
Aluminium
24
Large dia. Coolant
φ drilling center-through
Linear guide
Steel
φ 19
High-precision and high-rigidity unit which uses united structure of spindle unit and slide table.
It offers high-efficient deep hole drilling because of 300mm long stroke and coolant center-through system.
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
SSM5-2641BCL 4,100 4,900 8 4 4
2.2
SSM5-2634BCL 3,400 4,000 9 5 5
Induction motor
SSM5-2625BCL 2,500 3,000 12 6 6
SSM5-2621BCL 2,100 2,500 10 5 5 2.7
Max. AC Max. Max.
SSM5-2617BCL 1,700 2,000 ER40 Max.26 12 6 6 1.5 5,000 230
300 servo 300 16.7
SSM5-2611BCL 1,100 1,300 16 9 8 Induction motor motor
SSM5-2607BCL 700 850 19 14 12.5
SSM5-2604BCL 400 480 19 15 13.5 0.75
SSM5-2602BCL 220 260 24 21 19 Induction motor
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
4. Holding brake is attached to the feed motor.
5. Coolant center-through is used for SSM5 as standard specification. Please direct if you do not need it.
6. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
ER40
Mounting spindle
Width across flat 55
510
φ138
φ63
Coolant input
NPT1/4
210
14
Adjustable spindle nose (option) Dimensions(mm)
Selfeeder
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ138
φ53
other than those shown below, upon request.
25
Applicable selfeeder Fig. No. Spindle nose model No.
98
Selfeeder
SSM5-26※※BCL 1 KH-32EC
Fig. 1 KH-32EC
Notes: Spindle noses KH-EC model is applicable to the quick change stub holder of KH-EC model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
2-φ5
51 12 57 ⅠN0 Emergency stop OUT0 RDY
7
261
275
Output
ⅠN5 Spindle alarm OUT5 Ready for single step
ⅠN6 JOG+ OUT6 Coolant ON
ⅠN7 JOG− OUT7 Forward sideON
Dimensions (mm)/
5 ⅠN8 Forward side OT OUT8 Alarm
W133.2×D216×H275 40.5
Weight/5.2kg Backward side OT
ⅠN9 (Combine with origin LS) ※1 Voltage: DC24V, Electric current: 10mA
NC No contact terminal ※2 Voltage: DC24V, Electric current: 90mA
※1
Input ⅠN10 Alarm clear
ⅠN11 EXT/MANUAL
ⅠN12 Manual spindle ON/OFF
ⅠN13 Program 1
ⅠN14 Program 2
ⅠN15 Program 4
ⅠN16 Program 8
ⅠN17 Program 10
ⅠN18 Program 20
ⅠN19 Program 40
ⅠN20 Program 80
15
SERVO series
SERVO series
Selfeeder Mechatric
Max. Drilling size (mm)
MS3P
Multi-spindle Small dia. and
heads attachable deep hole drilling
Aluminium Alu
φ 14 Round
shaped body
φ
Steel S
φ 10 φ
Most suitable unit for doing small diameter/deep hole drilling or high-precision drilling with carbide tooling.
Easy unit replacement on operations originally utilizing Selfeeder Electric types because it uses the same circular body style .
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec kg
MS3P-3075LLZ 7.500 9,000 3 1.5 1.5
MS3P-3060LLZ 6,000 7,200 4 1.5 1.5
ER11 0.5∼7 0.35
MS3P-6049LLZ 4,900 5,900 5 2 2 2P
34
MS3P-6034LLZ 3,400 4,100 7 3 3 Induction
motor 0.4
MS3P-1326LLZ 2,600 3,200 7.5 3.5 3.5
AC Max. Max.
MS3P-1318LLZ 1,800 2,200 8.5 5 4 150 1,760
servo 200 16.7
MS3P-1314LLZ 1,400 1,700 9.5 6 6 motor
MS3P-1310LLZ 1,000 1,200 ER20 0.5∼13 10 8 7 0.35
6P
MS3P-1307LLZ 700 800 12 9 8 35
Induction
MS3P-1306LLZ 600 700 13.5 10.5 9 motor
MS3P-1305LLZ 500 600 14 12 10
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle motor is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
4. In the case of a servo motor with a holding brake (optional), add B to the end of the model number.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
MS3P-60**LLZ
ER11 Mounting spindle
A
114
φ19
φ47
ER20 Mounting spindle
φ60
−0.01
φ74−0.04
287
Symbol
Depth of tool shank insertion A B
140
Max.41.5 φ50g6
Model
MSP-3075LLZ
MSP-3060LLZ
φ34
MSP-6049LLZ
52
373 265
44.5 MSP-6034LLZ
Clamping range MSP-1326LLZ
61 141 Width across flat 24 62 51 186 Signaling cable for feed motor MSP-1318LLZ
202 20 (5m included as standard)
Full stroke MSP-1314LLZ
150 102.5 632
MSP-1310LLZ
Machine zero point MSP-1307LLZ 438 330
MSP-1306LLZ
MSP-1305LLZ
16
Selfeeder
SelfeederMechatric
Mechatric
Max. Drilling size (mm)
Max. Drilling size (mm)
Selfeeder
Selfeeder
MS7
MS7
varimec
varimec
Multi-spindle
Multi-spindle
Long Long
strokestroke
heads attachable
heads attachable
Selfeeder
Selfeeder
Aluminium
Aluminium
φ 40φ40 LargeLarge
dia. dia.
drilling
drilling
Mechatric
Mechatric
Steel
Steel
φ 28φ28
other attachments
other attachments
Specs. SpindleSpindle
Specs. speed (no
speed
load)(no load) Max.Max.
Drilling
Drilling
sizesize RapidRapid
Chuck Chuck
typetypeChucking
Chucking Spindle
Spindle
Feed
Feed Cutting
Cutting
AL*AL* FC* FC* ST* Stroke
ST* Stroke Thrust approach
Thrust approach Weight
Weight
50Hz 50Hz60Hz 60Hz (Collet(Collet
chuck) capacity
chuck) capacity motor
motormotor
motor speed
speed
(ADC) (FC200)
(ADC) (FC200)
(S45C)
(S45C) speedspeed
Model
Model minmin
-1 -1
‒ ‒ mmmm mmmm mmmm mmmm mmmm kW kW kW kW N Nmm/sec
mm/sec
mm/sec
mm/seckg kg
MS7-32292,9002,900
MS7-3229 3,5003,500 11 11 4 4 3 3 3.7 3.7
4P 4P
MS7-3222
MS7-32222,2002,200
2,7002,700 13 13 5 5 4 4
Induction
Induction
MS7-32151,5001,500
MS7-3215 1,8001,800 17 17 7 7 6 6 motor 2.7 2.7
motor
AC AC Max.Max.Max.Max.
MS7-3210
MS7-32101,0001,000
1,2001,200ER32
ER32 1.0∼20
1.0∼20 20 20 14 14 12 12 200200 7,800
7,800 270270
2.2 2.2 servo
servo 29829816.716.7
MS7-3206
MS7-3206 650 650800 800 25 25 19 19 16 16 6P 6P motor motor
MS7-3205 500 500600 600
MS7-3205 31 31 24 24 21 21 Induction
Induction
motor
motor
MS7-3203
MS7-3203 340 340410 410 40 40 32 32 28 28
Notes1.
Notes1.
To select
To select
your model,
your model,
refer to
refer
thetoworkpiece
the workpiece
configurations,
configurations,
material,
material,
cutting cutting
properties,
properties,
diameter
diameter
of theofhole,
the hole,
and rotation
and rotation
speed.(cutting
speed.(cutting
speed)
speed)
2. The2. drilling
The drilling
capacity
capacity
shown shown
aboveabove
is for is
a for
depth
a depth
equivalent
equivalent
to thetodrill
thediameter
drill diameter
timestimes
two. two.
3. The3. power
The power
voltage
voltage
of theoffeed
the controller
feed controller
and main
and main
spindle
spindle
motormotor
is a 3-phase
is a 3-phase
200V200V
AC±10%,AC±10%,
50/60Hz.
50/60Hz.
4. In the
4. Incase
the case
of a servo
of a servo
motormotor
with awith
holding
a holding
brakebrake
(optional),
(optional),
add B addto Bthetoendtheofend
theofmodel
the model
number.
number.
5. AL*…Aluminium,
5. AL*…Aluminium, FC*…Cast
FC*…CastIron, ST*…Steel
Iron, ST*…Steel
Dimensions
Dimensions
(mm)
(mm)
Signaling
Signaling
cable cable
for for
Power cable
Powerconnection
cable connection
port φ27
port φ27
feed motor
feed motor
250 250 312 312 105 105
PowerPower
cable cable
for for
feed motor
feed motor
85
85
φ223
φ223
Width Width
acrossacross
flat 36flat 36
ER32 ER32
φ105
φ105
Mounting
Mounting
spindle
spindle
525
525
(488)
(488)
267
267
φ68
φ68
307.5
307.5
φ50
φ50
238
238
130
130
58 58
50
50
25
25
6
+0.03 +0.03
4-φ18
4-φ18
240 240 75.5 75.5
70 7098 98 260 260
48
145.5145.5 48 350 350 496 496
275 275
Full stroke
Full stroke
417.5417.5 200 200 1039.5
1039.5
17
SERVO series
SERVO series
4TH3S
Linear guide
Compact
(JP PAT.)
Aluminium
12
Spindle speed 4-spindle
φ variable type Turret
Steel
φ 8
Compact sized turret which uses a Selfeeder Varimec as a drive unit. It has a tool change function so 1 machine can do 4 types of operations.
Also it is useful for using by automatic drilling machine style with tool change system .
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size Rapid Indexing time
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke motor motor Thrust approach speed Weight
50Hz 60Hz (Collet chuck) capacity speed 50Hz 60Hz
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm mm kW kW N mm/sec mm/sec sec sec kg
4TH3S
+ 1,000∼ 7,000 6.5 5 4
SSV3-7100THB 0.4 0.4
Max. Max.
DC brushless AC servo 1,660 73
4TH3S Stub holder 200 200
motor motor
[ ]
Max.
+ 265∼ 2,650 KH-20E 2.6∼9.0 12 9 8 0.9 0.8
SSV3-1626THB 16.7
NT tool
4TH3S 1.0 1.2
Max. Max.
+ 1,000∼ 7,000 9 8 7 DC brushless AC servo 4,600 110
SSV4-2070THB 250 220
motor motor
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. Indexing time is the time for turret rotation. It does not including the time of spindle start and stop.
4. When you install this turret head into SSV3-7100THB, please set "under 7,000min-1" for spindle rotation speed.
5. Holding brake is attached to the feed motor.
6. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
213
321
306
70
88
37
+0.03
10 19 10 0
79 96 Air supply port for
16
116
52 216 cooling spindle motor
208 157 175 127 4-φ11
67 186 Appropriate tube
365 302 external diameter φ6
Full stroke 29 503
200 834
Machine zero point
SSV4 install model 14 188 66.5
Gear motor for turret rotation Turret head 4TH3S
selfeeder《varimec》
KH-20E Mounting spindle SSV4-2070THB
°
80
422.5
233
213
321
(φ126)
90
88
37
10+0.03 79 96 10 30 160 10 0
+0.03
6
6
Note: Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
18
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
Selfeeder
I/O cable (prepared by customers) ① Turret head (4TH3S)
② Controller (UC-121, UC-122)
Standard accessories
③ Power cable for indexing motor ・・・ 5m
varimec
User control circuit
Operation panel ④ LS cable ・・・・・・・・・・・・・・・・・・・・・・・・・・ 5m
OB-11(option)
10 2 ∼ Power supply ⑤ Proximity switch cable ・・・・・・・・・・・・ 5m
9 Three-phase AC200V
⑥ Sequencer
Power cable (prepared by customers) ⑦ Terminal board for input signal and main power
⑧ selfeeder《varimec》
Selfeeder
18 ⑨ Controller for feed motor
8 ⑩ Inverter for spindle motor
1 ⑪ Power cable for feed motor ・・・・・・・・ 5m
17 ⑫ Signaling cable for feed motor ・・・・ 5m
Programming console
7 ⑬ CS sensor/LS cable for spindle motor ・・ 5m
Mechatric
PC-03B (option)
Touch panel 6 ⑭ Power cable for spindle motor ・・・・・ 5m
TP-01 (option) 19 15 16 ⑮ LS cable for detecting OT in forward direction
⑯ LS cable for detecting OT in backward direction
⑰ I/O cable (feed⇔Sequencer)
3 4 5 11 12 13 14 ⑱ Power cable (Control⇔feed)
⑲ Power Cable for holding brake
Notes1. Operation panel, the programming console and touch panel is optionally available. The attached cable is 3m long.
2. Programming from a computer is possible using a PC monitor soft cable. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
3. Turret rotation can operate from operation panel only. It is impossible for doing turret rotation from programming console, pouch panel and PC monitor software.
X117 Spare
Y50 All origin position
Operation panel OB-11 Digital switch
Y51 Selfeeder Origin
700
0 00
connection
0 00
※2 Y53 Program end
0 00
Output Y54 Alarm
A
Y55 Run
Y56 Spare
40 230 Cable connection point
40 520 Y57 Spare
150
- - -
Application
0 00
+ + +
DSW9 DSW2 DSW1
2nd Process
Turret No. Program No.
- - -
0 00
+ + +
DSW10 DSW4 DSW3
3rd Process
Turret No. Program No.
- - -
0 00
+ + +
DSW11 DSW6 DSW5
4th Process
Turret No. Program No.
- - -
0 00
+ + +
DSW12 DSW8 DSW7
4TH5
Spindle speed
Linear guide
variable type
Aluminium
20
4-spindle
φ Turret
Rigid tapping
Steel
φ 13
Max. Tapping size (mm)
Specification Chart
Aluminium Specs. Spindle speed (no load) Max. Drilling/Tapping size Rapid Indexing time
Chuck type Chucking Spindle Feed
M 16 50Hz 60Hz (Collet chuck) capacity
AL* FC* ST* Stroke motor motor Thrust approach
(ADC) (FC200) (S45C) speed 50Hz 60Hz
Weight
[ ]
Max. Max. Max.
KH-25E 3.6∼16.0 AC servo AC servo
20 15 13 200 1,960 500
NT tool motor motor
4TH5-1612 Max.1,200 1.5 1.2 280
M16 M12 M12
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The upper row of the maximum drilling/tapping capacity section shows the maximum drilling capacity. And lower row shows the maximum tapping capacity.
3. The drilling capacity shown above is for a depth equivalent to the drill diameter times two. A spiral type or point type tapping tool is used for the tapping capacity section.
Tapping capacities are conditional on the depth of tapping being limited to 1.5 times the tap diameter.
4. Holding brake is attached to the feed motor.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions (mm)
4TH5-1660
Full stroke
200
258 178
(212)
103
(59)
Rc1/8
Dry air supply port 50
26
(576)
534
275
Note1. For protecting the inside structure, please input dry air for air-purge from Rc1/8.
2. Parenthesized numbers are showing the dimensions of 4TH5-1612.
20
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
Selfeeder
Standard accessories ① 4-axis Turret head 4TH5
② Controller (UC-110)
11
③ Signaling cable for feed motor ・・・・ 5m
varimec
④ Power cable for feed motor ・・・・・・・・ 5m
⑤ LS cable for feed motor ・・・・・・・・・・・ 5m
2 ⑥ Power cable for spindle motor ・・・・・ 5m
1 ⑦ Signaling cable for spindle motor ・・ 5m
⑧ Cable for fan of spindle motor ・・・・・ 5m
Selfeeder
⑨ LS cable for turret rotation ・・・・・・・・ 5m
⑩ Motor cable for turret rotation ・・・・・ 5m
Teaching unit (option)
⑪ Operation panel (OB-02, Attached cable 3m)
Cable length 3m 9
10
Mechatric
Laptop computer
(prepared by customers) 6
7
8
PC cable (option)
Cable length 3m
3
other attachments
Least input increment : 0.001mm
Least command increment : 0.001mm
Input commands Max. programmable dimension : 999999999.999mm
Operation panel OB-02 Decimal point input.
Cutting feed rate : F mm/min direct command
G00 Positioning G31 Skip function
30
Z S T
※1
編集 原点復帰
サーボ ティーチング
OFF
プログラム選択 シングルブロック
OFF ON
主軸
正転
主軸
逆転 S function Command spindle speed, rotation start and stop.
タレット 主軸
3 7 1割出し 停止 T function Command assignment turret No. and turret index start.
Various calculate function ○(Available in NC program.)
Confirm NC status, Setting or
○(Available only in NC program.)
reference I/O parameter
206 100 22 78
Use of register ○(Available for coordinate address.)
Macro command ×
Canned cycle ×
Tool life management ×
Operation panel Using in case of manual operation.
Description for ※1 ・Inputting, reference and changing the NC program.
Controller UC-110 components Teaching unit ・Reference and Changing the parameter of NC program and amplifier.
PC software ・Monitoring the operating conditions of NC program and amplifier.
140 410 348 Machine zero return.
Servo motor ON.
※2 Cycle run.
Output signal Program end.
Alarm
M50∼M57 : Codes for customer.
Automatic operation start.
External emergency stop.
840
External Reset
I/O signal Program No.1 (Assign program No.)
Program No.2 (Assign program No.)
※3 Program No.4 (Assign program No.)
Input signal Program No.8 (Assign program No.)
Program No.10(Assign program No.)
360 Program No.20(Assign program No.)
100
Programming
22
Other attachments
Selfeeder
Additional Sugino products which can achieve high-efficient operations besides Selfeeder servo series.
varimec
All that is needed for operation on the same day is a connection
NC automatic drilling machine with the main power supply. This is an NC automatic drilling machine
Standrill NC available not only for drilling but also tapping. An optional touch panel
allows easy operation of NC programs even if the user is a beginner.
Selfeeder
Mechatric
The same high-rigidity and high-power DC brushless motor and precise
High rigidity spindle motor angular bearing as the Selfeeder Varimec are utilized. It is compact
Varimotor sized spindle unit and capable of doing heavy cut processing.
Application
Specification Chart
Specs. Spindle speed (no load) Max. Drilling size
other attachments
(ADC) (FC200) (S45C)
Model min-1 ‒ mm mm mm mm kW kg
SSV2-7200CM 2,000∼20,000 ER11MS 0.5∼7.0 5 4 3.5
0.9 4
SSV2-1039CM 390∼ 3,900 ER16 0.5∼10.0 8.5 7.5 6.5
ER11 0.5∼7.0
SSV3-7100CM 1,000∼10,000 6.5 5 4
ER20 0.5∼13.0
0.4 12
ER20 0.5∼13.0
SSV3-1626CM 265∼ 2,650 12 9 8
ER25 0.5∼16.0
SSV4-2070CM 1,000∼ 7,000 9 8 7
ER32 1.0∼20.0 1.0 24
SSV4-2017CM 250∼ 1,750 16 15 13
SSV5-2055CM 800∼ 5,500 ER32 1.0∼20.0 14.5 11.5 9.5
1.6 43
SSV5-2610CM 250∼ 1,010 ER40 2.0∼26.0 25 20.5 18
Notes1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage is a 3-phase 200V AC±10%, 50/60Hz.
4. For cooling the motor in inside, please input clean dry air into air-inlet.
5. Please take care for not closing the air-outlet for motor cooling by clamp fixture etc. Also please set the air-outlet certainly becomes downward.
6. The leading direction of cable is different from the type of Varimotor. If you need more detailed information, please ask your nearest sales offices.
7. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions(mm)
Fig.1(SSV2CM)
H
φ40
φ62
φF
CS sensor cable
φ11
φ6
CS sensor cable
33 19 30 19
SSV3-7100CM
80 473 42 320 34 27 6
Air supply port 60
Depth of tool shank insertion SSV3-1626CM 15
Max.G
Spindle motor J Fragmentary view 46 42 32
2
SSV4-2070CM
100 659.5 58 454.5 58
φAg5
J SSV4-2017CM 50 36
φF
8
SSV5-2055CM
120 807.5 71 19 519 60
Air outlet for cooling motor SSV5-2610CM 63 46
C D Clamping range E 15
Note: The C, F and G dimension in this drawing will changes with the
B
spindle specification which shown in the above capacity table.
23
Sugino Gives You More Choices
for Automating Your
Drilling and Tapping Operations
JCC, U-Jet,
Spa-Clean Center
Flexible high pressure water
deburring and precision
washing up to 10,000 psi. Multiple Spindle Heads
Repeatable Multi axis movement. 100% gear-driven ball and needle bearing
Advanced nozzle technology design. Spindle center distances down to 8mm;
speeds to 9,000 rpm
*Specifications in this catalog are subject to change without prior notice for further improvement.
Copying or reprinting this catalog or its contents without expressed written permission from Sugino Corp. is prohibited.
This product and other related technology (include the program) are subject to the terms and conditions of the relevant foreign trade acts depending on end users and their applications