Professional Documents
Culture Documents
This Document Will Be Valid For 180 Days From Jun 15, 21 or Until It Has Been Incorporated in The EM, Whichever Occurs First.
This Document Will Be Valid For 180 Days From Jun 15, 21 or Until It Has Been Incorporated in The EM, Whichever Occurs First.
This Document Will Be Valid For 180 Days From Jun 15, 21 or Until It Has Been Incorporated in The EM, Whichever Occurs First.
TDRM PSAF - AIRBUS TSM, CLARIFICATION OF TESTING REQUIREMENTS AFTER CARBON SEAL
SUBJECT: REPLACEMENT ON THE EXTERNAL GEARBOX
."
OTHER _____________________________________________________________________________
s t
fir
PART NUMBERS INVOLVED (RFA OR OTHER) ________________________________________________
w il ncor___N___
NEW PROPRIETARY REPAIR INTRO l TROUBLESHOOT/FAULT ISOL. MANUAL AFFECTED ___Y___
e nt en i ___N___
SUPPORT EQUIPMENT REQUIRED MAINTENANCE MANUAL AFFECTED ___N___
u m s be
FACILITIES EQUIPMENT REQUIRED
c
___N___ ENGINE MANUAL AFFECTED ___N____
d o ha
i s i t
CONFIRMED PARTY COMPANY
l
Richard Bremer 03-Jun-2021
"Th unti
________________________ ________________________ ________________________
TECHNICAL DATA APPROVAL
(PRINT NAME) (Signature) (DATE)
or
IAE AUTHORIZATIONS
1. Possible Causes:
-fuel pump drive
-IDG drive
-starter drive
s t ."
-hydraulic pump drive
1 urs fir
2. Job Set-up Information , 2
5 occ
1
A. Referenced Information Jun ever
f r om hich
REFERENCE DESIGNATION
s , w Test
Ref. AMM 71-00-00-710-013 Test No.11 : HighayPower Assurance
0 d Leak ECheck
M
Ref. AMM 71-00-00-710-012 Test No.3 : Idle
8
1 the Starter
t e
h Drive Seal Assembly and Mating Ring
Ref. AMM 72-60-22-000-010 Removal of
o r
f ofd the
Ref. AMM 72-60-22-400-010 Installation in Starter Drive Seal Assembly and Mating Ring
i d
l ate Hydraulic Pump Drive Seal Assembly and Mating Ring
v a
Ref. AMM 72-60-23-000-010 Removal
Ref. AMM 72-60-23-400-010e Installation
of the
r of the Hydraulic Pump Drive Seal Assembly Mating Ring
b p o
w c or ofofthetheFuel
ill nRemoval
Ref. AMM 72-60-25-000-010 Pump Drive Seal Assembly and Mating Ring
A. Test
Not applicable, the fault is evident.
4. Fault Isolation
SUBTASK 71-70-00-810-052-A
A. Do a high power assurance run to test for leaks, test No. 11, Ref. AMM 71-00-00-710-013.
Do an idle leak check to test for leaks, test No. 3, Ref. AMM 71-00-00-710-012.
This document does not contain technical data subject to the EAR or ITAR.
PSAF No : 21VC230
(2) Examine the seal drain lines from the hydraulic pump, starter, integrated drive generator and fuel pump
for seal leakage.
(a) If the seal leakage is satisfactory, the replacement of the seal is not necessary.
(b) If the seal leakage is not satisfactory, identify the seal which has leaks:
s t ."
1 If the seal on the drain line from the fuel pump drive is defective:
1 urs fir
, 2
5 occ
-replace the fuel pump drive, Ref. AMM 72-60-25-000-010 and Ref. AMM 72-60-25-400-010.
1
n ver
J
2 If the seal on the drain line from the IDG drive is defective: u
-replace the IDG drive, Ref. AMM 72-60-28-000-010 andeRef. AMM 72-60-28-400-010.
f r om hich
3 If the seal on the drain line from the starter
a y s drive, wis defective:
d
-replace the starter drive, Ref. AMM 72-60-22-000-010
E M and Ref. AMM 72-60-22-400-010.
80 the pump drive is defective:
4 If the seal on the drain line from1 the hydraulic
-replace the hydraulic pump f r Ref.
odrive, i n AMM 72-60-23-000-010 and Ref. AMM 72-60-23-400-
d d
010.
v ali rate
SUBTASK 71-70-00-710-055-A be p o
l
il nco r
t w i forto leaks,
n
B. Do a high power assurance
e ee nrun test for leaks, test No. 11, Ref. AMM 71-00-00-710-013.
m
Do an idle leak check
cu has b
to test test No. 3, Ref. AMM 71-00-00-710-012.
o
d it
i s l
"Th unti
or
This document does not contain technical data subject to the EAR or ITAR.
PSAF No : 21VC230
Note to MDE: Revise the V2500-A1/A5 Troubleshooting Manual, ATA 71-70-00 (TASK 71-70-00-810-808-A) as
shown below. Delete the double strikethrough text and add the bold red text as shown below.
Page revision dated May 01/2021 used to show the changes.
1. Possible Causes:
-fuel pump drive
-IDG drive
-starter drive
s t ."
fir
-hydraulic pump drive
, 2 1 urs
2. Job Set-up Information
1 5 occ
A. Referenced Information
Jun ever
REFERENCE DESIGNATION
f r om hich
Ref. AMM 71-00-00-710-013 Test No.11 : HighyPower
a s Assurance
, w Test
d EM
Removal of80
Ref. AMM 71-00-00-710-012 Test No.3 : Idle Leak Check
Ref. AMM 72-60-22-000-010
1 h e Drive Seal Assembly and Mating Ring
the Starter
t
Ref. AMM 72-60-22-400-010
f o
Installationr of ithe
n Starter Drive Seal Assembly and Mating Ring
Ref. AMM 72-60-23-000-010
l id tofedofthetheHydraulic
Removal
a
Pump Drive Seal Assembly and Mating Ring
Ref. AMM 72-60-23-400-010
e v ora
Installation Hydraulic Pump Drive Seal Assembly Mating Ring
Ref. AMM 72-60-25-000-010 b p of the Fuel Pump Drive Seal Assembly and Mating Ring
i l l o r
Removal
t w incInstallation
Ref. AMM 72-60-25-400-010 of the Fuel Pump Drive Seal Assembly and Mating Ring
e n en
Ref. AMM 72-60-28-000-010 Removal of the IDG Drive Seal Assembly and Mating Ring
A. Test
Not applicable, the fault is evident.
4. Fault Isolation
SUBTASK 71-70-00-810-053-A
A. Do a high power assurance run to test for leaks, test No. 11, Ref. AMM 71-00-00-710-013.
Do an idle leak check to test for leaks, test No. 3, Ref. AMM 71-00-00-710-012.
(1) Examine all the areas on the gearbox and the angle gearbox where there are bolt on accessories, joints
and tube connections for external leaks.
This document does not contain technical data subject to the EAR or ITAR.
PSAF No : 21VC230
(2) Examine the seal drain lines from the hydraulic pump, starter, integrated drive generator and fuel pump
for seal leakage.
(a) If the seal leakage is satisfactory, the replacement of the seal is not necessary.
(b) If the seal leakage is not satisfactory, identify the seal which has leaks:
1 If the seal on the drain line from the fuel pump drive is defective:
s t ."
fir
-replace the fuel pump drive, Ref. AMM 72-60-25-000-010 and Ref. AMM 72-60-25-400-010.
, 2 1 urs
2 If the seal on the drain line from the IDG drive is defective:
1 5 occ
-replace the IDG drive, Ref. AMM 72-60-28-000-010 and Ref. AMM 72-60-28-400-010.
J u n ver
m
3 If the seal on the drain line from the starter drive is defective:
c h e
f
-replace the starter drive, Ref. AMM 72-60-22-000-010 r o h i and Ref. AMM 72-60-22-400-010.
4 If the seal on the drain line from thedhydraulic ays Mpump , w drive is defective:
8 0Ref. AMM
e E 72-60-23-000-010 and Ref. AMM 72-60-23-400-
- replace the hydraulic pump drive,
1
010.
f or in th
a l id ted
SUBTASK 71-70-00-710-057-A
e v ora
b test rp fortest
B. Do a high power assurance
Do an idle leak checkwto illtestrunnforctooleaks, leaks, test No. 11, Ref. AMM 71-00-00-710-013.
t
n en i No. 3, Ref. AMM 71-00-00-710-012.
e
m s be
c
o ha u
d
i til it
s
h
"T un
or
This document does not contain technical data subject to the EAR or ITAR.