This document provides the dimensions and tolerances for a buttress casing thread form. Key specifications include:
- The major diameter is 10.766 inches with a tolerance of +1%/-0.5%
- There are 5 threads per inch
- The thread crest diameter is 10.7125 inches with a tolerance of +0.006/-0.002
- General tolerances are provided unless otherwise indicated
This document provides the dimensions and tolerances for a buttress casing thread form. Key specifications include:
- The major diameter is 10.766 inches with a tolerance of +1%/-0.5%
- There are 5 threads per inch
- The thread crest diameter is 10.7125 inches with a tolerance of +0.006/-0.002
- General tolerances are provided unless otherwise indicated
This document provides the dimensions and tolerances for a buttress casing thread form. Key specifications include:
- The major diameter is 10.766 inches with a tolerance of +1%/-0.5%
- There are 5 threads per inch
- The thread crest diameter is 10.7125 inches with a tolerance of +0.006/-0.002
- General tolerances are provided unless otherwise indicated
Major diameter, D4 10.766 +1%/-0.5% No. of thread per inch 5 Vanish point, L4 (Ref.) 4.5125 Not spicified because of type of thread Thread crest diameter at end of pipe,C9(Ref.) 10.6080 Thread crest diameter, C10 10.7125 +0.006/-0.002 End of pipe to gauge plane, L10 1.8160 End of pipe to Triangle stamp, A1 4.8125 ±0.031 Thread runout (A1 + 0.375) 5.1875 min. Full crest threads from end of pipe, Lc 2.1285 min. Thread taper per inch on diameter 0.0625 +0.0035/-0.0015 BUTTRESS CASING THREAD FORM AND DIMENSION Thread height 0.062 ±0.001 Thread pitch 0.200 Lead per inch 1.000 ±0.002 Cumulative lead 2.000 ±0.004 Hand-tight ring gauge standoff Flat +0.100/-0 TOLERANCES UNLESS SPECIFIED Description Material 1. Document reference, API Spesification Standard 5B 16th edition, and UNIT MM INCH 5CT 10th edition. .XXX --- ±0.010 Treatment Weight 2. All dimension are in inch. .XX ±0.25 ±0.030 .X ±0.8 ±0.060 3. General tolerance unless other wise indicated. X. ±1.5 --- FRACTIONS --- ±1/16 Proj. 3th angle BREAK SHARP ADGES ±0.3 x45° ±0.010 x45° Paper Scale FILLET RADIUS 0.8 ±0.10 0.030 ±0.005 ANGLE ±0.5° ±0.5° A4 CONCENTRICITY 0.15 DIA 0.005 DIA PT. SERVOTECH INDONESIA Drawing number Rev. SQUARENESS 0.01 IN 100 0.010 IN 10 PARALLELISM 0.01 IN 100 0.010 IN 10 SURFACE FINISH 3.2 µm 250 µ IN