Professional Documents
Culture Documents
5 20KW Three Phase Inverter Manual
5 20KW Three Phase Inverter Manual
2 Amber Series
S Three-p
phase Photovo
oltaic Inverter
Sollar inverrter
- Instaallation
- Operration
- Norm ms
LT 50000HD
LT 60000HD
LT 80000HD
LT 100000HD
LT 155000HD
LT 188000HD
LT 200000HD
Litto New
w Energy Co.,
C Ltd.
LT 15000/18000/20000HD Installation Operation Manual
Revision Record
File Revised By Date Modification Description
modification
2 2
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
Warm
m prompt
For yo
our safety, please ccarefully read the installation manuaal of Litto photovooltaic grid tied inveerter before the
operattion,non-professioonal technical persoonnel are not allow
wed to install or opperate the machinee.
Warniing
In ordeer to avoid elecctric shock, aftter inverter PV
V end and gridd end is
disconnnected 5 minuttes at least, theen it is allowed
d to touch the input and
output wires of inverrter.
¾ The inveerter installationn must be in fuull compliance with local safeety standards an nd
regulatioons, avoid closee to flammablee or explosive mediums, so as to avoid firre
accident..
¾ Only afteer obtaining thhe approval of thet local nationnal laws and reegulations of th he
administrrative department, that invertter can be connnected to the power grid, an nd
must be ooperated by quaalified personneel.
¾ Before coonnecting solarr panels and inv verter, the panells surface mustt be covered witth
opaque oobjects, ensurinng the connectiion cables are not dangerous due to the hig gh
voltage.
¾ Please fufully understannd the installattion manual o f Litto photov voltaic grid tieed
inverter bbefore installatiion and wiring.
¾ The inveerter can only transfer energy y to the grid, ddo not put inv verter AC outpu ut
terminal connected to thhe AC load or generator,
g prevventing from eq quipment damag ge
or personnal injury.
¾ The surfaace of the inverrter may becom me hot when it iss working, do not
n touch inverter
by hand or any part off your body, in n order to prevvent burns; and d please don't set
inflammaable and explossive materials in n the inverter orr closed to the inverter.
i
¾ Litto PVV grid tied invverter is non-isolate high freqquency invererr, thus the inpu ut
negative is not allowed to grounding.
¾ Litto LTT5000/6000/80000/10000/15000 0/18000/20000H HD series inveerter has natural
cooling w way, please make
m sure that the installationn of the distannce between tw wo
inverters, greater than 1 m, in order to t avoid overheeating and can't reach the rateed
power off inverter outpuut.
¾ Litto invverters are conffigurated with WIFI communniction mode, please p make surre
signal unnimpeded during installation.
3 3
LT 15000/18000/20000HD Installation Opperation Manuall
Identified as foollows:
Equipment gro
ounding wire
AC value
DC value
Phase
In order to avo
oid electric shocck, after inverteer PV end and
grid end is disconnected 5 miinutes at least, then
t it is alloweed
/5minnutes to touch the in
nput and output wire parts of in nverter.
4
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
Conteents
1. Overview………
……………………
……………………………………
…………………………………6
1.1 General feattures…………… …………………… ………………… …………………… ……………. .6
1.2 Product appeearance ………… …………………………………… …………………………….. …7
1.3 Product sizee and weight ……
… ……………… ……................... ..................................... ……8
1.4 Product nammeplate informattion ………..……
………………… …….…………… …………. ….8
1.5 Parameter liist ……………… …………………………………… ………………………………..8
2. Installation
I …
……………………
…………………
……………………
……………………
…….…….12
2.1 Safety note ................................................................................................................... 12
2.2 Product pac king list ……………………… …………………… ………………… …………….12
2.3 Product insttallation examplee … ........................................................................................ 13
2.4 Safety distannce ............................................................................................................... 14
2.5 Installation steps ................................................................................................................. 15
3. Ellectrical conneection …………… …………………………………… …………………… ………….17
3.1 Safety …… ………………… …………………… ………………… …………………… ……………17
3.2 MC4 assembbly process ................................................................................................... .18
3.3 AC side connnection .......................................................................................................... 20
3.4 Communicaation part connecction …………….………….................................... …….21
6. Sy ng ......................................................................................................................….30
ystem monitorin
6.1 WIFI monit oring…………… …………………………………… ……………………………..30
6.2 Built in WI--FI connection network
n settings…
…………………
……………………
………. …..33
6.3 USB monitoor connection ……………………
… ………………… …………………
…………. ….50
6.4 RS485 moniitor connection… …………………………………… …………………………. ….52
ault analysis..................................................................................................................................... ….54
7. Fa
8. Wa
arranty…………
……………………
………………………………..……
………………………..…....55
9. Co
ontact informatioon………………
……………………
………………..…
……………………
………..…57
5
LT 15000/18000/20000HD Installation Operation Manual
1.Overview
1. 1 General features
z Thank you for purchasing the excellent three-phase photovoltaic grid tied
inverter from Litto, inverter using most advanced T-type three level design,
no fan, maintenance free, with high reliability, high efficiency and easy
operation, etc.
z 2 independent MPPTtracker
z THD~2%.
z PC remote control
6
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
1.2 Product appeaarance
Exit key
Runuing
g indicator
Pg Up
Grid connteect waiting
indicator Pg Dn
Fault ind
dicator Confirm keey
light
USB comm
interface
7
L
LT 15000/18000/20000HD Insstallation Operaation Manual
8
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
1.5 Parameter list
Modeel LT 5000HD
D LT 600
00HD L
LT 8000HD
D LT 10000
0HD
DC in
nput parameter
Max. DC
D power 6000W 7000W 9000W 11000W
W
Max. DC
D voltage 1000Vdc 1000
0Vdc 1000Vdc 1000Vdc
c
Rated DC voltage 650 Vdc 650 Vdc
V 650 Vdc 650 Vdc
MPPT Toperationg
250-800 Vdc 250-80
00 Vdc 250-800 Vdc 250-800 Vdc
voltage range
MPPT T full load
250-800 Vdc 250-80
00 Vdc 400-800 Vdc 400-800 Vdc
voltage range
Input channels
c A:2/B:2 A:2/B:2 A:2/B2 A:2/B2
MPPT
T tracking
2 2 2 2
numbeer
Max. input
i current 11A/11A 12A/12A 14A/14A 14A/14A
A
DC co
onnection type MC4 terminal MC4 teerminal MC4terminal MC4 termin
nal
Max.o
outputapparent
5000VA 6000
0VA 8000VA 10000VA
A
powerr
Max output
o power 5500W 6600W 8800W 11000W
W
3/N/PE:220/38
8
0V
3/N/PE:220/380V 3//N/PE:220/380V 3/N/PE:220/3
380V
3/N/PE:230/40
0
Rated grid voltage 3/N/PE:230/400V 3//N/PE:230/400V 3/N/PE:230/4
400V
0V
3/N/PE:240/415V 3//N/PE:240/415V 3/N/PE:240/4
415V
3/N/PE:240/41
1
5V
Grid voltage
v range per
184V-276V 184V-276V 184V-276V 184V-276V
V
phase
Rated power grid
50 Hz/60Hz 50Hz/60Hz 50Hz/60Hz 50 Hz/60H
Hz
frequeency
45-55Hz/55-65
5
Grid frequency
fr range 45-55Hz/55-65Hz 455-55Hz/55-65Hz 45-55Hz/55-6
65Hz
Hz
Max. output
o current 8.1A per phasee 9.7A per phase 112.9A per phase 16.2A per ph
hase
9
LT 15000/18000/20000HD Installation Operation Manual
<3%(under
Current harmonics <3%(under Rated <3%(under Rated <3%(under Rated
Rated output
(THDI) output power) output power) output power)
power)
AC output terminal plug and play plug and play plug and play
plug and play terminal
connection type terminal terminal terminal
Efiiciency
Max. efficiency 98.1 % 98.1% 98.5% 98.5 %
EU efficiency 97.8% 97.8% 98.1 % 98.1%
MPPTefficiency 99.8% 99.8% 99.8% 99.8%
General data
(W / D / H) 尺寸 410*450*260 mm
(W / D / H) size 21Kg
N.W Wall hanging fixed
Install way –25 °C ~ +60 °C
Operating temperature
2000m
range
Max. altitude 0%-98% No condensation
Relative temperature ≤30dB(A)
Noise 0W
Night consumption Transformerless
Electrical isolation Air natural convection
Cooling mode IP65
Overall protection
USB/WIFI/RS-485
level
10
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
Mod
del LT 155000HD LT 18000H
HD LT 20000HD
2
nam
me
DC in
nput parameter
Max. DC
D power 165500W 19200W 22000W
2
Max. DC
D voltage 10000Vdc 1000Vdc 1000Vdc
1
Rated DC voltage 6500 Vdc 650 Vdc 650
6 Vdc
MPPTToperationg voltaage
250-8800 Vdc 250-800 Vdcc 250-800 Vdc
range
MPPTT full load voltaage
400-8800 Vdc 400-800 Vdcc 450-800 Vdc
range
Input channels
c A:33/B:3 A:3/B:3 A:3/B:3
MPPT
T tracking number 2 2 2
Max. input
i current 30A
A/30A 33A/33A 35A/35A
3
DC co
onnection type MC4 terminal
t MC4 terminall MC
C4terminal
Maximmum inverrter
0
0A 0A 0A
backfeeed current to arrayy
AC ou
utput parameters
Max output
o power 165
500W 19800W 22000W
2
Grid frequency
fr range 45-55Hzz/55-65Hz 45-55Hz/55-65H
Hz 45-55
5Hz/55-65Hz
Max. output
o current 24.3A per
p phase 29.2A per phasse 32.3
3A per phase
11
LT 15000/18000/20000HD Installation Operation Manual
AC output terminal
plug and play terminal plug and play terminal plug and play terminal
connection type
Efiiciency
Max. efficiency 98.5% 98.5% 98.5%
EU efficiency 98.1% 98.1% 98.1%
MPPTefficiency 99.8% 99.8% 99.8%
General data
(W / D / H) size 476*575*265 mm
N.W 50Kg
Install way Wall hanging fixed
Operating temperature
–25 °C ~ +60 °C
range
Max. altitude 2000m
Relative temperature 0%-98% No condensation
Noise ≤40 dB(A)
Night consumption 0W
Electrical isolation Transformerless
Cooling mode Air natural convection
Overall protection level IP65
Communication interface USB/WIFI/RS-485
12
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
2. Installatiion
2.1 Safety note
Inverter installaation must comply with state regullations for accideent prevention.Th
he
output of the innverter is directly connected to thee high voltage pow
wer grid device,
and the installaation must be operrated by professioonal personnel in
n line with nationa
al
and local sstandards and reguulations.
No. Item
m name Q TY
8 Maanual 1 pcs
9. Moonitoring softwaare(CD) 1 pcs
10 Waarranty card 1 pcs
13
L
LT 15000/18000/20000HD Insstallation Operaation Manual
¾ Litto PV gridd tied inverter iss specially desiigned for outdooor installation, please install in
the directions as shown in abbove diagrams.
¾ Within 15 deggrees vertical diirection is recommmended for thhe installation.
¾ Please install the inverter in the range of ey
yes can be checkk horizontally ini order to checck
the working sttate and parameeters of the LCD D display and m maintenance wo ork.
¾ Ensure the invverter is compleetely stable on the
t wall.
¾ It is not recom mmended to innstall inverter under
u strong suunshine, in case of overheatin ng
reduce output power.
¾ Environment temperature reccommended off installation loccation is from -25 degrees to 60 6
degrees (- 13 degrees to 140 degrees Fahren nheit).
¾ Please ensure that the installaation in a good ventilation envvironment, venttilation problem ms
will affect thee performance ofo the inverter internal
i electronnic componentss and shorten thhe
service life off the inverter.
14
4
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
2.4 Safety distancce
Wee recommend the inverter arround have a minimum cleaarance, so thaat better to heat
dissipation and wiiring operation, as shown below
w:
5
50cm
50cm 50ccm
5
50cm
The m
minimum clearrance around the invert
15
L
LT 15000/18000/20000HD Insstallation Operaation Manual
16
6
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
3 Electricall connectiion
3.1 Safety
Littoo LT XXXXXH HD series high efficiency
e three phase PV inveerter, its function is to convert
D power from panel into three-phase 50Hz 380V
the DC 3 AC poweer and feed into the grid. It can
be ussed for grid tiedd power system m.
In the installation, itt need to strictlyy according to the
t installation of the local reqquirements, andd
instaall the power meeasurement devvice. Inverter must be connecteed to the grid, cannot
c be used as
a
an inndependent deviice.
17
7
L
LT 15000/18000/20000HD Insstallation Operaation Manual
Simp
ple connection ddiagram of the inverter is show
wn in the follow
ws:
.
Soolar system wirring diagram 1
Liitto series threee phase inverter has been equippped with intern
nal DC switch,
pllease make suree proper connecction of the PV input, PV posittive, PV
neegative and PV voltage before switching on thhe switch, so ass not to cause
daamage to the invverter
N
Nonprofessional personnel pleaase do not carryy out the operatiion of the
innverter. Please ensure
e full disconnection from
m the AC grid beefore connectin
ng
thhe inverter AC output
o cables.
Join order:
1. Dissconnect the DC switch, make surre it won't be re-opened in casual ccase.
18
8
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
4. Use wire clamp, crimp contact hole; contact hole and cable into the coorresponding presssure interface,
comppress the joint.
5. Inssert the assembly connection wire to female and maale connector bacck, such as assem
mbly installed
corrrectly, should be able to hear or feeel "click" sound.
7. Aft
fter tightening, thee positive and neggative pole of thee PV module is coonnected to the co
orresponding
interfface of the inverteer, tighten until you hear or feel "cclick" sound.
19
9
L
LT 15000/18000/20000HD Insstallation Operaation Manual
8. If you
y want to separrate the connectorr, please use the special
s spanner toool to do.
20
0
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
3.3 AC
A side conneection
In order to prevent disopeeration, please use the AC circuit bbreaker with 100m
mA at least, if yo
ou
need to cconnect the AC circuit breaker to the
t outside.
The following
f is the innstallation of AC wire gauge.
Modeel LT 5000/60000/8000/10000HD
D LT 15000/118000HD LT 20000HD
MCB
B 32A 50A 63A
A
21
L
LT 15000/18000/20000HD Insstallation Operaation Manual
2) Inssert the 5 core cablle into the sealing sleeve and twist th rminal. (insert the 3 + N + PE line
he cable on the term
pressu
urized to AC5)
3) Affter the confirmatiion, the joint, andd inserted into thee AC terminal of the inverter
22
2
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
3.4 Communicatiion part conneection
Th e b o t t o m s i d e o f t h e i n v e r t e r h as R S4 8 5 , U SB , an d W I FI c o mmu n i ca tio
o n i n te rf ac es a s
s h o wn
w .
Functtion as follows:
Name Function
RS48
85 Updated veersion of the inverrter, data communnications, used fo
or inverter
monitoring control
USB Updated veersion of the inverrter, data communnications, used fo
or inverter
monitoring control
WIFII Updated veersion of the inverrter, data communnications, used fo
or inverter
monitoring control
Litto series PV grid tieed inverter has ricch communication interface and upupdate version schheme, more
conveenient, flexible annd convenient forr the user monitorring the status of the inverter and the
t power of the
meterr.
Note:
Invertter is not a equilibrrium measuring innstrument of curren
nt, voltage or poweer consumption,
23
L
LT 15000/18000/20000HD Insstallation Operaation Manual
4 Display
D screeen
4.1 Main
M interfacee
24
4
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
¾ At the LCD maiin interface of Litto PV inverter, you
y can see clear information abou ut inverter runnin
ng
now, the inform
mation below:
Menu u name Functionnal description
Cumu ulative generatingg Display inverter total gen
nerating capacity from installed co
onnected grid
capaccity to the present
Day power
p generationn Display inverter accumulative total generaating capacity of the
t day's
work unttil now
Outpu ut power Display inverter output po ower
Reduce carbon emissioons Display inverter energy saving
Modeel name Display this inverter moddel name
Seriall number Display this inverter seriaal number
Systeem version numbeer Display hardware, softwaare version numbeer of this inverterr
Integrrated LCD panel is in the upper coover of the inverter, which is convvenient for the useer to check and se
et
the daata. In addition, thhe user can presss any key to use th
he LCD display bbacklight light.
25
L
LT 15000/18000/20000HD Insstallation Operaation Manual
4 .2
2 Generatingg capacity qu
uery interfa ce
By generating ccapacity of the quuery interface, useers can easily queery to the day, mo
onth, year, 20
years generatingg capacity, the usser can be very co
onvenient to queryry the maximum 20 2 years amount of
o
power generatioon.
4.3 Failure
F interfacee
Th he fault display innterface can easilly query the inverrters have been reecently 21 record
ded, and the time is
accurrate to seconds.
26
6
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
W
Warning: at the tim me of the failure, input
i and output eends of the invertter still with stron
ng
electtricity, please switch off the DC an nd AC switch at lleast 5 minutes, after
a that it is
allow
wed to contact metal part of invertter.
Noon designated deaalers or non professsional technical personnel of Littto are not allowed d
to oppen the shell, in order
o to avoid unppredictable risk.
27
7
L
LT 15000/18000/20000HD Insstallation Operaation Manual
Settin
ng interface is eassy to operate, inclluding the system
m language, grid cconnect regulation
ns, time and
comm munication baud rrate and related Settings.
S
W
Warning: please do d not arbitrarily set
s the inverter grrid regulations paarameters, so as to
o
avooid the installatioon of the inverter regulations do noot apply to local regulations
r and in
n
thee disputes then.
28
8
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
5 System
S set k
key operatiion guidelin
nes
29
9
LT 15000/18000/20000HD Installation Operation Manual
Main
interface
System settings
System parameter
selection
System parameter
selection
Press OK one time
Set time
Complete
time setting
Press ESC twice
Complete
30
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
5.3 Buzzer state ssetting
Main
interface
Presss DOWM three times
t
System setttings
Press DOWM
D Selete the state
Press ESC
E twice
Complete
31
L
LT 15000/18000/20000HD Insstallation Operaation Manual
System settinngs
Presss OK one time
S
Select the U set
s options
Presss DOWM Selete th
he state
S
Select U disk
C
Complete thhe
setting
Complette
32
2
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
6 System moniitoring
Litto PV grid tied inverter has abuundant control sccheme, the user caan convenient to monitor the
operaation of the invertter, power generaation and power generation
g benefitts. Litto LT XXXXXXHD series
invertter standard layouut wi-fi, RS485, USB
U communication mode.
6.1 WI-FI
W monitooring
33
L
LT 15000/18000/20000HD Insstallation Operaation Manual
34
4
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
3) After completting the relevannt data, select th
he next step
4) In accordancee with the requuirements of th he relevant paraameters, in wh hich the collecto
or
serial numberr can be seen inn the product lab bel of the inverrter, click next step to complete
the register.
5) Scan the two-dimension codee of SmartClien nt from the site..
35
L
LT 15000/18000/20000HD Insstallation Operaation Manual
36
6
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
2: Usse the fast settinng software to connect.
c
1) Ennter the site httpp://litto.shinemoonitor.com/.
2) Sccan the followinng two-dimensiion code.
4) Op
pen the interfacce of setting, cliick the button of
o "Select...".
37
7
L
LT 15000/18000/20000HD Insstallation Operaation Manual
5) Seelect the wirelesss network you need to connecct, and then clicck Confirm.
6) En
nter the passwoord of the wireleess, click Settin
ng, the software will automaticc set up.
38
8
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
39
9
L
LT 15000/18000/20000HD Insstallation Operaation Manual
The USB connnection line froom Litto packing (which is alsoo available from
m the
market),one ennd is connectedd to the USB po
ort of the compuuter, and the oth
her end is
connected to tthe inverter's USB.
Computer prom
mpts that find new
w hardware.
Using the CH341 chip driverr installed proviided from the ddisk drive, turn on
o my computeer
to see the corrresponding COM M port.
Diagram: the installation
i is com
mplete
40
0
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
6.4 RS485
R moni tor connectiion
The RS485
R is used ffor communicaation with several inverters. Thhe Ethernet cablle is suitable forr
conn
necting each invverter. Ethernet has only three lines: two is a ssignal line, one is the ground
wire..
8 uuseless
RJ45 Connectors can bbe used to connecct one or more inv verters string togeether.it can reach
h 31 pcs inverters
mum recommendded is 1000 m. Multiple
g together.The serries connection enngth of the maxim
string M inverters
conneected in series, each will get Littoo monitoring soft
ftware RS485 fixxed address (addrress can be set on
n
the paanel).
With 120 Ω terminal rresistance RJ45 soocket should be installed the last in
inverter in series connection.
c Litto
o
nsion provides a special RJ45 sockket with a resistor and an empty RJJ45 socket in attaached accessories.
exten
Whenn the inverter is nnot the last one inn the series conn
nection, remove th
the end resistancee and used as a
vacan
ncy RJ45 socket..
In orrder to ensure thhe RS485 commuunication line iss very safe, Littoo recommend th hat join a isolatio
on
usb-rss485 adapter betwween first inverteer and computer in
i string. of courrse, non isolation rs232-485 adaptter
also can
c work.
41
L
LT 15000/18000/20000HD Insstallation Operaation Manual
The wiring
w diagram bbelow shows how
w to work of man
ny sets inverters in series.
The use
u method of thhe monitor is thee same as the opeeration method oof the 5.2 USB.
42
2
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
7 Fault
F analyssis
In most
m cases, inveerters require very
v little serv
vice. If the invverter is not woorking correctly,
pleasse refer to the fo
following instruuctions before you
y call the locaal dealer or servvice staff.If therre
is an
ny problem, thhe "alarm" on the panel willl be red and L LCD will disp play the relevan nt
inforrmation. Please refer to the folllowing list of potential problemms and solution
ns.
Display Proccessing meth
hod
There is no display
1 Check PV input conneection
on LCD or LLED
Checkk the PV (+) & PV (-) and the direect impedance off the
4 Fault isolation
grounnded PV inverter. Impedance mustt be bigger than 33K.
3
The leakage current is too large, pull ouut the input of thee PV
5 Leakage protecction fault
urrounding AC syystem.
array and check the su
Waarm prompt: whhen the sun is veery weak or no sunlight, the in nverter may
resttart repeatedly or
o shut down, which
w is due to tthe shortage off energy supply,
pleaase don't panic or mistaken as inverter faults.
43
LT 15000/18000/20000HD Installation Operation Manual
8 Warranty
Warranty policy:
Warranty period: Litto PV grid tied inverters from Shenzhen Litto New Energy Co., Ltd are
guaranteed for 24 months, system parts are also guaranteed for 24 months.
Guarantee time start from the date of goods received from our dealer.
Warranty evidence: product serial number and the local dealer's invoice
Note: if the customer does not provide invoices and other documents, Shenzhen Litto New
Energy Co., Ltd. will be based on 2 months after the factory delivery date as the starting
time of the warranty period.
Scope: the occurrence of any damage in the warranty period will be determined by the dealer
and the Litto to determine its scope and responsibilities.
44
Userr’s manual V1.2 Amber series
s three ph
hase Photovolltaic Inverter
45
Userr’s Manual V1.2 Amber Series
S Three-p
phase Photovo
oltaic Inverter
9. Contact infformation
Shennzhen Litto New w Energy Co., Ltd
L
Add:: Bldg. B,bafangyuan Science Park, Sanmin Rd.
R No.3 Rd., S
Shuitian Commu
unity, Shiyan
Streeet, Baoan Distriict, Shenzhen.
Tel: +86-755-817077800
Fax: +86-755-817077809
Emaiil:litto@litto.coom
46
6
User’s manua
al V1.2 Amber series thre
ee phase Phottovoltaic Inverrter
47
4