Professional Documents
Culture Documents
Anvil Branch Outlets
Anvil Branch Outlets
Specifications
Chemical and physical properties are rigidly controlled to ensure
consistently high quality. Physical and chemical test reports are
available on request. Traceability of individual Anvilets can be
established through the heat code of each fitting.
116
www.anvilintl.com
PF-6.13
anvilets
Universal Forged Steel Anvilets
Malleable Iron
Standard & Extra Strong Buttweld
B
OUTLET
BRANCH
Cast Iron
A
ROOT
GAP
C
Small Steel
Fittings
RUN PIPE
Pipe Couplings
Pipe Nipples &
Fittings & Unions
Forged Steel
Dimensions Dimensions
Outlet Size Unit Weight Outlet Size Unit Weight
A B C A B C
NPS DN in mm in mm in mm lbs kg NPS DN in mm in mm in mm lbs kg
⁄
18 6 ⁄
58 16 1 25 0.625 16 0.10 0.05 ⁄
18 6 ⁄
58 16 1 25 0.625 16 0.10 0.05
1⁄4 8 5⁄8 16 1 25 0.625 16 0.10 0.05 1⁄4 8 5⁄8 16 1 25 0.625 16 0.10 0.05
3⁄8 10 3⁄4 19 1 25 0.493 13 0.10 0.05 3⁄8 10 3⁄4 19 1 25 0.423 11 0.10 0.05
Anvilets
1⁄2 15 3⁄4 19 11⁄8 29 0.622 16 0.12 0.05 1⁄2 15 3⁄4 19 11⁄8 29 0.546 14 0.12 0.05
3⁄4 20 7⁄8 22 11⁄2 38 0.824 21 0.22 0.10 3⁄4 20 7⁄8 22 11⁄2 38 0.742 19 0.18 0.08
1 25 11⁄16 27 113⁄16 46 1.062 27 0.32 0.15 1 25 11⁄16 27 213⁄16 71 1.062 27 0.36 0.16
11⁄4 32 11⁄4 32 21⁄4 57 1.380 35 0.64 0.29 11⁄4 32 11⁄4 32 21⁄4 57 1.278 32 0.55 0.25
11⁄2 40 15⁄16 33 29⁄16 65 1.625 41 0.78 0.35 11⁄2 40 15⁄16 33 29⁄16 65 1.625 41 0.68 0.31
2 50 11⁄2 38 35⁄16 84 2.313 59 1.14 0.52 2 50 11⁄2 38 35⁄16 84 2.313 59 1.24 0.56
Catawissa
21⁄2 65 15⁄8 41 321⁄32 93 2.500 64 1.94 0.88 21⁄2 65 15⁄8 41 321⁄32 93 2.500 64 2.26 1.02
3 80 13⁄4 44 49⁄32 109 3.125 79 2.60 1.18 3 80 13⁄4 44 49⁄32 109 3.125 79 2.84 1.29
4 100 2 51 53⁄8 137 4.145 105 4.12 1.87 4 100 2 51 53⁄8 137 4.145 105 4.56 2.07
6 150 23⁄8 60 721⁄32 194 6.112 155 11.00 4.99 6 150 31⁄16 78 723⁄32 196 5.800 147 15.00 6.80
8 200 23⁄4 70 103⁄8 264 8.688 221 28.00 12.70 8 200 37⁄8 98 105⁄8 270 8.688 221 32.00 14.51
www.anvilintl.com 117
PF-6.13
anvilets
Universal Forged Steel Anvilets
XXS, SCH. 160 Buttweld
B
OUTLET
BRANCH
ROOT
GAP
C
RUN PIPE
Buttweld Dimensions
Outlet Size Unit Weight
XXS, Sch. 160 A B C
NPS DN in mm in mm in mm lbs kg
12⁄ 15 11⁄8 29 13⁄8 35 0.563 14 0.25 0.11
3⁄4 20 11⁄4 32 13⁄4 44 0.750 19 0.70 0.32
1 25 11⁄2 38 2 51 1.000 25 0.85 0.39
11⁄4 32 13⁄4 44 27⁄16 62 1.313 33 1.25 0.57
11⁄2 40 2 51 23⁄4 70 1.500 38 1.75 0.79
2 50 23⁄16 56 33⁄16 81 1.688 43 2.15 0.98
21⁄2 65 27⁄16 62 313⁄16 97 2.125 54 3.40 1.54
3 80 27⁄8 73 43⁄4 121 2.875 73 6.30 2.86
4 100 35⁄16 84 6 152 3.875 98 4.56 4.76
Each outlet size listed is available to fit any run curvature. BW Ends per B16.9 and B16.25. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes 6" and less fit a number of run pipe sizes, and the fittings are marked accordingly. See page 121 for run pipe size combination table(s).
SCHEDULES Standard Weight Fittings are the same as schedule 40 fittings through 10". A schedule 40 butt-welded Universal Forged Steel Anvilet for sizes 12" and
larger is available. Dimensions and prices on application. Extra Strong Fittings are the same as schedule 80 fittings through 8". A schedule 80 butt-welded
Universal Forged Steel Anvilet for sizes 10" and larger is available. Dimensions and prices on application. Pipe schedule numbers and weight designations are in
accordance with ASME B36.10.
FLATS Flat butt-welded Universal Forged Steel Anvilet fittings for use on welding caps, elliptical heads and flat surfaces is available.
The A,B and C dimensions given for the Branch Connections in the above Table are for reference only and to be used as a guideline. Dimensions B and C are subject to change depending upon the manufacturing
process utilized. Although every attempt has been made to insure that the information contained in this table is correct, Anvil reserves the right to change the C dimension as deemed necessary.
118
www.anvilintl.com
PF-6.13
anvilets
Universal Forged Steel Anvilets
Malleable Iron
Class 3000 & 6000 Threaded
B
OUTLET
BRANCH
Cast Iron
A
Small Steel
Fittings
C C
RUN
PIPE
Pipe Couplings
Pipe Nipples &
THREADED Class 3000 THREADED Class 6000
Anvilets
1⁄4 8 3⁄4 19 11⁄16 27 0.437 11 0.14 0.06 3⁄4 20 17⁄16 37 21⁄16 52 0.922 24 0.39 0.18
3⁄8 10 13⁄16 21 11⁄16 27 0.578 15 0.14 0.06 1 25 19⁄16 40 217⁄32 64 1.156 31 0.73 0.33
1⁄2 15 1 25 115⁄32 37 0.718 18 0.28 0.13 11⁄4 32 15⁄8 41 21⁄2 64 1.500 40 0.96 0.44
3⁄4 20 11⁄16 27 145⁄64 43 0.922 23 0.39 0.18 11⁄2 40 111⁄16 43 35⁄16 84 1.734 46 1.12 0.51
1 25 15⁄16 33 23⁄32 53 1.156 29 0.73 0.33 2 50 21⁄16 52 331⁄32 101 2.218 59 1.66 0.75
Catawissa
11⁄4 32 15⁄16 33 217⁄32 64 1.500 38 0.96 0.44
11⁄2 40 13⁄8 35 225⁄32 71 1.734 44 1.12 0.51
2 50 11⁄2 38 35⁄16 84 2.218 56 1.66 0.75
21⁄2 65 113⁄16 46 329⁄32 99 2.625 67 2.73 1.24
J.B. Smith Products
3 80 2 51 421⁄32 118 3.250 83 3.88 1.76
4 100 21⁄4 57 513⁄16 148 4.250 108 6.18 2.80
Each outlet size listed is available to fit any run curvature. Threaded ends are in accordance with ANSI/ASME B1.20.1.
Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 121 for run pipe size
combination table(s).
FLATS A flat Threaded Universal Forged Steel Anvilet for use on welding caps, elliptical heads and flat surfaces is available.
The A,B and C dimensions given for the Branch Connections in the above Table are for reference only and to be used as a guideline. Dimensions B and C are subject to change depending upon the manufacturing
process utilized. Although every attempt has been made to insure that the information contained in this table is correct, Anvil reserves the right to change the C dimension as deemed necessary.
www.anvilintl.com 119
PF-6.13
anvilets
Universal Forged Steel Anvilets
Standard & Extra Strong Socket-Weld
E
B
OUTLET
BRANCH
ROOT
GAP
C
RUN PIPE
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 121 for run pipe size
combination table(s).
FLATS A flat Socket-welded Universal Forged Steel Anvilet for use on welding caps, elliptical heads and flat surfaces is available.
The A,B and C dimensions given for the Branch Connections in the above Table are for reference only and to be used as a guideline. Dimensions B and C are subject to change depending upon the manufacturing
process utilized. Although every attempt has been made to insure that the information contained in this table is correct, Anvil reserves the right to change the C dimension as deemed necessary.
120
www.anvilintl.com
PF-6.13
anvilets
Engineering Specifications
Malleable Iron
Universal Forged Steel Anvilets Run Size Combinations
Cast Iron
36 – 3⁄8 36 – 3⁄4 36 – 11⁄4 36 – 21⁄2 11⁄2 – 11⁄4 2 – 11⁄2 31⁄2 – 2 3 – 21⁄2 4–3 4 – 31⁄2 6–5 8
Buttweld
Standard
Small Steel
42 – 36
Fittings
⁄
14 ⁄
38 ⁄ 12 ⁄
34 1 11⁄4 11⁄2 2 21⁄2 3 4 6
36 – 1⁄4 ⁄
38 ⁄ – 1⁄2
34 1 ⁄ – 3⁄4
12 1 2 – 11⁄4 11⁄2 2 2 1⁄2 3 4 6
36 – 1⁄2 36 – 1 36 – 2 11⁄2 – 11⁄4 5 – 21⁄2 3 ⁄2 – 2 3 – 21⁄2 4–3 4 – 31⁄2 6–5 8
Extra Strong
1
Buttweld
36 – 2 36 – 6 36 – 4 6 – 31⁄2 10 – 5 6–5 10 – 8 10
36 – 8 36 – 12 14 – 8 20 – 12 14 – 12
Pipe Couplings
Pipe Nipples &
36 – 1 36 – 22 18 – 16
24 – 20
34 – 26
42 – 36
38 12 14 12
Anvilets
⁄ 14 ⁄ 38 ⁄ 12 ⁄34 1 11⁄4 11⁄2 2 21⁄2 3 4
⁄ – 1⁄4
38 1 – 3⁄8 ⁄ 12 ⁄34 1 1 ⁄ – 11⁄4
12 11⁄2 2 21⁄2 3 4
Class 6000
Threaded
Catawissa
26 – 12 12 – 8 18 – 12
36 – 28 36 – 14 36 – 20
⁄ 14 ⁄ – 3⁄8
12 ⁄ 12 1 ⁄ – 3⁄4
14 1 1 ⁄ – 11⁄4
12 11⁄2 2 21⁄2 3 4
36 – 3⁄8 36 – 3⁄4 36 – 3⁄4 36 – 11⁄2 21⁄2 – 11⁄4 31⁄2 – 2 2 ⁄2 – 2
1 31⁄2 – 21⁄2 3 ⁄2 – 3
1 5 – 31⁄2 6–5
36 – 3 36 – 4 5–3 6–4 6–4 14 – 6 10 – 8
36 – 6 36 – 8 36 – 8 36 – 16 20 – 12
36 – 22
⁄ 14 ⁄ 38 ⁄ 12 ⁄
34 1 11⁄4 11⁄2 2 21⁄2 3 4
Socket-Weld
Class 6000
www.anvilintl.com 121
PF-6.13
anvilets
Universal Elbowlet
Class 3000 and 6000 Buttweld, Threaded and Socket-Weld
H H H
C
C
Universal elbowlets are welded to 90° long radius elbows as branch connections for pipes and fittings. They are also used as pipe hanger or support bosses.
122
www.anvilintl.com
PF-6.13
anvilets
Lateral Anvilets
Malleable Iron
Class 3000 Buttweld and Threaded
Lateral Anvilets provide a strong, readily attached 45° lateral outlet connection.
Cast Iron
Small Steel
Fittings
45
H
Pipe Couplings
Pipe Nipples &
C
B
Anvilets
NPS DN NPS DN in mm in mm in mm lbs kg
⁄
12 15 2 ⁄ – 1 ⁄ / 12 – 3
12 14 65 – 32 / 300 – 80 1⁄38 35 2⁄5 32 55 1⁄7 16 37 0.65 0.29
⁄
34 20 1 ⁄ – 1 ⁄ / 5 – 2 / 12 – 6
12 14 40 – 32 / 125 – 50 / 300 – 150 1 ⁄
11 16 43 2 ⁄
17 32 64 1⁄
34 44 0.75 0.34
1 25 2 ⁄ – 2 / 5 – 3 / 12 – 6
12 65 – 50 / 125 – 80 / 300 – 150 1 ⁄
31 32 50 3 76 2⁄
18 54 1.10 0.52
Catawissa
1⁄14 32 2 ⁄ – 2 / 5 – 3 / 12 – 6
12 65 – 50 / 125 – 80 / 300 – 150 2⁄
9 32 58 3 ⁄
19 32 91 2⁄
58 67 1.90 0.86
1⁄12 40 2 ⁄ – 2 / 5 – 3 / 12 – 6
12 65 – 50 / 125 – 80 / 300 – 150 2 ⁄
15 32 63 3 ⁄
31 32 101 3⁄1 32 77 2.60 1.20
2 50 5 – 4 / 8 – 6 / 12 – 10 125 – 100 / 200 – 150 / 300 – 150 3⁄
3 16 81 5⁄14 133 4⁄
18 105 5.30 2.40
www.anvilintl.com 123
PF-6.13
anvilets
Flat Anvilets
Class 3000 Threaded, Buttweld and Socket-Weld
Flat Anvilets are designed to facilitate welding to a flat surface for the installation of branch pipes or fittings.
Threaded Dimensions
Outlet Size Unit Weight
Class 3000 Flat Anvilet A B
NPS DN in mm in mm lbs kg
⁄
14 8 34⁄ 19 1 25 0.10 0.05
3⁄8 10 13⁄16 21 11⁄4 32 0.20 0.09
B
1⁄2 15 1 25 113⁄32 36 0.25 0.11
3⁄4 20 11⁄16 27 123⁄32 44 0.35 0.16
1 25 15⁄16 33 2 51 0.60 0.27
A
11⁄4 32 15⁄16 33 29⁄16 65 0.90 0.41
11⁄2 40 13⁄8 35 227⁄32 72 1.00 0.45
2 50 11⁄2 38 315⁄32 88 1.75 0.79
THREADED
21⁄2 65 113⁄16 46 41⁄16 103 3.00 1.36
3 80 2 51 413⁄16 122 4.35 1.97
BUTTWELD Dimensions
Outlet Size Unit Weight
Class 3000 Flat Anvilet A B
NPS DN in mm in mm lbs kg
⁄
14 8 ⁄
58 16 1 25 0.10 0.05
B 3⁄8 10 3⁄4 19 11⁄4 32 0.15 0.07
1⁄2 15 3⁄4 19 13⁄8 35 0.20 0.09
3⁄4 20 7⁄8 22 13⁄4 44 0.30 0.14
1 25 11⁄16 27 21⁄8 54 0.50 0.23
A
11⁄4 32 11⁄4 32 29⁄16 65 0.90 0.41
11⁄2 40 15⁄16 33 27⁄8 73 1.10 0.50
BUTTWELD
2 50 11⁄2 38 31⁄2 89 1.75 0.79
21⁄2 65 15⁄8 41 41⁄16 103 2.60 1.18
3 80 13⁄4 44 413⁄16 122 4.10 1.86
socket-weld Dimensions
Outlet Size Unit Weight
Class 3000 Flat Anvilet A B E
NPS DN in mm in mm in mm lbs kg
⁄
14 8 ⁄
34 19 1 25 ⁄
9 32 7 0.10 0.05
3⁄8 10 13⁄16 21 11⁄4 32 7⁄16 11 0.20 0.09
B
1⁄2 15 1 25 113⁄32 36 9⁄16 14 0.30 0.14
3⁄4 20 11⁄16 27 123⁄32 44 9⁄16 14 0.35 0.16
1 25 15⁄16 33 2 51 25⁄32 20 0.60 0.27
A 11⁄4 32 15⁄16 33 29⁄16 65 3⁄4 19 0.85 0.39
E
11⁄2 40 13⁄8 35 227⁄32 72 3⁄4 19 1.00 0.45
2 50 11⁄2 38 315⁄32 88 13⁄16 21 1.60 0.73
SOCKET-WELD
21⁄2 65 19⁄16 40 41⁄16 103 3⁄4 19 2.75 1.25
3 80 13⁄4 44 413⁄16 122 15⁄16 24 3.80 1.72
124
www.anvilintl.com
PF-6.13