Professional Documents
Culture Documents
Technical Info Express: All Machines If PB Appears
Technical Info Express: All Machines If PB Appears
Technical Info Express: All Machines If PB Appears
If when making morning calibration or print you are getting wrong colours, density,
definition. You are probably having a bad rest of the TFT PCB by the PCIHR PCB.
This problem can happened during machine switch on if the PC is on faster than the
TFT PCB. The reset signal is send but the TFT PCB cannot accept it.
To solve this Problem you must add a dongle on the TFT PCB. It will simulate the
reset information 5 seconds later.
Dongle
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.
TECHNICAL INFO EXPRESS
MACHINE : DKS & SYSTEM 88
Date : 26/06/00 SAV IET N°09 V02 ed 02 Page : 2/3
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.
TECHNICAL INFO EXPRESS
MACHINE : DKS & SYSTEM 88
Date : 26/06/00 SAV IET N°09 V02 ed 02 Page : 3/3
End of document
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.