Professional Documents
Culture Documents
Pds Sidistar T120u v181003
Pds Sidistar T120u v181003
Drammensveien 169
NO-0277 OSLO
NORWAY
Tel: +47 22 45 01 00
Fax: +47 22 45 01 11
www.sidistar.com
1. Product Description
SIDISTAR® T120U is a specially designed light-
coloured process modifier consisting of spherical,
submicron particles of amorphous silicon dioxide. The 4. Storage Conditions
nature of the product allows excellent dispersion of The product is recommended to be stored in a covered
these particles in the polymer matrix. This leads to dry place, protected from direct UV light.
improved dispersion of all compound ingredients and a Recommended storage temperature between +5 ºC
better flow, allowing higher extrusion speeds and and +40 ºC (+45ºF and +104ºF) . It’s important that the
smoother surface of the end product.. The product is minimum temperature is > 5ºC (9ºF) above the dew
supplied in an undensified form. point. Recommended relative humidity < 85%.
L-value % ≥ 90.0
** Typical values are for indicational use only, values are not part of Elkem Silicon Materials standard analysis.
SIDISTAR®
THE INORGANIC POLYMER ADDITIVE
This product data sheet is property of Elkem ASA and may not without its written permission be used, copied or
made available to others. The receiver is responsible for any misuse
Revised October 2018 © Copyright Elkem ASA