Professional Documents
Culture Documents
xl4015 Datasheet
xl4015 Datasheet
Pin Configurations
Function Block
L1 47uH/5A
VOUT=1.25*(1+R2/R1)
VIN 5 SW
3
D1 R2 CFF
CC XL4015 MBRD1045G 10K 33nF
105 C2 COUT
105 330uF/25V
VIN VOUT
VC
4 2 FB
CIN C1 1
220uF/50V 105 GND
R1
3.3K
Ordering Information
Order Information Marking ID Package Type Packing Type Supplied As
XL4015E1 XL4015E1 TO263-5L 800 Units on Tape & Reel
XLSEMI Pb-free products, as designated with “E1” suffix in the par number, are RoHS compliant.
Note1: Stresses greater than those listed under Maximum Ratings may cause permanent damage
to the device. This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operation is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
D1 R2 CFF
CC XL4015 MBRD1045G 10K 33nF
105 C2 COUT
105 330uF/25V
VIN VOUT
VC
4 2 FB
CIN C1 1
220uF/50V 105 GND
R1
3.3K
95
90
85
80
Efficiency(%)
75
VIN=8V,VOUT=5V,IOUT=0.1A~5A
70
VIN=12V,VOUT=5V,IOUT=0.1A~5A
65 VIN=24V,VOUT=5V,IOUT=0.1A~5A
VIN=36V,VOUT=5V,IOUT=0.1A~5A
60
55
50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Load current(A)
D1 R2
CC XL4015 MBRD1045G 13K CFF
105 C2 COUT 33nF
105 330uF/25V
VIN VOUT
VC
4 2 FB
CIN C1 1
220uF/50V 105 GND
R1
1.5K
95
90
85
80
Efficiency(%)
75 VIN=15V,VOUT=12V,IOUT=0.1A~4A
VIN=24V,VOUT=12V,IOUT=0.1A~4A
70
VIN=36V,VOUT=12V,IOUT=0.1A~4A
65
60
55
50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output current(A)
D1 R2 CFF
CC XL4015 MBRD1045G 10K 33nF
105 C2 COUT
R3 105 330uF/25V
10K
VC
VIN 4 2 FB
1 VOUT
CIN C1 GND
D2
220uF/50V 105 1N4148
R1
OFF(High>3.3V) 3.3K
ON(Low<0.8V)
Package Information
TO263-5L
Important Notice
XLSEMI reserve the right to make modifications, enhancements, improvements, corrections or
other changes without notice at any time. XLSEMI does not assume any liability arising out of
the application or use of any product described herein; neither does it convey any license under
its patent rights, nor the rights of others. XLSEMI assumes no liability for applications assistance
or the design of Buyers’ products. Buyers are responsible for their products and applications
using XLSEMI components. To minimize the risks associated with Buyers’ products and
applications, Buyers should provide adequate design and operating safeguards. XLSEMI
warrants performance of its products to the specifications applicable at the time of sale, in
accordance with the warranty in XLSEMI’s terms and conditions of sale of semiconductor
products. Testing and other quality control techniques are used to the extent XLSEMI deems
necessary to support this warranty. Except where mandated by applicable law, testing of all
parameters of each component is not necessarily performed.
For the latest product information, go to www.xlsemi.com.